lkml.org 
[lkml]   [2011]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] libata: make ata_sff_data_xfer_noirq() work with 32-bit PIO
Date
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] libata: make ata_sff_data_xfer_noirq() work with 32-bit PIO

Always use ata_sff_data_xfer32() in ata_sff_data_xfer_noirq()
so the latter can be also used for host controllers supporting
32-bit PIO operations.

It is a completely safe thing to do because if 32-bit PIO is
not supported or enabled ata_sff_data_xfer32() will fallback
to a standard method.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
earlier references:
https://lkml.org/lkml/2009/11/25/335

drivers/ata/libata-sff.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

Index: b/drivers/ata/libata-sff.c
===================================================================
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -838,7 +838,7 @@ unsigned int ata_sff_data_xfer_noirq(str
unsigned int consumed;

local_irq_save(flags);
- consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
+ consumed = ata_sff_data_xfer32(dev, buf, buflen, rw);
local_irq_restore(flags);

return consumed;

\
 
 \ /
  Last update: 2011-10-13 15:23    [W:0.022 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site