lkml.org 
[lkml]   [2011]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] pata_serverworks: cleanup cable detection
Date
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_serverworks: cleanup cable detection

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
earlier references:
https://lkml.org/lkml/2010/1/18/324

drivers/ata/pata_serverworks.c | 37 +++++++------------------------------
1 file changed, 7 insertions(+), 30 deletions(-)

Index: b/drivers/ata/pata_serverworks.c
===================================================================
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -57,32 +57,14 @@ static const char *csb_bad_ata100[] = {
};

/**
- * dell_cable - Dell serverworks cable detection
+ * oem_cable - Dell/Sun serverworks cable detection
* @ap: ATA port to do cable detect
*
- * Dell hide the 40/80 pin select for their interfaces in the top two
- * bits of the subsystem ID.
+ * Dell PowerEdge and Sun Cobalt 'Alpine' hide the 40/80 pin select
+ * for their interfaces in the top two bits of the subsystem ID.
*/

-static int dell_cable(struct ata_port *ap)
-{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
- if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
- return ATA_CBL_PATA80;
- return ATA_CBL_PATA40;
-}
-
-/**
- * sun_cable - Sun Cobalt 'Alpine' cable detection
- * @ap: ATA port to do cable select
- *
- * Cobalt CSB5 IDE hides the 40/80pin in the top two bits of the
- * subsystem ID the same as dell. We could use one function but we may
- * need to extend the Dell one in future
- */
-
-static int sun_cable(struct ata_port *ap)
+static int oem_cable(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);

@@ -97,15 +79,10 @@ struct sv_cable_table {
int (*cable_detect)(struct ata_port *ap);
};

-/*
- * Note that we don't copy the old serverworks code because the old
- * code contains obvious mistakes
- */
-
static struct sv_cable_table cable_detect[] = {
- { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, sun_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, oem_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, oem_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, oem_cable },
{ PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, ata_cable_40wire },
{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, ata_cable_unknown },
{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, ata_cable_unknown },

\
 
 \ /
  Last update: 2011-10-11 20:29    [W:0.101 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site