Messages in this thread | | | Date | Sun, 20 Dec 2009 00:23:14 +0200 (EET) | From | Meelis Roos <> | Subject | pata_cmd64x broken in 2.6.33-rc1 on sparc64 |
| |
This running on Sun Ultra 5 with CMD646 onboard ide.
scsi0 : pata_cmd64x scsi1 : pata_cmd64x ata1: PATA max MWDMA2 cmd 0x1fe02c00000 ctl 0x1fe02c00008 bmdma 0x1fe02c00020 irq 14 ata2: PATA max MWDMA2 cmd 0x1fe02c00010 ctl 0x1fe02c00018 bmdma 0x1fe02c00028 irq 14 pata_cmd64x: active 10 recovery 10 setup 3. pata_cmd64x: active 10 recovery 10 setup 3. PCI: Enabling device: (0000:01:01.1), cmd 2 sunhme.c:v3.10 August 26, 2008 David S. Miller (davem@davemloft.net) eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:f8:c7:72 mice: PS/2 mouse device common for all mice ------------[ cut here ]------------ WARNING: at drivers/ata/pata_cmd64x.c:268 cmd64x_bmdma_stop+0x3c/0x60() Modules linked in: Call Trace: [000000000064987c] cmd64x_bmdma_stop+0x3c/0x60 [0000000000644610] ata_sff_post_internal_cmd+0x30/0x60 [0000000000635910] ata_exec_internal_sg+0x310/0x4e0 [0000000000635b30] ata_exec_internal+0x50/0x80 [0000000000635ddc] ata_do_dev_read_id+0x1c/0x40 [0000000000635fb0] ata_dev_read_id+0x1b0/0x5c0 [00000000006423a8] ata_eh_recover+0x5c8/0x1280 [0000000000643288] ata_do_eh+0x28/0xa0 [0000000000643e94] ata_scsi_error+0x374/0x600 [00000000006221ec] scsi_error_handler+0xcc/0x460 [000000000046fdc0] kthread+0x60/0x80 [000000000042b4b0] kernel_thread+0x30/0x60 [000000000046fd1c] kthreadd+0x9c/0xe0 ---[ end trace 61a1d617a7f4a94d ]--- rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t59 as rtc0 TCP cubic registered NET: Registered protocol family 17 registered taskstats version 1 rtc-m48t59 rtc-m48t59.0: setting system clock to 2009-12-19 22:14:41 UTC (1261260881) ------------[ cut here ]------------ WARNING: at drivers/ata/pata_cmd64x.c:268 cmd64x_bmdma_stop+0x3c/0x60() Modules linked in: Call Trace: [000000000064987c] cmd64x_bmdma_stop+0x3c/0x60 [0000000000644610] ata_sff_post_internal_cmd+0x30/0x60 [0000000000635910] ata_exec_internal_sg+0x310/0x4e0 [0000000000635b30] ata_exec_internal+0x50/0x80 [0000000000636e1c] ata_dev_configure+0x63c/0x1780 [0000000000642604] ata_eh_recover+0x824/0x1280 [0000000000643288] ata_do_eh+0x28/0xa0 [0000000000643e94] ata_scsi_error+0x374/0x600 [00000000006221ec] scsi_error_handler+0xcc/0x460 [000000000046fdc0] kthread+0x60/0x80 [000000000042b4b0] kernel_thread+0x30/0x60 [000000000046fd1c] kthreadd+0x9c/0xe0 ---[ end trace 61a1d617a7f4a94f ]--- ata1.00: HPA detected: current 234375000, native 234441648 ata1.00: ATA-5: WDC WD1200JB-75CRA0, 16.06V16, max UDMA/100 ata1.00: 234375000 sectors, multi 0: LBA pata_cmd64x: active 3 recovery 1 setup 1. pata_cmd64x: active 3 recovery 1 setup 1. input: Sun Mouse as /devices/root/f005f9c0/f00601b4/f0061504/f0064df4/serio1/input/input0 ------------[ cut here ]------------ WARNING: at drivers/ata/pata_cmd64x.c:268 cmd64x_bmdma_stop+0x3c/0x60() Modules linked in: Call Trace: [000000000064987c] cmd64x_bmdma_stop+0x3c/0x60 [0000000000644610] ata_sff_post_internal_cmd+0x30/0x60 [0000000000635910] ata_exec_internal_sg+0x310/0x4e0 [0000000000635b30] ata_exec_internal+0x50/0x80 [000000000063888c] ata_do_set_mode+0x6cc/0xb00 [000000000063f164] ata_set_mode+0x144/0x160 [0000000000642cf4] ata_eh_recover+0xf14/0x1280 [0000000000643288] ata_do_eh+0x28/0xa0 [0000000000643e94] ata_scsi_error+0x374/0x600 [00000000006221ec] scsi_error_handler+0xcc/0x460 [000000000046fdc0] kthread+0x60/0x80 [000000000042b4b0] kernel_thread+0x30/0x60 [000000000046fd1c] kthreadd+0x9c/0xe0 ---[ end trace 61a1d617a7f4a950 ]--- ------------[ cut here ]------------ WARNING: at drivers/ata/pata_cmd64x.c:268 cmd64x_bmdma_stop+0x3c/0x60() Modules linked in: Call Trace: [000000000064987c] cmd64x_bmdma_stop+0x3c/0x60 [0000000000644610] ata_sff_post_internal_cmd+0x30/0x60 [0000000000635910] ata_exec_internal_sg+0x310/0x4e0 [0000000000635b30] ata_exec_internal+0x50/0x80 [0000000000635ddc] ata_do_dev_read_id+0x1c/0x40 [0000000000635fb0] ata_dev_read_id+0x1b0/0x5c0 [00000000006365b0] ata_dev_reread_id+0x30/0x1a0 [0000000000638004] ata_dev_revalidate+0xa4/0x260 [00000000006388bc] ata_do_set_mode+0x6fc/0xb00 [000000000063f164] ata_set_mode+0x144/0x160 [0000000000642cf4] ata_eh_recover+0xf14/0x1280 [0000000000643288] ata_do_eh+0x28/0xa0 [0000000000643e94] ata_scsi_error+0x374/0x600 [00000000006221ec] scsi_error_handler+0xcc/0x460 [000000000046fdc0] kthread+0x60/0x80 [000000000042b4b0] kernel_thread+0x30/0x60 ---[ end trace 61a1d617a7f4a951 ]--- ------------[ cut here ]------------ WARNING: at drivers/ata/pata_cmd64x.c:268 cmd64x_bmdma_stop+0x3c/0x60() Modules linked in: Call Trace: [000000000064987c] cmd64x_bmdma_stop+0x3c/0x60 [0000000000644610] ata_sff_post_internal_cmd+0x30/0x60 [0000000000635910] ata_exec_internal_sg+0x310/0x4e0 [0000000000635b30] ata_exec_internal+0x50/0x80 [0000000000636e1c] ata_dev_configure+0x63c/0x1780 [00000000006380d4] ata_dev_revalidate+0x174/0x260 [00000000006388bc] ata_do_set_mode+0x6fc/0xb00 [000000000063f164] ata_set_mode+0x144/0x160 [0000000000642cf4] ata_eh_recover+0xf14/0x1280 [0000000000643288] ata_do_eh+0x28/0xa0 [0000000000643e94] ata_scsi_error+0x374/0x600 [00000000006221ec] scsi_error_handler+0xcc/0x460 [000000000046fdc0] kthread+0x60/0x80 [000000000042b4b0] kernel_thread+0x30/0x60 [000000000046fd1c] kthreadd+0x9c/0xe0 ---[ end trace 61a1d617a7f4a952 ]--- ata1.00: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA WDC WD1200JB-75C 16.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234375000 512-byte logical blocks: (120 GB/111 GiB) pata_cmd64x: active 10 recovery 10 setup 3. pata_cmd64x: active 10 recovery 10 setup 3. sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ------------[ cut here ]------------ WARNING: at drivers/ata/pata_cmd64x.c:268 cmd64x_bmdma_stop+0x3c/0x60() Modules linked in: Call Trace: [000000000064987c] cmd64x_bmdma_stop+0x3c/0x60 [0000000000644610] ata_sff_post_internal_cmd+0x30/0x60 [0000000000635910] ata_exec_internal_sg+0x310/0x4e0 [0000000000635b30] ata_exec_internal+0x50/0x80 [0000000000635ddc] ata_do_dev_read_id+0x1c/0x40 [0000000000635fb0] ata_dev_read_id+0x1b0/0x5c0 [00000000006423a8] ata_eh_recover+0x5c8/0x1280 [0000000000643288] ata_do_eh+0x28/0xa0 [0000000000643e94] ata_scsi_error+0x374/0x600 [00000000006221ec] scsi_error_handler+0xcc/0x460 [000000000046fdc0] kthread+0x60/0x80 [000000000042b4b0] kernel_thread+0x30/0x60 [000000000046fd1c] kthreadd+0x9c/0xe0 ---[ end trace 61a1d617a7f4a953 ]--- ata2.00: ATAPI: CRD-8322B, 1.06, max MWDMA2 pata_cmd64x: active 3 recovery 1 setup 1. pata_cmd64x: active 3 recovery 1 setup 1. sda:
and hangs here.
-- Meelis Roos (mroos@linux.ee)
| |