Messages in this thread Patch in this message | | | From | "Rafael J. Wysocki" <> | Subject | [PATCH] sky2: Fix suspend/hibernation/shutdown regression with WOL enabled | Date | Sat, 9 Aug 2008 23:32:28 +0200 |
| |
sky2: Fix suspend/hibernation/shutdown regression with WOL enabled
On my test box with the Asus M3A32-MVP main board there is a regression from 2.6.26 related to suspend, hibernation and shutdown. Namely, if Wake-on-LAN is enabled with 'ethtool -s eth0 wol g', the box hangs solid during all of these operations, while executing either sky2_suspend(), or sky2_shutdown(). This patch fixes it for me.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> --- drivers/net/sky2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Index: linux-2.6/drivers/net/sky2.c =================================================================== --- linux-2.6.orig/drivers/net/sky2.c +++ linux-2.6/drivers/net/sky2.c @@ -665,7 +665,8 @@ static void sky2_phy_power_down(struct s GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 | GM_GPCR_AU_ALL_DIS); if (hw->chip_id != CHIP_ID_YUKON_EC) { - if (hw->chip_id == CHIP_ID_YUKON_EC_U) { + if (hw->chip_id == CHIP_ID_YUKON_EC_U + && hw->chip_rev != CHIP_REV_YU_EC_U_B0) { ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); /* enable Power Down */
| |