lkml.org 
[lkml]   [2009]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] [MTD] driver/Makefile: Initialize "mtd" and "spi" before "net"
Date
On TI's da850/omap-l138 EVM, MAC address is stored in SPI flash.

This patch changes the initialization sequence of the drivers
by moving mtd and spi ahead of net in drivers/Makefile thereby
enabling da850/omap-l138 ethernet driver to read the MAC address
while booting.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
---
drivers/Makefile | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/Makefile b/drivers/Makefile
index bc4205d..2a1d41f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -42,6 +42,8 @@ obj-y += macintosh/
obj-$(CONFIG_IDE) += ide/
obj-$(CONFIG_SCSI) += scsi/
obj-$(CONFIG_ATA) += ata/
+obj-$(CONFIG_MTD) += mtd/
+obj-$(CONFIG_SPI) += spi/
obj-y += net/
obj-$(CONFIG_ATM) += atm/
obj-$(CONFIG_FUSION) += message/
@@ -50,8 +52,6 @@ obj-y += ieee1394/
obj-$(CONFIG_UIO) += uio/
obj-y += cdrom/
obj-y += auxdisplay/
-obj-$(CONFIG_MTD) += mtd/
-obj-$(CONFIG_SPI) += spi/
obj-$(CONFIG_PCCARD) += pcmcia/
obj-$(CONFIG_DIO) += dio/
obj-$(CONFIG_SBUS) += sbus/
--
1.5.6


\
 
 \ /
  Last update: 2009-08-18 09:11    [W:0.035 / U:1.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site