lkml.org 
[lkml]   [2008]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 03/70] drivers/serial/: remove CVS keywords
    Date
    From: Adrian Bunk <bunk@kernel.org>
    This patch removes CVS keywords that weren't updated for a long time in
    comments, printk's and MODULE_DESCRIPTION's (no printk's or
    MODULE_DESCRIPTION's are completely removed).

    While doing this I also found and fixed a missing \n in a printk
    in m32r_sio.c

    Signed-off-by: Adrian Bunk <bunk@kernel.org>
    ---

    drivers/serial/21285.c | 6 ++----
    drivers/serial/8250.c | 6 ++----
    drivers/serial/8250.h | 2 --
    drivers/serial/8250_pci.c | 2 --
    drivers/serial/8250_pnp.c | 2 --
    drivers/serial/Kconfig | 2 --
    drivers/serial/Makefile | 2 --
    drivers/serial/amba-pl010.c | 6 ++----
    drivers/serial/amba-pl011.c | 2 --
    drivers/serial/clps711x.c | 7 ++-----
    drivers/serial/cpm_uart/cpm_uart_core.c | 4 ++--
    drivers/serial/m32r_sio.c | 4 ++--
    drivers/serial/mpsc.c | 4 ++--
    drivers/serial/pnx8xxx_uart.c | 2 +-
    drivers/serial/sa1100.c | 7 ++-----
    drivers/serial/sunsu.c | 2 +-
    16 files changed, 18 insertions(+), 42 deletions(-)


    diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
    index 0276471..1b6b83c 100644
    --- a/drivers/serial/21285.c
    +++ b/drivers/serial/21285.c
    @@ -4,8 +4,6 @@
    * Driver for the serial port on the 21285 StrongArm-110 core logic chip.
    *
    * Based on drivers/char/serial.c
    - *
    - * $Id: 21285.c,v 1.37 2002/07/28 10:03:27 rmk Exp $
    */
    #include <linux/module.h>
    #include <linux/tty.h>
    @@ -494,7 +492,7 @@ static int __init serial21285_init(void)
    {
    int ret;

    - printk(KERN_INFO "Serial: 21285 driver $Revision: 1.37 $\n");
    + printk(KERN_INFO "Serial: 21285 driver\n");

    serial21285_setup_ports();

    @@ -515,5 +513,5 @@ module_init(serial21285_init);
    module_exit(serial21285_exit);

    MODULE_LICENSE("GPL");
    -MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver $Revision: 1.37 $");
    +MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver");
    MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR);
    diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
    index 1bc00b7..b040912 100644
    --- a/drivers/serial/8250.c
    +++ b/drivers/serial/8250.c
    @@ -12,8 +12,6 @@
    * the Free Software Foundation; either version 2 of the License, or
    * (at your option) any later version.
    *
    - * $Id: 8250.c,v 1.90 2002/07/28 10:03:27 rmk Exp $
    - *
    * A note about mapbase / membase
    *
    * mapbase is the physical address of the IO port.
    @@ -2931,7 +2929,7 @@ static int __init serial8250_init(void)
    if (nr_uarts > UART_NR)
    nr_uarts = UART_NR;

    - printk(KERN_INFO "Serial: 8250/16550 driver $Revision: 1.90 $ "
    + printk(KERN_INFO "Serial: 8250/16550 driver"
    "%d ports, IRQ sharing %sabled\n", nr_uarts,
    share_irqs ? "en" : "dis");

    @@ -2992,7 +2990,7 @@ EXPORT_SYMBOL(serial8250_suspend_port);
    EXPORT_SYMBOL(serial8250_resume_port);

    MODULE_LICENSE("GPL");
    -MODULE_DESCRIPTION("Generic 8250/16x50 serial driver $Revision: 1.90 $");
    +MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");

    module_param(share_irqs, uint, 0644);
    MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
    diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
    index 91bd28f..78c0016 100644
    --- a/drivers/serial/8250.h
    +++ b/drivers/serial/8250.h
    @@ -11,8 +11,6 @@
    * it under the terms of the GNU General Public License as published by
    * the Free Software Foundation; either version 2 of the License, or
    * (at your option) any later version.
    - *
    - * $Id: 8250.h,v 1.8 2002/07/21 21:32:30 rmk Exp $
    */

    #include <linux/serial_8250.h>
    diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
    index 788c355..1b36087 100644
    --- a/drivers/serial/8250_pci.c
    +++ b/drivers/serial/8250_pci.c
    @@ -10,8 +10,6 @@
    * This program is free software; you can redistribute it and/or modify
    * it under the terms of the GNU General Public License as published by
    * the Free Software Foundation; either version 2 of the License.
    - *
    - * $Id: 8250_pci.c,v 1.28 2002/11/02 11:14:18 rmk Exp $
    */
    #include <linux/module.h>
    #include <linux/init.h>
    diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
    index 97c68d0..ec522b3 100644
    --- a/drivers/serial/8250_pnp.c
    +++ b/drivers/serial/8250_pnp.c
    @@ -12,8 +12,6 @@
    * This program is free software; you can redistribute it and/or modify
    * it under the terms of the GNU General Public License as published by
    * the Free Software Foundation; either version 2 of the License.
    - *
    - * $Id: 8250_pnp.c,v 1.10 2002/07/21 21:32:30 rmk Exp $
    */
    #include <linux/module.h>
    #include <linux/init.h>
    diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
    index 9bc4276..76b1c62 100644
    --- a/drivers/serial/Kconfig
    +++ b/drivers/serial/Kconfig
    @@ -1,8 +1,6 @@
    #
    # Serial device configuration
    #
    -# $Id: Kconfig,v 1.11 2004/03/11 18:08:04 lethal Exp $
    -#

    menu "Serial drivers"
    depends on HAS_IOMEM
    diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
    index 0d9c09b..34e89a4 100644
    --- a/drivers/serial/Makefile
    +++ b/drivers/serial/Makefile
    @@ -1,8 +1,6 @@
    #
    # Makefile for the kernel serial device drivers.
    #
    -# $Id: Makefile,v 1.8 2002/07/21 21:32:30 rmk Exp $
    -#

    obj-$(CONFIG_SERIAL_CORE) += serial_core.o
    obj-$(CONFIG_SERIAL_21285) += 21285.o
    diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
    index e88da72..0df6e40 100644
    --- a/drivers/serial/amba-pl010.c
    +++ b/drivers/serial/amba-pl010.c
    @@ -22,8 +22,6 @@
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    *
    - * $Id: amba.c,v 1.41 2002/07/28 10:03:27 rmk Exp $
    - *
    * This is a generic driver for ARM AMBA-type serial ports. They
    * have a lot of 16550-like features, but are not register compatible.
    * Note that although they do have CTS, DCD and DSR inputs, they do
    @@ -791,7 +789,7 @@ static int __init pl010_init(void)
    {
    int ret;

    - printk(KERN_INFO "Serial: AMBA driver $Revision: 1.41 $\n");
    + printk(KERN_INFO "Serial: AMBA driver\n");

    ret = uart_register_driver(&amba_reg);
    if (ret == 0) {
    @@ -812,5 +810,5 @@ module_init(pl010_init);
    module_exit(pl010_exit);

    MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
    -MODULE_DESCRIPTION("ARM AMBA serial port driver $Revision: 1.41 $");
    +MODULE_DESCRIPTION("ARM AMBA serial port driver");
    MODULE_LICENSE("GPL");
    diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
    index 08adc1d..8b5aa0b 100644
    --- a/drivers/serial/amba-pl011.c
    +++ b/drivers/serial/amba-pl011.c
    @@ -22,8 +22,6 @@
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    *
    - * $Id: amba.c,v 1.41 2002/07/28 10:03:27 rmk Exp $
    - *
    * This is a generic driver for ARM AMBA-type serial ports. They
    * have a lot of 16550-like features, but are not register compatible.
    * Note that although they do have CTS, DCD and DSR inputs, they do
    diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
    index 2382718..c6495f7 100644
    --- a/drivers/serial/clps711x.c
    +++ b/drivers/serial/clps711x.c
    @@ -21,9 +21,6 @@
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    - *
    - * $Id: clps711x.c,v 1.42 2002/07/28 10:03:28 rmk Exp $
    - *
    */

    #if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
    @@ -551,7 +548,7 @@ static int __init clps711xuart_init(void)
    {
    int ret, i;

    - printk(KERN_INFO "Serial: CLPS711x driver $Revision: 1.42 $\n");
    + printk(KERN_INFO "Serial: CLPS711x driver\n");

    ret = uart_register_driver(&clps711x_reg);
    if (ret)
    @@ -577,6 +574,6 @@ module_init(clps711xuart_init);
    module_exit(clps711xuart_exit);

    MODULE_AUTHOR("Deep Blue Solutions Ltd");
    -MODULE_DESCRIPTION("CLPS-711x generic serial driver $Revision: 1.42 $");
    +MODULE_DESCRIPTION("CLPS-711x generic serial driver");
    MODULE_LICENSE("GPL");
    MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR);
    diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
    index a19dc7e..74935a5 100644
    --- a/drivers/serial/cpm_uart/cpm_uart_core.c
    +++ b/drivers/serial/cpm_uart/cpm_uart_core.c
    @@ -1530,7 +1530,7 @@ static int cpm_uart_init(void) {
    int ret;
    int i;
    struct device *dev;
    - printk(KERN_INFO "Serial: CPM driver $Revision: 0.02 $\n");
    + printk(KERN_INFO "Serial: CPM driver\n");

    /* lookup the bus for uart devices */
    dev = bus_find_device(&platform_bus_type, NULL, 0, match_is_uart);
    @@ -1591,6 +1591,6 @@ module_init(cpm_uart_init);
    module_exit(cpm_uart_exit);

    MODULE_AUTHOR("Kumar Gala/Antoniou Pantelis");
    -MODULE_DESCRIPTION("CPM SCC/SMC port driver $Revision: 0.01 $");
    +MODULE_DESCRIPTION("CPM SCC/SMC port driver");
    MODULE_LICENSE("GPL");
    MODULE_ALIAS_CHARDEV(SERIAL_CPM_MAJOR, SERIAL_CPM_MINOR);
    diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
    index c2bb11c..60a95bb 100644
    --- a/drivers/serial/m32r_sio.c
    +++ b/drivers/serial/m32r_sio.c
    @@ -1160,7 +1160,7 @@ static int __init m32r_sio_init(void)
    {
    int ret, i;

    - printk(KERN_INFO "Serial: M32R SIO driver $Revision: 1.11 $ ");
    + printk(KERN_INFO "Serial: M32R SIO driver\n");

    for (i = 0; i < NR_IRQS; i++)
    spin_lock_init(&irq_lists[i].lock);
    @@ -1189,4 +1189,4 @@ EXPORT_SYMBOL(m32r_sio_suspend_port);
    EXPORT_SYMBOL(m32r_sio_resume_port);

    MODULE_LICENSE("GPL");
    -MODULE_DESCRIPTION("Generic M32R SIO serial driver $Revision: 1.11 $");
    +MODULE_DESCRIPTION("Generic M32R SIO serial driver");
    diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
    index e8819c4..da596e7 100644
    --- a/drivers/serial/mpsc.c
    +++ b/drivers/serial/mpsc.c
    @@ -1972,7 +1972,7 @@ static int __init mpsc_drv_init(void)
    {
    int rc;

    - printk(KERN_INFO "Serial: MPSC driver $Revision: 1.00 $\n");
    + printk(KERN_INFO "Serial: MPSC driver\n");

    memset(mpsc_ports, 0, sizeof(mpsc_ports));
    memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
    @@ -2004,7 +2004,7 @@ module_init(mpsc_drv_init);
    module_exit(mpsc_drv_exit);

    MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
    -MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver $Revision: 1.00 $");
    +MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver");
    MODULE_VERSION(MPSC_VERSION);
    MODULE_LICENSE("GPL");
    MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR);
    diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
    index d0e5a79..1ba5917 100644
    --- a/drivers/serial/pnx8xxx_uart.c
    +++ b/drivers/serial/pnx8xxx_uart.c
    @@ -824,7 +824,7 @@ static int __init pnx8xxx_serial_init(void)
    {
    int ret;

    - printk(KERN_INFO "Serial: PNX8XXX driver $Revision: 1.2 $\n");
    + printk(KERN_INFO "Serial: PNX8XXX driver\n");

    pnx8xxx_init_ports();

    diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
    index 62b3858..f3cf7fe 100644
    --- a/drivers/serial/sa1100.c
    +++ b/drivers/serial/sa1100.c
    @@ -20,9 +20,6 @@
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    - *
    - * $Id: sa1100.c,v 1.50 2002/07/29 14:41:04 rmk Exp $
    - *
    */

    #if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
    @@ -892,7 +889,7 @@ static int __init sa1100_serial_init(void)
    {
    int ret;

    - printk(KERN_INFO "Serial: SA11x0 driver $Revision: 1.50 $\n");
    + printk(KERN_INFO "Serial: SA11x0 driver\n");

    sa1100_init_ports();

    @@ -915,7 +912,7 @@ module_init(sa1100_serial_init);
    module_exit(sa1100_serial_exit);

    MODULE_AUTHOR("Deep Blue Solutions Ltd");
    -MODULE_DESCRIPTION("SA1100 generic serial port driver $Revision: 1.50 $");
    +MODULE_DESCRIPTION("SA1100 generic serial port driver");
    MODULE_LICENSE("GPL");
    MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_SA1100_MAJOR);
    MODULE_ALIAS("platform:sa11x0-uart");
    diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
    index 03806a9..1074e73 100644
    --- a/drivers/serial/sunsu.c
    +++ b/drivers/serial/sunsu.c
    @@ -1,4 +1,4 @@
    -/* $Id: su.c,v 1.55 2002/01/08 16:00:16 davem Exp $
    +/*
    * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI
    *
    * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)


    \
     
     \ /
      Last update: 2008-06-20 22:21    [W:4.095 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site