lkml.org 
[lkml]   [2008]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] isd200: use ATA_* defines instead of *_STAT and *_ERR ones
Date
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/usb/storage/isd200.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)

Index: b/drivers/usb/storage/isd200.c
===================================================================
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -373,19 +373,19 @@ static void isd200_build_sense(struct us
buf->Flags = UNIT_ATTENTION;
buf->AdditionalSenseCode = 0;
buf->AdditionalSenseCodeQualifier = 0;
- } else if(error & MCR_ERR) {
+ } else if (error & ATA_MCR) {
buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
buf->AdditionalSenseLength = 0xb;
buf->Flags = UNIT_ATTENTION;
buf->AdditionalSenseCode = 0;
buf->AdditionalSenseCodeQualifier = 0;
- } else if(error & TRK0_ERR) {
+ } else if (error & ATA_TRK0NF) {
buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
buf->AdditionalSenseLength = 0xb;
buf->Flags = NOT_READY;
buf->AdditionalSenseCode = 0;
buf->AdditionalSenseCodeQualifier = 0;
- } else if(error & ECC_ERR) {
+ } else if (error & ATA_UNC) {
buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
buf->AdditionalSenseLength = 0xb;
buf->Flags = DATA_PROTECT;
@@ -898,22 +898,22 @@ static int isd200_try_enum(struct us_dat
break;

if (!detect) {
- if (regs[ATA_REG_STATUS_OFFSET] & BUSY_STAT) {
+ if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) {
US_DEBUGP(" %s status is still BSY, try again...\n",mstr);
} else {
US_DEBUGP(" %s status !BSY, continue with next operation\n",mstr);
break;
}
}
- /* check for BUSY_STAT and */
- /* WRERR_STAT (workaround ATA Zip drive) and */
- /* ERR_STAT (workaround for Archos CD-ROM) */
+ /* check for ATA_BUSY and */
+ /* ATA_DF (workaround ATA Zip drive) and */
+ /* ATA_ERR (workaround for Archos CD-ROM) */
else if (regs[ATA_REG_STATUS_OFFSET] &
- (BUSY_STAT | WRERR_STAT | ERR_STAT )) {
+ (ATA_BUSY | ATA_DF | ATA_ERR)) {
US_DEBUGP(" Status indicates it is not ready, try again...\n");
}
/* check for DRDY, ATA devices set DRDY after SRST */
- else if (regs[ATA_REG_STATUS_OFFSET] & READY_STAT) {
+ else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) {
US_DEBUGP(" Identified ATA device\n");
info->DeviceFlags |= DF_ATA_DEVICE;
info->DeviceHead = master_slave;

\
 
 \ /
  Last update: 2008-07-24 21:31    [W:0.022 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site