Messages in this thread |  | | Date | Tue, 8 Apr 2008 20:35:02 +0100 | From | Russell King <> | Subject | Re: [PATCH 6/6] Clocklib: use correct name for 3,6MHz clock |
| |
On Tue, Apr 08, 2008 at 01:52:41PM +0400, Dmitry wrote: > 2008/4/8, Andrew Morton <akpm@linux-foundation.org>: > > On Thu, 3 Apr 2008 17:24:11 +0400 > > Dmitry Baryshkov <dbaryshkov@gmail.com> wrote: > > > > > Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> > > > --- > > > arch/arm/common/sa1111.c | 2 +- > > > 1 files changed, 1 insertions(+), 1 deletions(-) > > > > > > diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c > > > index eb06d0b..282a4d9 100644 > > > --- a/arch/arm/common/sa1111.c > > > +++ b/arch/arm/common/sa1111.c > > > @@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) > > > if (!sachip) > > > return -ENOMEM; > > > > > > - sachip->clk = clk_get(me, "GPIO27_CLK"); > > > + sachip->clk = clk_get(me, "3_6MHz_CLK"); > > > if (!sachip->clk) { > > > ret = PTR_ERR(sachip->clk); > > > goto err_free; > > > > > > Again, there's just not enough information for us (well: me) to be able to > > evaluate this patch. > > > > For example, if the current name is "incorrect" then why shouldn't we fix > > it in 2.6.25? 2.6.24? etc. > > > > > > The name GPIO27_CLK came from sa1100 arm sub-arch. There the 3.6 MHz > clock was provided via GPIO 27. The PXA clocks code have copied the > name for the clock (as it's used by sa1111 companion chip that can be > used with both sa1100 and pxa). However on pxa the 3.6MHz clock is > provided by different PIN. So the name GPIO27_CLK is misleading and > incorrect for PXA.
So... what is the correct name. Bear in mind what I said in the previous reply this evening - which says that it should be the name used by the SA1111. Look in the data sheet - the pin itself to which the 3.6MHz clock is supplised will have a name. That's the name which should be used.
-- Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of:
|  |