lkml.org 
[lkml]   [2008]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] MN10300: Move asm-arm/cnt32_to_63.h to include/linux/
Date
Move asm-arm/cnt32_to_63.h to include/linux/ so that MN10300 can make use of it
too.

Signed-off-by: David Howells <dhowells@redhat.com>
---

arch/arm/mach-pxa/time.c | 2 +
arch/arm/mach-sa1100/generic.c | 2 +
arch/arm/mach-versatile/core.c | 2 +
include/linux/cnt32_to_63.h | 80 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 83 insertions(+), 3 deletions(-)
create mode 100644 include/linux/cnt32_to_63.h


diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 67e1850..b0d6b32 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -17,9 +17,9 @@
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>

#include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <mach/pxa-regs.h>
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 1362994..b422526 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -18,9 +18,9 @@
#include <linux/ioport.h>
#include <linux/sched.h> /* just for sched_clock() - funny that */
#include <linux/platform_device.h>
+#include <linux/cnt32_to_63.h>

#include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index d75e795..b638f10 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -28,8 +28,8 @@
#include <linux/amba/clcd.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/cnt32_to_63.h>

-#include <asm/cnt32_to_63.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/io.h>
diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h
new file mode 100644
index 0000000..8c0f950
--- /dev/null
+++ b/include/linux/cnt32_to_63.h
@@ -0,0 +1,80 @@
+/*
+ * Extend a 32-bit counter to 63 bits
+ *
+ * Author: Nicolas Pitre
+ * Created: December 3, 2006
+ * Copyright: MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_CNT32_TO_63_H__
+#define __LINUX_CNT32_TO_63_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/* this is used only to give gcc a clue about good code generation */
+union cnt32_to_63 {
+ struct {
+#if defined(__LITTLE_ENDIAN)
+ u32 lo, hi;
+#elif defined(__BIG_ENDIAN)
+ u32 hi, lo;
+#endif
+ };
+ u64 val;
+};
+
+
+/**
+ * cnt32_to_63 - Expand a 32-bit counter to a 63-bit counter
+ * @cnt_lo: The low part of the counter
+ *
+ * Many hardware clock counters are only 32 bits wide and therefore have
+ * a relatively short period making wrap-arounds rather frequent. This
+ * is a problem when implementing sched_clock() for example, where a 64-bit
+ * non-wrapping monotonic value is expected to be returned.
+ *
+ * To overcome that limitation, let's extend a 32-bit counter to 63 bits
+ * in a completely lock free fashion. Bits 0 to 31 of the clock are provided
+ * by the hardware while bits 32 to 62 are stored in memory. The top bit in
+ * memory is used to synchronize with the hardware clock half-period. When
+ * the top bit of both counters (hardware and in memory) differ then the
+ * memory is updated with a new value, incrementing it when the hardware
+ * counter wraps around.
+ *
+ * Because a word store in memory is atomic then the incremented value will
+ * always be in synch with the top bit indicating to any potential concurrent
+ * reader if the value in memory is up to date or not with regards to the
+ * needed increment. And any race in updating the value in memory is harmless
+ * as the same value would simply be stored more than once.
+ *
+ * The only restriction for the algorithm to work properly is that this
+ * code must be executed at least once per each half period of the 32-bit
+ * counter to properly update the state bit in memory. This is usually not a
+ * problem in practice, but if it is then a kernel timer could be scheduled
+ * to manage for this code to be executed often enough.
+ *
+ * Note that the top bit (bit 63) in the returned value should be considered
+ * as garbage. It is not cleared here because callers are likely to use a
+ * multiplier on the returned value which can get rid of the top bit
+ * implicitly by making the multiplier even, therefore saving on a runtime
+ * clear-bit instruction. Otherwise caller must remember to clear the top
+ * bit explicitly.
+ */
+#define cnt32_to_63(cnt_lo) \
+({ \
+ static volatile u32 __m_cnt_hi; \
+ union cnt32_to_63 __x; \
+ __x.hi = __m_cnt_hi; \
+ __x.lo = (cnt_lo); \
+ if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
+ __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
+ __x.val; \
+})
+
+#endif


\
 
 \ /
  Last update: 2008-09-24 18:53    [W:1.017 / U:2.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site