lkml.org 
[lkml]   [2008]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch] MMC: wbsd: initialize tasklets before requesting interrupt
MMC: wbsd: initialize tasklets before requesting interrupt

With CONFIG_DEBUG_SHIRQ set we will get an interrupt as soon as we
allocate one. Tasklets may be scheduled in the interrupt handler but
they will be initialized after the handler returns, causing a BUG()
in kernel/softirq.c when they run.

Should fix this Fedora bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=449817

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>

--- linux-2.6.25.noarch.orig/drivers/mmc/host/wbsd.c
+++ linux-2.6.25.noarch/drivers/mmc/host/wbsd.c
@@ -1457,17 +1457,7 @@ static int __devinit wbsd_request_irq(st
int ret;

/*
- * Allocate interrupt.
- */
-
- ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host);
- if (ret)
- return ret;
-
- host->irq = irq;
-
- /*
- * Set up tasklets.
+ * Set up tasklets. Must be done before requesting interrupt.
*/
tasklet_init(&host->card_tasklet, wbsd_tasklet_card,
(unsigned long)host);
@@ -1480,6 +1470,15 @@ static int __devinit wbsd_request_irq(st
tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish,
(unsigned long)host);

+ /*
+ * Allocate interrupt.
+ */
+ ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host);
+ if (ret)
+ return ret;
+
+ host->irq = irq;
+
return 0;
}


\
 
 \ /
  Last update: 2008-06-07 16:33    [W:0.040 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site