lkml.org 
[lkml]   [2010]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 6/6] ce4100: Add support for CE4100 EHCI IP block to EHCI driver
In a previous patch in this series GregKH asked that the PCI ID not be added 
to pci_ids.h for ID's that are only used by a single file.
Here is an updated version of the EHCI controller patch.

Subject: [PATCH] ce4100: Add support for CE4100 EHCI IP block to EHCI driver

This patch adds support for the EHCI IP block present on the Intel
CE4100.

Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
CC: linux-usb@vger.kernel.org
CC: David Brownell <dbrownell@users.sourceforge.net>
---
drivers/usb/host/ehci-pci.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index a1e8d27..da2b196 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -124,6 +124,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
ehci_info(ehci, "disable lpm for langwell/penwell\n");
ehci->has_lpm = 0;
}
+ if (pdev->device == 0x2e70) {
+ hcd->has_tt = 1;
+ tdi_reset(ehci);
+ }
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
--
1.7.2.3



\
 
 \ /
  Last update: 2010-11-09 22:49    [W:0.155 / U:1.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site