lkml.org 
[lkml]   [2008]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch] video: build fix for drivers/media/video/mt9v022.c

x86.git testing found the following build bug on latest -git:

CC [M] drivers/media/video/mt9v022.o
drivers/media/video/mt9v022.c: In function 'bus_switch_request':
drivers/media/video/mt9v022.c:199: error: implicit declaration of function 'gpio_is_valid'
drivers/media/video/mt9v022.c:201: error: implicit declaration of function 'gpio_request'
drivers/media/video/mt9v022.c:207: error: implicit declaration of function 'gpio_direction_output'
drivers/media/video/mt9v022.c:211: error: implicit declaration of function 'gpio_free'
drivers/media/video/mt9v022.c: In function 'bus_switch_act':
drivers/media/video/mt9v022.c:237: error: implicit declaration of function 'gpio_set_value_cansleep'
make[2]: *** [drivers/media/video] Error 2
make[1]: *** [drivers/media] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [drivers] Error 2

with this config:

http://redhat.com/~mingo/misc/config-Sat_May__3_16_08_39_CEST_2008.bad

the bug was that the driver uses GPIO functionality but only includes
the GPIO interface definitions for the CONFIG_MT9M001_PCA9536_SWITCH
case, which was not set in this config.

The quick fix seems to be to include linux/gpio.h unconditionally. (this
seems like a small cleanup as well as it removes and #ifdef is more
robust than an inclusion of asm/gpio.h) Not tested too much yet, so
please have another look in any case.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
drivers/media/video/mt9v022.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)

Index: linux/drivers/media/video/mt9v022.c
===================================================================
--- linux.orig/drivers/media/video/mt9v022.c
+++ linux/drivers/media/video/mt9v022.c
@@ -13,15 +13,12 @@
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/log2.h>
+#include <linux/gpio.h>

#include <media/v4l2-common.h>
#include <media/v4l2-chip-ident.h>
#include <media/soc_camera.h>

-#ifdef CONFIG_MT9M001_PCA9536_SWITCH
-#include <asm/gpio.h>
-#endif
-
/* mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c
* The platform has to define i2c_board_info
* and call i2c_register_board_info() */

\
 
 \ /
  Last update: 2008-05-03 18:33    [W:0.038 / U:2.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site