lkml.org 
[lkml]   [2009]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/7] sd: add support for WRITE SAME (16) with unmap bit
Hello.

Christoph Hellwig wrote:

> Add a prepare_discard function to sd that sends a WRITE SAME request with
> the unmap bit set to the device if it advertises thin provisioning support.
>
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
>
> Index: linux-2.6/drivers/scsi/sd.c
> ===================================================================
> --- linux-2.6.orig/drivers/scsi/sd.c 2009-08-29 19:19:36.067371669 -0300
> +++ linux-2.6/drivers/scsi/sd.c 2009-08-29 19:26:20.723754241 -0300
> @@ -911,6 +911,50 @@ static void sd_prepare_flush(struct requ
> rq->cmd_len = 10;
> }
>
> +static int sd_prepare_discard(struct request_queue *q, struct request *rq,
> + struct bio *bio)
> +{
> + struct scsi_device *sdp = q->queuedata;
> + struct page *page = alloc_page(GFP_KERNEL);
> +
> + if (!page)
> + return -ENOMEM;
> +
> + rq->cmd_type = REQ_TYPE_BLOCK_PC;
> + rq->timeout = SD_TIMEOUT;
> + rq->cmd[0] = WRITE_SAME_16;
> + rq->cmd[1] = 0x8; /* UNMAP bit */
> + rq->cmd[2] = sizeof(bio->bi_sector) > 4 ?
> + (unsigned char) (bio->bi_sector >> 56) & 0xff : 0;
> + rq->cmd[3] = sizeof(bio->bi_sector) > 4 ?
> + (unsigned char) (bio->bi_sector >> 48) & 0xff : 0;
> + rq->cmd[4] = sizeof(bio->bi_sector) > 4 ?
> + (unsigned char) (bio->bi_sector >> 40) & 0xff : 0;
> + rq->cmd[5] = sizeof(bio->bi_sector) > 4 ?
> + (unsigned char) (bio->bi_sector >> 32) & 0xff : 0;
> + rq->cmd[6] = (unsigned char) (bio->bi_sector >> 24) & 0xff;
> + rq->cmd[7] = (unsigned char) (bio->bi_sector >> 16) & 0xff;
> + rq->cmd[8] = (unsigned char) (bio->bi_sector >> 8) & 0xff;
> + rq->cmd[9] = (unsigned char) bio->bi_sector & 0xff;
> + rq->cmd[10] = (unsigned char) (bio_sectors(bio) >> 24) & 0xff;
> + rq->cmd[11] = (unsigned char) (bio_sectors(bio) >> 16) & 0xff;
> + rq->cmd[12] = (unsigned char) (bio_sectors(bio) >> 8) & 0xff;
> + rq->cmd[13] = (unsigned char) bio_sectors(bio) & 0xff;
> + rq->cmd[14] = 0;
> + rq->cmd[15] = 0;
> + rq->cmd_len = 16;
> +
> + printk(KERN_INFO "umap, lba = 0x%lld, len = %d\n",
>

So, is it hex or decimal? :-)

> + bio->bi_sector, bio_sectors(bio));
>

Since bio->bi_sector can either be 4 or 8 bytes, you need a cast to
unsigned long long here.

MBR, Sergei




\
 
 \ /
  Last update: 2009-08-30 13:15    [W:0.123 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site