Messages in this thread | | | Date | 29 Jul 2008 22:58:49 -0000 | From | "w.landgraf" <> | Subject | correction: kernel problem report |
| |
In my kernel bug / problem /crash-during-reboot report occured the mistake that, instead of the corresponding 2.6.27-rc1 dmesg, I included that dmesg of 2.6.26 what Im continuing to use. Here the corresponding 2.6.27-rc1 dmesg:
Werner Landgraf werner@copaya.yi.org ============================================= Linux version 2.6.27-rc1-i486-1sys (root@werner) (gcc version 4.2.4) #1 SMP Tue Jul 29 12:13:34 GFT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable) BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000240000000 (usable) last_pfn = 0xbfee0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 38000000 @ 7000-c000 DMI 2.4 present. ACPI: RSDP 000F6FD0, 0024 (r2 Nvidia) ACPI: XSDT BFEE30C0, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: FACP BFEEB840, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: DSDT BFEE3240, 8581 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000) ACPI: FACS BFEE0000, 0040 ACPI: MCFG BFEEBA40, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: APIC BFEEB980, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) 2174MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (8 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000afbea0] TEXT DATA BSS ==> [0000100000 - 0000afbea0] #4 [0000afc000 - 0000b00000] INIT_PG_TABLE ==> [0000afc000 - 0000b00000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00f5440] 000f5440 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x000bfee0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bfee0 On node 0 totalpages: 786047 free_area_init_node: node 0, pgdat c097c200, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 552418 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x1008 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) Processor #1 Bus #0 is PCI Bus #1 is PCI Bus #2 is PCI Bus #3 is PCI Bus #4 is PCI Bus #5 is ISA I/O APIC #2 Version 17 at 0xFEC00000. Int: type 0, pol 3, trig 3, bus 00, IRQ 04, APIC ID 2, APIC INT 0a Int: type 0, pol 3, trig 3, bus 00, IRQ 08, APIC ID 2, APIC INT 0b Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 05 Int: type 0, pol 3, trig 3, bus 01, IRQ 18, APIC ID 2, APIC INT 0a Int: type 0, pol 3, trig 3, bus 00, IRQ 1c, APIC ID 2, APIC INT 0b Int: type 0, pol 3, trig 3, bus 00, IRQ 15, APIC ID 2, APIC INT 05 Int: type 0, pol 3, trig 3, bus 02, IRQ 00, APIC ID 2, APIC INT 0a Int: type 0, pol 3, trig 3, bus 01, IRQ 20, APIC ID 2, APIC INT 0b Int: type 0, pol 3, trig 3, bus 03, IRQ 00, APIC ID 2, APIC INT 05 Int: type 0, pol 3, trig 3, bus 00, IRQ 20, APIC ID 2, APIC INT 0a Int: type 0, pol 3, trig 3, bus 00, IRQ 21, APIC ID 2, APIC INT 0b Int: type 3, pol 0, trig 0, bus 05, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 05, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 05, IRQ 00, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 05, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 05, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 05, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 05, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 1, trig 1, bus 05, IRQ 08, APIC ID 2, APIC INT 08 Int: type 0, pol 0, trig 0, bus 05, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 05, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 05, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 05, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 05, IRQ 0f, APIC ID 2, APIC INT 0f Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00 Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01 Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at c0000000 (gap: bff00000:30100000) PERCPU: Allocating 40368 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779905 Kernel command line: BOOT_IMAGE=2627rc1 ro root=802 4 root=/dev/sda2 devfs=nomount noapic nolapic acpi=ht Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Detected 2511.394 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3107532k/3144576k available (6677k kernel code, 35780k reserved, 2411k data, 580k init, 2227072k highmem) virtual kernel memory layout: fixmap : 0xffe17000 - 0xfffff000 (1952 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc09eb000 - 0xc0a7c000 ( 580 kB) .data : 0xc078549b - 0xc09e0160 (2411 kB) .text : 0xc0100000 - 0xc078549b (6677 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. <6>5022.78 BogoMIPS (lpj=10045576) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Failure registering Root Plug module with the kernel Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) -> Core 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using C1E aware idle routine Checking 'hlt' instruction... OK. BIOS bug, local APIC #0 not detected!... ... forcing use of dummy APIC emulation.(tell your hw vendor) SMP disabled Brought up 1 CPUs Total of 1 processors activated (5022.78 BogoMIPS). net_namespace: 792 bytes Booting paravirtualized kernel on bare hardware xor: automatically using best checksumming function: pIII_sse pIII_sse : 7578.000 MB/sec xor: using function: pIII_sse (7578.000 MB/sec) NET: Registered protocol family 16 EISA bus registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fc6b0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc6e0, dseg 0xf0000 PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: supports D1 pci 0000:00:02.0: supports D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: supports D1 pci 0000:00:02.1: supports D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:05.0: PME# supported from D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:07.0: supports D1 pci 0000:00:07.0: supports D2 pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:01:06.0: supports D1 pci 0000:01:06.0: supports D2 pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot pci 0000:01:06.0: PME# disabled pci 0000:00:04.0: transparent bridge pci 0000:02:00.0: supports D1 pci 0000:02:00.0: supports D2 pci 0000:02:00.1: supports D1 pci 0000:02:00.1: supports D2 Pre-1.1 PCIe device detected, disable ASPM for 0000:00:09.0. It can be enabled forcedly with 'pcie_aspm=force' pci 0000:03:00.0: PME# supported from D3hot pci 0000:03:00.0: PME# disabled Pre-1.1 PCIe device detected, disable ASPM for 0000:00:0b.0. It can be enabled forcedly with 'pcie_aspm=force' pci 0000:00:00.0: default IRQ router [10de/03ea] NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread F7830000 could not acquire Mutex [1] [20080609] system 00:07: iomem range 0x0-0x9ffff could not be reserved system 00:07: iomem range 0xfffffffffffe0000-0xffffffffffffffff has been reserved system 00:07: iomem range 0xfffffffffec00000-0xfffffffffec0ffff has been reserved system 00:07: iomem range 0xfffffffffee00000-0xfffffffffeefffff has been reserved system 00:07: iomem range 0xfffffffffefff000-0xfffffffffefff3ff has been reserved system 00:07: iomem range 0x100000-0xffffff could not be reserved system 00:08: iomem range 0xf0000-0xf3fff could not be reserved system 00:08: iomem range 0xf4000-0xf7fff could not be reserved system 00:08: iomem range 0xf8000-0xfffff could not be reserved system 00:08: iomem range 0xd2800-0xd3fff has been reserved pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 pci 0000:00:04.0: IO window: 0xb000-0xbfff pci 0000:00:04.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:00:04.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 pci 0000:00:09.0: IO window: 0xa000-0xafff pci 0000:00:09.0: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:09.0: PREFETCH window: 0x000000e0000000-0x000000efffffff pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0b.0: IO window: 0x8000-0x9fff pci 0000:00:0b.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:0b.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0c.0: IO window: 0x7000-0x7fff pci 0000:00:0c.0: MEM window: 0xfda00000-0xfdafffff pci 0000:00:0c.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 audit: initializing netlink socket (disabled) type=2000 audit(1217336289.075:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NTFS driver 2.1.29 [Flags: R/W]. JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem GFS2 (built Jul 29 2008 11:36:47) installed msgmni has been set to 1721 SELinux: Registering netfilter hooks async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:04.0: Enabling HT MSI Mapping pci 0000:00:05.0: Enabling HT MSI Mapping pci 0000:00:07.0: Enabling HT MSI Mapping pci 0000:00:08.0: Enabling HT MSI Mapping pci 0000:00:08.1: Enabling HT MSI Mapping pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:02:00.0: Boot video device pcieport-driver 0000:00:09.0: setting latency timer to 64 pcieport-driver 0000:00:09.0: found MSI capability pci_express 0000:00:09.0:pcie00: allocate port service pci_express 0000:00:09.0:pcie03: allocate port service pcieport-driver 0000:00:0b.0: setting latency timer to 64 pcieport-driver 0000:00:0b.0: found MSI capability pci_express 0000:00:0b.0:pcie00: allocate port service pci_express 0000:00:0b.0:pcie03: allocate port service pcieport-driver 0000:00:0c.0: setting latency timer to 64 pcieport-driver 0000:00:0c.0: found MSI capability pci_express 0000:00:0c.0:pcie00: allocate port service pci_express 0000:00:0c.0:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xe0000000, mapped to 0xf8d00000, using 3072k, total 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: protected mode interface info at c000:a2da vesafb: pmi: set display start = c00ca362, set palette = c00ca41e vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.20) input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver amd74xx 0000:00:06.0: UDMA133 controller amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2) amd74xx 0000:00:06.0: IDE port disabled amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround. amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007 Probing IDE interface ide0... hdb: HL-DT-ST DVDRAM GSA-H44N, ATAPI CD/DVD-ROM drive hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/66 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x03) pci 0000:03:00.1: enabling device (0000 -> 0001) pci 0000:03:00.1: can't find IRQ for PCI INT B; please try using pci=biosirq jmicron 0000:03:00.1: bad irq (0): will probe later pci 0000:03:00.1: setting latency timer to 64 ide1: BM-DMA at 0x8c00-0x8c07 ide2: BM-DMA at 0x8c08-0x8c0f Probing IDE interface ide1... Probing IDE interface ide2... ide1: disabled, no IRQ ide1: failed to initialize IDE interface ide2: disabled, no IRQ ide2: failed to initialize IDE interface jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x03) JMicron IDE 0000:03:00.1: BAR 0: can't reserve I/O region [0x9c00-0x9c07] jmicron 0000:03:00.1: can't reserve resources JMicron IDE: probe of 0000:03:00.1 failed with error -16 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 1.00 Loading iSCSI transport class v2.0-870. Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Adaptec aacraid driver 1.1-5[2456]-ms aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded scsi: <fdomain> Detection failed (no card) sym53c416.c: Version 1.0.0-ac qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k6 iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver Emulex LightPulse Fibre Channel SCSI driver 8.2.7 Copyright(c) 2004-2008 Emulex. All rights reserved. Failed initialization of WD-7000 SCSI card! DC390: clustering now enabled by default. If you get problems load with "disable_clustering=1" and report to maintainers megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008 GDT-HA: Storage RAID Controller Driver. Version: 3.05 3ware Storage Controller device driver for Linux v1.26.02.002. 3ware 9000 Storage Controller device driver for Linux v2.26.02.011. nsp32: loading... ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007) RocketRAID 3xxx/4xxx Controller driver v1.3 (071203) st: Version 20080504, fixed bufsize 32768, s/g segs 256 Driver 'st' needs updating - please use bus_type methods Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:03:00.0: version 3.0 ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part ahci 0000:03:00.0: setting latency timer to 64 scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 5 ata2: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 5 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) sata_nv 0000:00:08.0: version 3.5 sata_nv 0000:00:08.0: setting latency timer to 64 scsi4 : sata_nv scsi5 : sata_nv ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 10 ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 10 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01104, max UDMA7 ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 ata4: SATA link down (SStatus 0 SControl 300) scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 sd 4:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 4:0:0:0: [sda] Attached SCSI disk sata_nv 0000:00:08.1: setting latency timer to 64 scsi6 : sata_nv scsi7 : sata_nv ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 11 ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 11 ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-H66N, CB00, max UDMA/100 ata5.00: configured for UDMA/100 ata6: SATA link down (SStatus 0 SControl 300) scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H66N CB00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray sr 6:0:0:0: Attached scsi CD-ROM sr0 pata_acpi 0000:03:00.1: BAR 0: can't reserve I/O region [0x9c00-0x9c07] pata_acpi 0000:03:00.1: failed to request/iomap BARs for port 0 (errno=-16) pata_acpi 0000:03:00.1: BAR 2: can't reserve I/O region [0x9400-0x9407] pata_acpi 0000:03:00.1: failed to request/iomap BARs for port 1 (errno=-16) pata_acpi 0000:03:00.1: no available native port I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 Fusion MPT FC Host driver 3.04.07 Fusion MPT SAS Host driver 3.04.07 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8] ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 5, io mem 0xfe02e000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-rc1-i486-1sys ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 116x: driver isp116x-hcd, 03 Nov 2005 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 11, io mem 0xfe02f000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 1-5: new high speed USB device using ehci_hcd and address 3 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-rc1-i486-1sys ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 USB Universal Host Controller Interface driver v3.0 sl811: driver sl811-hcd, 19 May 2005 Initializing USB Mass Storage driver... usb 1-5: configuration #1 chosen from 1 choice usb 1-5: New USB device found, idVendor=0bda, idProduct=8187 usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-5: Product: RTL8187_Wireless usb 1-5: Manufacturer: Manufacturer_Realtek_RTL8187_ usb 1-5: SerialNumber: 0015AF2347F2 usb 2-2: new full speed USB device using ohci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice usb 2-2: New USB device found, idVendor=03f0, idProduct=0c17 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: hp LaserJet 1010 usb 2-2: Manufacturer: Hewlett-Packard usb 2-2: SerialNumber: 00CNFD758052 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int32x1 934 MB/s raid6: int32x2 1000 MB/s raid6: int32x4 957 MB/s raid6: int32x8 682 MB/s raid6: mmxx1 2059 MB/s raid6: mmxx2 3742 MB/s raid6: sse1x1 2058 MB/s raid6: sse1x2 3382 MB/s raid6: sse2x1 3394 MB/s raid6: sse2x2 4751 MB/s raid6: using algorithm sse2x2 (4751 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com EDAC MC: Ver: 2.1.0 Jul 29 2008 EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 7 Cannot allocate resource for EISA slot 8 EISA: Detected 0 cards. usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Using IPI No-Shortcut mode registered taskstats version 1 register_blkdev: cannot get major 3 for hd input: AT Translated Set 2 keyboard as /class/input/input1 md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 580k freed ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800016acd4f] fuse init (API version 7.9) EXT3 FS on sda2, internal journal parport_pc 00:0d: reported by Plug and Play BIOS parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready PPP generic driver version 2.4.2 NET: Registered protocol family 24 Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 pci 0000:02:00.0: setting latency timer to 64 [drm] Initialized radeon 1.29.0 20080528 on minor 0 kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode.
| |