Messages in this thread | | | Date | Fri, 7 Aug 2009 00:07:26 +0100 | From | Ben Dooks <> | Subject | Re: [PATCH] [ARM] Kirkwood: Marvell OpenRD-Base board support added to v2.6.31-rc5 |
| |
On Thu, Aug 06, 2009 at 07:39:13PM +0530, Dhaval Vasa wrote: > reference: > http://open-rd.org > http://code.google.com/p/openrd > > This patch is tested for: > 1. Boot from DRAM/NAND flash > 2. NAND read/write/erase > 3. GbE0 > 4. USB read/write > > FIXME: > 1. SD/UART1 selection > 2. MPP configuration (currently, default) > 3. PEX > > Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
You forgot to cc: linux-arm-kernel@lists.arm.linux.org.uk, although someone really should issue a MAINTAINERS entry for that machine directory.
> --- > arch/arm/mach-kirkwood/Kconfig | 5 ++ > arch/arm/mach-kirkwood/Makefile | 1 + > arch/arm/mach-kirkwood/openrd_base-setup.c | 79 ++++++++++++++++++++++++++++ > 3 files changed, 85 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-kirkwood/openrd_base-setup.c
call this openrd.c or openrd_base.c, the -setup is redundant as these directories are suposed to have the machine setup files in them.
> diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig > index 25100f7..f2379b3 100644 > --- a/arch/arm/mach-kirkwood/Kconfig > +++ b/arch/arm/mach-kirkwood/Kconfig > @@ -38,6 +38,11 @@ config MACH_TS219 > Say 'Y' here if you want your kernel to support the > QNAP TS-119 and TS-219 Turbo NAS devices. > > +config MACH_OPENRD_BASE > + bool "Marvell OpenRD Base Board" > + help > + Say 'Y' here if you want your kernel to support the > + Marvell OpenRD Base Board. > endmenu > > endif > diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile > index 9dd680e..80ab0ec 100644 > --- a/arch/arm/mach-kirkwood/Makefile > +++ b/arch/arm/mach-kirkwood/Makefile > @@ -6,5 +6,6 @@ obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o > obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o > obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o > obj-$(CONFIG_MACH_TS219) += ts219-setup.o > +obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o > > obj-$(CONFIG_CPU_IDLE) += cpuidle.o > diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c > new file mode 100644 > index 0000000..26b6e58 > --- /dev/null > +++ b/arch/arm/mach-kirkwood/openrd_base-setup.c > @@ -0,0 +1,79 @@ > +/* > + * arch/arm/mach-kirkwood/openrd_base-setup.c > + * > + * Marvell OpenRD Base Board Setup > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > + */ > + > +#include <linux/kernel.h> > +#include <linux/init.h> > +#include <linux/platform_device.h> > +#include <linux/mtd/partitions.h> > +#include <linux/mv643xx_eth.h> > +#include <linux/gpio.h> > +#include <linux/leds.h> > +#include <asm/mach-types.h> > +#include <asm/mach/arch.h> > +#include <mach/kirkwood.h> > +#include <plat/mvsdio.h> > +#include "common.h" > +#include "mpp.h" > + > +static struct mtd_partition openrd_base_nand_parts[] = { > + { > + .name = "u-boot", > + .offset = 0, > + .size = SZ_1M > + }, { > + .name = "uImage", > + .offset = MTDPART_OFS_NXTBLK, > + .size = SZ_4M > + }, { > + .name = "root", > + .offset = MTDPART_OFS_NXTBLK, > + .size = MTDPART_SIZ_FULL > + }, > +}; > + > +static struct mv643xx_eth_platform_data openrd_base_ge00_data = { > + .phy_addr = MV643XX_ETH_PHY_ADDR(8), > +}; > + > +static struct mvsdio_platform_data openrd_base_mvsdio_data = { > + .gpio_card_detect = MPP29_GPIO, /* MPP29 used as SD card detect */ > +}; > + > +static unsigned int openrd_base_mpp_config[] __initdata = { > + 0 > +}; > + > +static void __init openrd_base_init(void) > +{ > + /* > + * Basic setup. Needs to be called early. > + */ > + kirkwood_init(); > + kirkwood_mpp_conf(openrd_base_mpp_config); > + > + kirkwood_uart0_init(); > + kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25); > + > + kirkwood_ehci_init(); > + > + kirkwood_ge00_init(&openrd_base_ge00_data); > + kirkwood_sdio_init(&openrd_base_mvsdio_data); > +} > + > +MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") > + /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ > + .phys_io = KIRKWOOD_REGS_PHYS_BASE, > + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, > + .boot_params = 0x00000100, > + .init_machine = openrd_base_init, > + .map_io = kirkwood_map_io, > + .init_irq = kirkwood_init_irq, > + .timer = &kirkwood_timer, > +MACHINE_END > -- > 1.6.0.6 > > -- > _____________________________________________________________________ > Disclaimer: This e-mail message and all attachments transmitted with it > are intended solely for the use of the addressee and may contain legally > privileged and confidential information. If the reader of this message > is not the intended recipient, or an employee or agent responsible for > delivering this message to the intended recipient, you are hereby > notified that any dissemination, distribution, copying, or other use of > this message or its attachments is strictly prohibited. If you have > received this message in error, please notify the sender immediately by > replying to this message and please delete it from your computer. Any > views expressed in this message are those of the individual sender > unless otherwise stated.Company has taken enough precautions to prevent > the spread of viruses. However the company accepts no liability for any > damage caused by any virus transmitted by this email. > _____________________________________________________________________ > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/
-- Ben (ben@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
| |