lkml.org 
[lkml]   [2008]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[x86-tip, patch] rework of the microcode splitup
From
Date

Ingo, Peter,


this version is slightly different from the current one in -tip (added missing vfree()).

I have tested it only with "microcode_ctl" (update via /dev/cpu/microcode).

Since my CPUs already have the revision equal to the recent microcode revision
from Intel, I temporarily altered the logic of checks in order to verify that
the correct microcode file is found and applied. That proved to work well.

Peter: please take a look at the "microcode_amd" part, esp. 2 "FIXME" notes.


todo (not dependent on this patch):
- perhaps, move arch-specific structures from microcode.h to arch-specific *.c files;
- remove union in struct ucode_cpu_info;
- see how we could apply microcode as early as possible;
- don't use set_cpus_allowed()

anyway, I think this new interface is cleaner and better maintainability-wise.

4 files changed, 304 insertions(+), 362 deletions(-)

---

From: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Subject: x86-microcode, rework of the microcode splitup

x86, microcode rework, v2

this is a rework of the microcode splitup in tip/x86/microcode

This new interface is supposed to be cleaner and better maintainability-wise;

4 files changed, 304 insertions(+), 362 deletions(-)


--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -70,8 +70,9 @@
* Fix sigmatch() macro to handle old CPUs with pf == 0.
* Thanks to Stuart Swales for pointing out this bug.
*/
-
-/* #define DEBUG pr_debug */
+#if 0
+#define DEBUG /* pr_debug */
+#endif
#include <linux/capability.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -110,50 +111,28 @@ struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
EXPORT_SYMBOL_GPL(ucode_cpu_info);

#ifdef CONFIG_MICROCODE_OLD_INTERFACE
-void __user *user_buffer; /* user area microcode data buffer */
-EXPORT_SYMBOL_GPL(user_buffer);
-unsigned int user_buffer_size; /* it's size */
-EXPORT_SYMBOL_GPL(user_buffer_size);
-
-static int do_microcode_update(void)
+static int do_microcode_update(const void __user *buf, size_t size)
{
- long cursor = 0;
+ cpumask_t old;
int error = 0;
- void *new_mc = NULL;
int cpu;
- cpumask_t old;

old = current->cpus_allowed;

- while ((cursor = microcode_ops->get_next_ucode(&new_mc, cursor)) > 0) {
- if (microcode_ops->microcode_sanity_check != NULL)
- error = microcode_ops->microcode_sanity_check(new_mc);
- if (error)
+ for_each_online_cpu(cpu) {
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ if (!uci->valid)
+ continue;
+
+ set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+ error = microcode_ops->request_microcode_user(cpu, buf, size);
+ if (error < 0)
goto out;
- /*
- * It's possible the data file has multiple matching ucode,
- * lets keep searching till the latest version
- */
- for_each_online_cpu(cpu) {
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
- if (!uci->valid)
- continue;
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
- error = microcode_ops->get_matching_microcode(new_mc,
- cpu);
- if (error < 0)
- goto out;
- if (error == 1)
- microcode_ops->apply_microcode(cpu);
- }
- vfree(new_mc);
+ if (!error)
+ microcode_ops->apply_microcode(cpu);
}
out:
- if (cursor > 0)
- vfree(new_mc);
- if (cursor < 0)
- error = cursor;
set_cpus_allowed_ptr(current, &old);
return error;
}
@@ -178,10 +157,7 @@ static ssize_t microcode_write(struct file *file, const char __user *buf,
get_online_cpus();
mutex_lock(&microcode_mutex);

- user_buffer = (void __user *) buf;
- user_buffer_size = (int) len;
-
- ret = do_microcode_update();
+ ret = do_microcode_update(buf, len);
if (!ret)
ret = (ssize_t)len;

@@ -231,7 +207,6 @@ MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);

/* fake device for request_firmware */
struct platform_device *microcode_pdev;
-EXPORT_SYMBOL_GPL(microcode_pdev);

static ssize_t reload_store(struct sys_device *dev,
struct sysdev_attribute *attr,
@@ -252,8 +227,12 @@ static ssize_t reload_store(struct sys_device *dev,
if (cpu_online(cpu)) {
set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
mutex_lock(&microcode_mutex);
- if (uci->valid)
- err = microcode_ops->cpu_request_microcode(cpu);
+ if (uci->valid) {
+ err = microcode_ops->request_microcode_fw(cpu,
+ &microcode_pdev->dev);
+ if (!err)
+ microcode_ops->apply_microcode(cpu);
+ }
mutex_unlock(&microcode_mutex);
set_cpus_allowed_ptr(current, &old);
}
@@ -315,7 +294,7 @@ static void collect_cpu_info(int cpu)
uci->valid = 1;
}

-static void microcode_resume_cpu(int cpu)
+static int microcode_resume_cpu(int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
struct cpu_signature nsig;
@@ -323,7 +302,7 @@ static void microcode_resume_cpu(int cpu)
pr_debug("microcode: CPU%d resumed\n", cpu);

if (!uci->mc.valid_mc)
- return;
+ return 1;

/*
* Let's verify that the 'cached' ucode does belong
@@ -331,21 +310,22 @@ static void microcode_resume_cpu(int cpu)
*/
if (microcode_ops->collect_cpu_info(cpu, &nsig)) {
microcode_fini_cpu(cpu);
- return;
+ return -1;
}

if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) {
microcode_fini_cpu(cpu);
/* Should we look for a new ucode here? */
- return;
+ return 1;
}

- microcode_ops->apply_microcode(cpu);
+ return 0;
}

void microcode_update_cpu(int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ int err = 0;

/* We should bind the task to the CPU */
BUG_ON(raw_smp_processor_id() != cpu);
@@ -356,12 +336,17 @@ void microcode_update_cpu(int cpu)
* otherwise just request a firmware:
*/
if (uci->valid) {
- microcode_resume_cpu(cpu);
+ err = microcode_resume_cpu(cpu);
} else {
collect_cpu_info(cpu);
if (uci->valid && system_state == SYSTEM_RUNNING)
- microcode_ops->cpu_request_microcode(cpu);
+ err = microcode_ops->request_microcode_fw(cpu,
+ &microcode_pdev->dev);
}
+
+ if (!err)
+ microcode_ops->apply_microcode(cpu);
+
mutex_unlock(&microcode_mutex);
}

@@ -412,9 +397,9 @@ static int mc_sysdev_resume(struct sys_device *dev)

if (!cpu_online(cpu))
return 0;
- pr_debug("microcode: CPU%d resumed\n", cpu);
+
/* only CPU 0 will apply ucode here */
- microcode_ops->apply_microcode(0);
+ microcode_update_cpu(0);
return 0;
}

diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index d606a05..48aec9f 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -59,7 +59,7 @@ MODULE_LICENSE("GPL v2");
/* serialize access to the physical write */
static DEFINE_SPINLOCK(microcode_update_lock);

-struct equiv_cpu_entry *equiv_cpu_table;
+static struct equiv_cpu_entry *equiv_cpu_table;

static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
{
@@ -83,36 +83,37 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
return 0;
}

-static int get_matching_microcode_amd(void *mc, int cpu)
+static int get_matching_microcode(int cpu, void *mc, int rev)
{
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
struct microcode_header_amd *mc_header = mc;
- unsigned long total_size = get_totalsize(mc_header);
- void *new_mc;
struct pci_dev *nb_pci_dev, *sb_pci_dev;
unsigned int current_cpu_id;
unsigned int equiv_cpu_id = 0x00;
unsigned int i = 0;

- /* We should bind the task to the CPU */
- BUG_ON(cpu != raw_smp_processor_id());
-
- /* This is a tricky part. We might be called from a write operation */
- /* to the device file instead of the usual process of firmware */
- /* loading. This routine needs to be able to distinguish both */
-/* cases. This is done by checking if there alread is a equivalent */
- /* CPU table installed. If not, we're written through */
- /* /dev/cpu/microcode. */
-/* Since we ignore all checks. The error case in which going through */
-/* firmware loading and that table is not loaded has already been */
- /* checked earlier. */
+ /*
+ * FIXME! dimm: do we need this? Why an update via /dev/... is different
+ * from the one via firmware?
+ *
+ * This is a tricky part. We might be called from a write operation
+ * to the device file instead of the usual process of firmware
+ * loading. This routine needs to be able to distinguish both
+ * cases. This is done by checking if there alread is a equivalent
+ * CPU table installed. If not, we're written through
+ * /dev/cpu/microcode.
+ * Since we ignore all checks. The error case in which going through
+ * firmware loading and that table is not loaded has already been
+ * checked earlier.
+ */
+ BUG_ON(equiv_cpu_table == NULL);
+#if 0
if (equiv_cpu_table == NULL) {
printk(KERN_INFO "microcode: CPU%d microcode update with "
"version 0x%x (current=0x%x)\n",
cpu, mc_header->patch_id, uci->cpu_sig.rev);
goto out;
}
-
+#endif
current_cpu_id = cpuid_eax(0x00000001);

while (equiv_cpu_table[i].installed_cpu != 0) {
@@ -175,27 +176,9 @@ static int get_matching_microcode_amd(void *mc, int cpu)
pci_dev_put(sb_pci_dev);
}

- if (mc_header->patch_id <= uci->cpu_sig.rev)
+ if (mc_header->patch_id <= rev)
return 0;

- printk(KERN_INFO "microcode: CPU%d found a matching microcode "
- "update with version 0x%x (current=0x%x)\n",
- cpu, mc_header->patch_id, uci->cpu_sig.rev);
-
-out:
- new_mc = vmalloc(UCODE_MAX_SIZE);
- if (!new_mc) {
- printk(KERN_ERR "microcode: error, can't allocate memory\n");
- return -ENOMEM;
- }
- memset(new_mc, 0, UCODE_MAX_SIZE);
-
- /* free previous update file */
- vfree(uci->mc.mc_amd);
-
- memcpy(new_mc, mc, total_size);
-
- uci->mc.mc_amd = new_mc;
return 1;
}

@@ -245,104 +228,65 @@ static void apply_microcode_amd(int cpu)
uci->cpu_sig.rev = rev;
}

-#ifdef CONFIG_MICROCODE_OLD_INTERFACE
-extern void __user *user_buffer; /* user area microcode data buffer */
-extern unsigned int user_buffer_size; /* it's size */
-
-static long get_next_ucode_amd(void **mc, long offset)
-{
- struct microcode_header_amd mc_header;
- unsigned long total_size;
-
- /* No more data */
- if (offset >= user_buffer_size)
- return 0;
- if (copy_from_user(&mc_header, user_buffer + offset, MC_HEADER_SIZE)) {
- printk(KERN_ERR "microcode: error! Can not read user data\n");
- return -EFAULT;
- }
- total_size = get_totalsize(&mc_header);
- if (offset + total_size > user_buffer_size) {
- printk(KERN_ERR "microcode: error! Bad total size in microcode "
- "data file\n");
- return -EINVAL;
- }
- *mc = vmalloc(UCODE_MAX_SIZE);
- if (!*mc)
- return -ENOMEM;
- memset(*mc, 0, UCODE_MAX_SIZE);
-
- if (copy_from_user(*mc, user_buffer + offset, total_size)) {
- printk(KERN_ERR "microcode: error! Can not read user data\n");
- vfree(*mc);
- return -EFAULT;
- }
- return offset + total_size;
-}
-#else
-#define get_next_ucode_amd() NULL
-#endif
-
-static long get_next_ucode_from_buffer_amd(void **mc, void *buf,
- unsigned long size, long offset)
+static void * get_next_ucode(u8 *buf, unsigned int size,
+ int (*get_ucode_data)(void *, const void *, size_t),
+ unsigned int *mc_size)
{
- struct microcode_header_amd *mc_header;
- unsigned long total_size;
- unsigned char *buf_pos = buf;
+ unsigned int total_size;
+#define UCODE_UNKNOWN_HDR 8
+ u8 hdr[UCODE_UNKNOWN_HDR];
+ void *mc;

- /* No more data */
- if (offset >= size)
- return 0;
+ if (get_ucode_data(hdr, buf, UCODE_UNKNOWN_HDR))
+ return NULL;

- if (buf_pos[offset] != UCODE_UCODE_TYPE) {
+ if (hdr[0] != UCODE_UCODE_TYPE) {
printk(KERN_ERR "microcode: error! "
"Wrong microcode payload type field\n");
- return -EINVAL;
+ return NULL;
}

- mc_header = (struct microcode_header_amd *)(&buf_pos[offset+8]);
+ /* FIXME! dimm: Why not by means of get_totalsize(hdr)? */
+ total_size = (unsigned long) (hdr[4] + (hdr[5] << 8));

- total_size = (unsigned long) (buf_pos[offset+4] +
- (buf_pos[offset+5] << 8));
+ printk(KERN_INFO "microcode: size %u, total_size %u\n",
+ size, total_size);

- printk(KERN_INFO "microcode: size %lu, total_size %lu, offset %ld\n",
- size, total_size, offset);
-
- if (offset + total_size > size) {
+ if (total_size > size || total_size > UCODE_MAX_SIZE) {
printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
- return -EINVAL;
+ return NULL;
}

- *mc = vmalloc(UCODE_MAX_SIZE);
- if (!*mc) {
- printk(KERN_ERR "microcode: error! "
- "Can not allocate memory for microcode patch\n");
- return -ENOMEM;
+ mc = vmalloc(UCODE_MAX_SIZE);
+ if (mc) {
+ memset(mc, 0, UCODE_MAX_SIZE);
+ if (get_ucode_data(mc, buf + UCODE_UNKNOWN_HDR, total_size)) {
+ vfree(mc);
+ mc = NULL;
+ } else
+ *mc_size = total_size + UCODE_UNKNOWN_HDR;
}
-
- memset(*mc, 0, UCODE_MAX_SIZE);
- memcpy(*mc, buf + offset + 8, total_size);
-
- return offset + total_size + 8;
+#undef UCODE_UNKNOWN_HDR
+ return mc;
}

-static long install_equiv_cpu_table(void *buf, unsigned long size, long offset)
+
+static int install_equiv_cpu_table(u8 *buf,
+ int (*get_ucode_data)(void *, const void *, size_t))
{
- unsigned int *buf_pos = buf;
+#define UCODE_HEADER_SIZE 12
+ u8 *hdr[UCODE_HEADER_SIZE];
+ unsigned int *buf_pos = (unsigned int *)hdr;
+ unsigned long size;

- /* No more data */
- if (offset >= size)
+ if (get_ucode_data(&hdr, buf, UCODE_HEADER_SIZE))
return 0;

- if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE) {
- printk(KERN_ERR "microcode: error! "
- "Wrong microcode equivalnet cpu table type field\n");
- return 0;
- }
+ size = buf_pos[2];

- if (size == 0) {
+ if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) {
printk(KERN_ERR "microcode: error! "
- "Wrong microcode equivalnet cpu table length\n");
+ "Wrong microcode equivalnet cpu table\n");
return 0;
}

@@ -352,79 +296,120 @@ static long install_equiv_cpu_table(void *buf, unsigned long size, long offset)
return 0;
}

- memset(equiv_cpu_table, 0, size);
- memcpy(equiv_cpu_table, &buf_pos[3], size);
+ buf += UCODE_HEADER_SIZE;
+ if (get_ucode_data(equiv_cpu_table, buf, size)) {
+ vfree(equiv_cpu_table);
+ return 0;
+ }

- return size + 12; /* add header length */
+ return size + UCODE_HEADER_SIZE; /* add header length */
+#undef UCODE_HEADER_SIZE
}

-/* fake device for request_firmware */
-extern struct platform_device *microcode_pdev;
-
-static int cpu_request_microcode_amd(int cpu)
+static void free_equiv_cpu_table(void)
{
- char name[30];
- const struct firmware *firmware;
- void *buf;
- unsigned int *buf_pos;
- unsigned long size;
- long offset = 0;
- int error;
- void *mc;
-
- /* We should bind the task to the CPU */
- BUG_ON(cpu != raw_smp_processor_id());
-
- sprintf(name, "amd-ucode/microcode_amd.bin");
- error = request_firmware(&firmware, "amd-ucode/microcode_amd.bin",
- &microcode_pdev->dev);
- if (error) {
- printk(KERN_ERR "microcode: ucode data file %s load failed\n",
- name);
- return error;
- }
-
- buf_pos = (unsigned int *)firmware->data;
- buf = (void *)firmware->data;
- size = firmware->size;
-
- if (buf_pos[0] != UCODE_MAGIC) {
- printk(KERN_ERR "microcode: error! Wrong microcode patch file magic\n");
- return -EINVAL;
+ if (equiv_cpu_table) {
+ vfree(equiv_cpu_table);
+ equiv_cpu_table = NULL;
}
+}

- offset = install_equiv_cpu_table(buf, buf_pos[2], offset);
+static int generic_load_microcode(int cpu, void *data, size_t size,
+ int (*get_ucode_data)(void *, const void *, size_t))
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ u8 *ucode_ptr = data, *new_mc = NULL, *mc;
+ int new_rev = uci->cpu_sig.rev;
+ unsigned int leftover;
+ unsigned long offset;

+ offset = install_equiv_cpu_table(ucode_ptr, get_ucode_data);
if (!offset) {
printk(KERN_ERR "microcode: installing equivalent cpu table failed\n");
return -EINVAL;
}

- while ((offset =
- get_next_ucode_from_buffer_amd(&mc, buf, size, offset)) > 0) {
- error = get_matching_microcode_amd(mc, cpu);
- if (error < 0)
+ ucode_ptr += offset;
+ leftover = size - offset;
+
+ while (leftover) {
+ unsigned int mc_size;
+ struct microcode_header_amd *mc_header;
+
+ mc = get_next_ucode(ucode_ptr, leftover, get_ucode_data, &mc_size);
+ if (!mc)
break;
- /*
- * It's possible the data file has multiple matching ucode,
- * lets keep searching till the latest version
- */
- if (error == 1) {
- apply_microcode_amd(cpu);
- error = 0;
- }
- vfree(mc);
+
+ mc_header = (struct microcode_header_amd *)mc;
+ if (get_matching_microcode(cpu, mc, new_rev)) {
+ if (new_mc)
+ vfree(new_mc);
+ new_rev = mc_header->patch_id;
+ new_mc = mc;
+ } else
+ vfree(mc);
+
+ ucode_ptr += mc_size;
+ leftover -= mc_size;
}
- if (offset > 0) {
- vfree(mc);
- vfree(equiv_cpu_table);
- equiv_cpu_table = NULL;
+
+ if (new_mc) {
+ if (!leftover) {
+ if (uci->mc.mc_amd)
+ vfree(uci->mc.mc_amd);
+ uci->mc.mc_amd = (struct microcode_amd *)new_mc;
+ pr_debug("microcode: CPU%d found a matching microcode update with"
+ " version 0x%x (current=0x%x)\n",
+ cpu, uci->mc.mc_amd->hdr.patch_id, uci->cpu_sig.rev);
+ } else
+ vfree(new_mc);
+ }
+
+ free_equiv_cpu_table();
+
+ return (int)leftover;
+}
+
+static int get_ucode_fw(void *to, const void *from, size_t n)
+{
+ memcpy(to, from, n);
+ return 0;
+}
+
+static int request_microcode_fw(int cpu, struct device *device)
+{
+ const char *fw_name = "amd-ucode/microcode_amd.bin";
+ const struct firmware *firmware;
+ int ret;
+
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu != raw_smp_processor_id());
+
+ ret = request_firmware(&firmware, fw_name, device);
+ if (ret) {
+ printk(KERN_ERR "microcode: ucode data file %s load failed\n", fw_name);
+ return ret;
}
- if (offset < 0)
- error = offset;
+
+ ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size,
+ &get_ucode_fw);
+
release_firmware(firmware);

- return error;
+ return ret;
+}
+
+static int get_ucode_user(void *to, const void *from, size_t n)
+{
+ return copy_from_user(to, from, n);
+}
+
+static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+{
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu != raw_smp_processor_id());
+
+ return generic_load_microcode(cpu, (void*)buf, size, &get_ucode_user);
}

static void microcode_fini_cpu_amd(int cpu)
@@ -436,10 +421,8 @@ static void microcode_fini_cpu_amd(int cpu)
}

static struct microcode_ops microcode_amd_ops = {
- .get_next_ucode = get_next_ucode_amd,
- .get_matching_microcode = get_matching_microcode_amd,
- .microcode_sanity_check = NULL,
- .cpu_request_microcode = cpu_request_microcode_amd,
+ .request_microcode_user = request_microcode_user,
+ .request_microcode_fw = request_microcode_fw,
.collect_cpu_info = collect_cpu_info_amd,
.apply_microcode = apply_microcode_amd,
.microcode_fini_cpu = microcode_fini_cpu_amd,
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index c9b5320..f05a37e 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -70,8 +70,9 @@
* Fix sigmatch() macro to handle old CPUs with pf == 0.
* Thanks to Stuart Swales for pointing out this bug.
*/
-
-/* #define DEBUG */ /* pr_debug */
+#if 0
+#define DEBUG /* pr_debug */
+#endif
#include <linux/capability.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -155,15 +156,15 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
return 0;
}

-static inline int microcode_update_match(int cpu_num,
- struct microcode_header_intel *mc_header, int sig, int pf)
+static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf)
{
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+ return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1;
+}

- if (!sigmatch(sig, uci->cpu_sig.sig, pf, uci->cpu_sig.pf)
- || mc_header->rev <= uci->cpu_sig.rev)
- return 0;
- return 1;
+static inline int
+update_match_revision(struct microcode_header_intel *mc_header, int rev)
+{
+ return (mc_header->rev <= rev) ? 0 : 1;
}

static int microcode_sanity_check(void *mc)
@@ -248,51 +249,36 @@ static int microcode_sanity_check(void *mc)
/*
* return 0 - no update found
* return 1 - found update
- * return < 0 - error
*/
-static int get_matching_microcode(void *mc, int cpu)
+static int
+get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev)
{
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
struct microcode_header_intel *mc_header = mc;
struct extended_sigtable *ext_header;
unsigned long total_size = get_totalsize(mc_header);
int ext_sigcount, i;
struct extended_signature *ext_sig;
- void *new_mc;

- if (microcode_update_match(cpu, mc_header,
- mc_header->sig, mc_header->pf))
- goto find;
+ if (!update_match_revision(mc_header, rev))
+ return 0;
+
+ if (update_match_cpu(cpu_sig, mc_header->sig, mc_header->pf))
+ return 1;

+ /* Look for ext. headers: */
if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
return 0;

ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
ext_sigcount = ext_header->count;
ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+
for (i = 0; i < ext_sigcount; i++) {
- if (microcode_update_match(cpu, mc_header,
- ext_sig->sig, ext_sig->pf))
- goto find;
+ if (update_match_cpu(cpu_sig, ext_sig->sig, ext_sig->pf))
+ return 1;
ext_sig++;
}
return 0;
-find:
- pr_debug("microcode: CPU%d found a matching microcode update with"
- " version 0x%x (current=0x%x)\n",
- cpu, mc_header->rev, uci->cpu_sig.rev);
- new_mc = vmalloc(total_size);
- if (!new_mc) {
- printk(KERN_ERR "microcode: error! Can not allocate memory\n");
- return -ENOMEM;
- }
-
- /* free previous update file */
- vfree(uci->mc.mc_intel);
-
- memcpy(new_mc, mc, total_size);
- uci->mc.mc_intel = new_mc;
- return 1;
}

static void apply_microcode(int cpu)
@@ -300,7 +286,7 @@ static void apply_microcode(int cpu)
unsigned long flags;
unsigned int val[2];
int cpu_num = raw_smp_processor_id();
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;

/* We should bind the task to the CPU */
BUG_ON(cpu_num != cpu);
@@ -338,116 +324,107 @@ static void apply_microcode(int cpu)
uci->cpu_sig.rev = val[1];
}

-#ifdef CONFIG_MICROCODE_OLD_INTERFACE
-extern void __user *user_buffer; /* user area microcode data buffer */
-extern unsigned int user_buffer_size; /* it's size */
-
-static long get_next_ucode(void **mc, long offset)
+static int generic_load_microcode(int cpu, void *data, size_t size,
+ int (*get_ucode_data)(void *, const void *, size_t))
{
- struct microcode_header_intel mc_header;
- unsigned long total_size;
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ u8 *ucode_ptr = data, *new_mc = NULL, *mc;
+ int new_rev = uci->cpu_sig.rev;
+ unsigned int leftover = size;

- /* No more data */
- if (offset >= user_buffer_size)
- return 0;
- if (copy_from_user(&mc_header, user_buffer + offset, MC_HEADER_SIZE)) {
- printk(KERN_ERR "microcode: error! Can not read user data\n");
- return -EFAULT;
- }
- total_size = get_totalsize(&mc_header);
- if (offset + total_size > user_buffer_size) {
- printk(KERN_ERR "microcode: error! Bad total size in microcode "
- "data file\n");
- return -EINVAL;
- }
- *mc = vmalloc(total_size);
- if (!*mc)
- return -ENOMEM;
- if (copy_from_user(*mc, user_buffer + offset, total_size)) {
- printk(KERN_ERR "microcode: error! Can not read user data\n");
- vfree(*mc);
- return -EFAULT;
- }
- return offset + total_size;
-}
-#endif
+ while (leftover) {
+ struct microcode_header_intel mc_header;
+ unsigned int mc_size;

-static long get_next_ucode_from_buffer(void **mc, const u8 *buf,
- unsigned long size, long offset)
-{
- struct microcode_header_intel *mc_header;
- unsigned long total_size;
+ if (get_ucode_data(&mc_header, ucode_ptr, sizeof(mc_header)))
+ break;

- /* No more data */
- if (offset >= size)
- return 0;
- mc_header = (struct microcode_header_intel *)(buf + offset);
- total_size = get_totalsize(mc_header);
+ mc_size = get_totalsize(&mc_header);
+ if (!mc_size || mc_size > leftover) {
+ printk(KERN_ERR "microcode: error!"
+ "Bad data in microcode data file\n");
+ break;
+ }

- if (offset + total_size > size) {
- printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
- return -EINVAL;
+ mc = vmalloc(mc_size);
+ if (!mc)
+ break;
+
+ if (get_ucode_data(mc, ucode_ptr, mc_size) ||
+ microcode_sanity_check(mc) < 0) {
+ vfree(mc);
+ break;
+ }
+
+ if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) {
+ if (new_mc)
+ vfree(new_mc);
+ new_rev = mc_header.rev;
+ new_mc = mc;
+ } else
+ vfree(mc);
+
+ ucode_ptr += mc_size;
+ leftover -= mc_size;
}

- *mc = vmalloc(total_size);
- if (!*mc) {
- printk(KERN_ERR "microcode: error! Can not allocate memory\n");
- return -ENOMEM;
+ if (new_mc) {
+ if (!leftover) {
+ if (uci->mc.mc_intel)
+ vfree(uci->mc.mc_intel);
+ uci->mc.mc_intel = (struct microcode_intel *)new_mc;
+ pr_debug("microcode: CPU%d found a matching microcode update with"
+ " version 0x%x (current=0x%x)\n",
+ cpu, uci->mc.mc_intel->hdr.rev, uci->cpu_sig.rev);
+ } else
+ vfree(new_mc);
}
- memcpy(*mc, buf + offset, total_size);
- return offset + total_size;
+
+ return (int)leftover;
}

-/* fake device for request_firmware */
-extern struct platform_device *microcode_pdev;
+static int get_ucode_fw(void *to, const void *from, size_t n)
+{
+ memcpy(to, from, n);
+ return 0;
+}

-static int cpu_request_microcode(int cpu)
+static int request_microcode_fw(int cpu, struct device *device)
{
char name[30];
struct cpuinfo_x86 *c = &cpu_data(cpu);
const struct firmware *firmware;
- const u8 *buf;
- unsigned long size;
- long offset = 0;
- int error;
- void *mc;
+ int ret;

/* We should bind the task to the CPU */
BUG_ON(cpu != raw_smp_processor_id());
sprintf(name, "intel-ucode/%02x-%02x-%02x",
c->x86, c->x86_model, c->x86_mask);
- error = request_firmware(&firmware, name, &microcode_pdev->dev);
- if (error) {
+ ret = request_firmware(&firmware, name, device);
+ if (ret) {
pr_debug("microcode: data file %s load failed\n", name);
- return error;
+ return ret;
}
- buf = firmware->data;
- size = firmware->size;
- while ((offset = get_next_ucode_from_buffer(&mc, buf, size, offset))
- > 0) {
- error = microcode_sanity_check(mc);
- if (error)
- break;
- error = get_matching_microcode(mc, cpu);
- if (error < 0)
- break;
- /*
- * It's possible the data file has multiple matching ucode,
- * lets keep searching till the latest version
- */
- if (error == 1) {
- apply_microcode(cpu);
- error = 0;
- }
- vfree(mc);
- }
- if (offset > 0)
- vfree(mc);
- if (offset < 0)
- error = offset;
+
+ ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size,
+ &get_ucode_fw);
+
release_firmware(firmware);

- return error;
+ return ret;
+}
+
+static int get_ucode_user(void *to, const void *from, size_t n)
+{
+ return copy_from_user(to, from, n);
+}
+
+static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+{
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu != raw_smp_processor_id());
+
+ return generic_load_microcode(cpu, (void*)buf, size, &get_ucode_user);
}

static void microcode_fini_cpu(int cpu)
@@ -459,10 +436,8 @@ static void microcode_fini_cpu(int cpu)
}

static struct microcode_ops microcode_intel_ops = {
- .get_next_ucode = get_next_ucode,
- .get_matching_microcode = get_matching_microcode,
- .microcode_sanity_check = microcode_sanity_check,
- .cpu_request_microcode = cpu_request_microcode,
+ .request_microcode_user = request_microcode_user,
+ .request_microcode_fw = request_microcode_fw,
.collect_cpu_info = collect_cpu_info,
.apply_microcode = apply_microcode,
.microcode_fini_cpu = microcode_fini_cpu,
diff --git a/include/asm-x86/microcode.h b/include/asm-x86/microcode.h
index 7ceff48..e2887fa 100644
--- a/include/asm-x86/microcode.h
+++ b/include/asm-x86/microcode.h
@@ -5,17 +5,16 @@ extern int microcode_init(void *opaque, struct module *module);
extern void microcode_exit(void);

struct cpu_signature;
+struct device;

struct microcode_ops {
- long (*get_next_ucode)(void **mc, long offset);
- long (*microcode_get_next_ucode)(void **mc, long offset);
- int (*get_matching_microcode)(void *mc, int cpu);
- int (*microcode_sanity_check)(void *mc);
- int (*cpu_request_microcode)(int cpu);
- int (*collect_cpu_info)(int cpu_num, struct cpu_signature *csig);
- void (*apply_microcode)(int cpu);
- void (*microcode_fini_cpu)(int cpu);
- void (*clear_patch)(void *data);
+ int (*request_microcode_user) (int cpu, const void __user *buf, size_t size);
+ int (*request_microcode_fw) (int cpu, struct device *device);
+
+ void (*apply_microcode) (int cpu);
+
+ int (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
+ void (*microcode_fini_cpu) (int cpu);
};

struct microcode_header_intel {



\
 
 \ /
  Last update: 2008-09-14 11:19    [W:0.068 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site