lkml.org 
[lkml]   [2010]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: USB transfer_buffer allocations on 64bit systems
On Fri, 9 Apr 2010, Oliver Neukum wrote:

> Am Freitag, 9. April 2010 16:41:48 schrieb Alan Stern:
> > > It'll work on x86. On incoherent architectures this violates the cacheline
> > > rules for DMA-mapping if you have to bounce.
> >
> > Not true. Consider: The driver allocates a 16-byte buffer (xbuf)
> > divided up into four sets of four bytes, and sets
> >
> > urb[i].transfer_buffer_dma = xbuf_dma + 4*i;
> >
> > Then usb_submit_urb(urb[i]) will copy the appropriate four bytes to a
> > bounce buffer and map the bounce buffer. Accesses to the other parts
> > of xbuf won't violate the cacheline rules, because xbuf isn't mapped
> > for DMA -- only the bounce buffer is. When urb[i] completes, the
> > bounce buffer contents will be copied back to the original four bytes
> > in xbuf. Again, there is no violation of cacheline rules.
>
> I think you are assuming that either every or no part of the buffer is mapped
> for DMA in place. I don't think you can assume that.

Yes I can, because the code that makes this decision is part of
usbcore and it is under my control.

Alan Stern



\
 
 \ /
  Last update: 2010-04-09 17:19    [W:0.082 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site