lkml.org 
[lkml]   [2008]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] Video/Framebuffer: add fuctional power management support to Blackfin BF54x LQ043 framebuffer driver
Date
From: Michael Hennerich <michael.hennerich@analog.com>

Fix bug: does nor properply resume after suspend mem
Fix for PM_SUSPEND_MEM: Save and restore peripheral base and DMA registers

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
drivers/video/bf54x-lq043fb.c | 15 ++++++++++++---
1 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 940467a..6d5aa80 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -733,7 +733,6 @@ static int bfin_bf54x_remove(struct platform_device *pdev)
static int bfin_bf54x_suspend(struct platform_device *pdev, pm_message_t state)
{
struct fb_info *fbinfo = platform_get_drvdata(pdev);
- struct bfin_bf54xfb_info *info = fbinfo->par;

bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() & ~EPPI_EN);
disable_dma(CH_EPPI0);
@@ -747,8 +746,18 @@ static int bfin_bf54x_resume(struct platform_device *pdev)
struct fb_info *fbinfo = platform_get_drvdata(pdev);
struct bfin_bf54xfb_info *info = fbinfo->par;

- enable_dma(CH_EPPI0);
- bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
+ if (info->lq043_open_cnt) {
+
+ bfin_write_EPPI0_CONTROL(0);
+ SSYNC();
+
+ config_dma(info);
+ config_ppi(info);
+
+ /* start dma */
+ enable_dma(CH_EPPI0);
+ bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
+ }

return 0;
}
--
1.5.6

\
 
 \ /
  Last update: 2008-08-15 11:09    [W:0.035 / U:1.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site