lkml.org 
[lkml]   [2008]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] I2C: SiByte: Correct a comment about frequency
 The frequency may have been once hardcoded to 100kHz, but currently it is
passed as an argument to i2c_sibyte_add_bus(), so update the comment to
match code. While at it, reformat a nearby comment for consistency. No
functional changes.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
---
It should be obvious. Please apply.

Maciej

patch-2.6.26-rc1-20080505-sibyte-i2c-add-bus-16
diff -up --recursive --new-file linux-2.6.26-rc1-20080505.macro/drivers/i2c/busses/i2c-sibyte.c linux-2.6.26-rc1-20080505/drivers/i2c/busses/i2c-sibyte.c
--- linux-2.6.26-rc1-20080505.macro/drivers/i2c/busses/i2c-sibyte.c 2008-05-05 02:55:25.000000000 +0000
+++ linux-2.6.26-rc1-20080505/drivers/i2c/busses/i2c-sibyte.c 2008-05-11 01:14:30.000000000 +0000
@@ -136,10 +136,10 @@ int __init i2c_sibyte_add_bus(struct i2c
{
struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;

- /* register new adapter to i2c module... */
+ /* Register new adapter to i2c module... */
i2c_adap->algo = &i2c_sibyte_algo;

- /* Set the frequency to 100 kHz */
+ /* Set the requested frequency. */
csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));


\
 
 \ /
  Last update: 2008-05-11 04:15    [W:0.423 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site