lkml.org 
[lkml]   [2008]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 6/10] drivers/mtd: Use DIV_ROUND_UP
From: Julia Lawall <julia@diku.dk>

The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /
(d)) but is perhaps more readable.

An extract of the semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

#include <linux/kernel.h>

@depends on haskernel@
expression n,d;
@@

(
- (n + d - 1) / d
+ DIV_ROUND_UP(n,d)
|
- (n + (d - 1)) / d
+ DIV_ROUND_UP(n,d)
)

@depends on haskernel@
expression n,d;
@@

- DIV_ROUND_UP((n),d)
+ DIV_ROUND_UP(n,d)

@depends on haskernel@
expression n,d;
@@

- DIV_ROUND_UP(n,(d))
+ DIV_ROUND_UP(n,d)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>

---
drivers/mtd/chips/cfi_cmdset_0001.c | 2 +-
drivers/mtd/chips/gen_probe.c | 2 +-
drivers/mtd/ssfdc.c | 3 +--
3 files changed, 3 insertions(+), 4 deletions(-)

diff -u -p a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -1640,7 +1640,7 @@ static int __xipram do_write_buffer(stru

/* Figure out the number of words to write */
word_gap = (-adr & (map_bankwidth(map)-1));
- words = (len - word_gap + map_bankwidth(map) - 1) / map_bankwidth(map);
+ words = DIV_ROUND_UP(len - word_gap, map_bankwidth(map));
if (!word_gap) {
words--;
} else {
diff -u -p a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -111,7 +111,7 @@ static struct cfi_private *genprobe_iden
max_chips = 1;
}

- mapsize = sizeof(long) * ( (max_chips + BITS_PER_LONG-1) / BITS_PER_LONG );
+ mapsize = sizeof(long) * DIV_ROUND_UP(max_chips, BITS_PER_LONG);
chip_map = kzalloc(mapsize, GFP_KERNEL);
if (!chip_map) {
printk(KERN_WARNING "%s: kmalloc failed for CFI chip map\n", map->name);
diff -u -p a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c
--- a/drivers/mtd/ssfdc.c
+++ b/drivers/mtd/ssfdc.c
@@ -321,8 +321,7 @@ static void ssfdcr_add_mtd(struct mtd_bl
DEBUG(MTD_DEBUG_LEVEL1,
"SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
ssfdc->cis_block, ssfdc->erase_size, ssfdc->map_len,
- (ssfdc->map_len + MAX_PHYS_BLK_PER_ZONE - 1) /
- MAX_PHYS_BLK_PER_ZONE);
+ DIV_ROUND_UP(ssfdc->map_len, MAX_PHYS_BLK_PER_ZONE));

/* Set geometry */
ssfdc->heads = 16;

\
 
 \ /
  Last update: 2008-08-02 17:17    [W:0.038 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site