Messages in this thread | | | From | "Denys Fedoryshchenko" <> | Subject | atyfb rmmod & vram crash, 2.6.24, 2.6.25-rc8 | Date | Wed, 2 Apr 2008 15:54:12 +0300 |
| |
VGA card i dont know how much RAM there actually, but lspci here shows looks like 16MB:
03:09.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c) (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Rage Pro Turbo Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 66 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=16M] Region 1: I/O ports at 2000 [size=256] Region 2: Memory at d0121000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: atyfb
Loading without parameters
atyfb: using auxiliary register aperture atyfb: 3D RAGE PRO (Mach64 GP, PQFP, PCI) [0x4750 rev 0x7c] atyfb: Mach64 BIOS is located at c0000, mapped at c00c0000. atyfb: BIOS frequency table: atyfb: PCLK_min_freq 984, PCLK_max_freq 23600, ref_freq 2950, ref_divider 64 atyfb: MCLK_pwd 4200, MCLK_max_freq 7500, XCLK_max_freq 10000, SCLK_freq 5000 atyfb: 8M SGRAM (1:1), 29.498928 MHz XTAL, 236 MHz PLL, 75 Mhz MCLK, 100 MHz XCLK atyfb: fb0: ATY Mach64 frame buffer device on PCI
It detects 8M. If i put parameter vram=8 atyfb: 3D RAGE PRO (Mach64 GP, PQFP, PCI) [0x4750 rev 0x7c] atyfb: Mach64 BIOS is located at c0000, mapped at c00c0000. atyfb: BIOS frequency table: atyfb: PCLK_min_freq 984, PCLK_max_freq 23600, ref_freq 2950, ref_divider 64 atyfb: MCLK_pwd 4200, MCLK_max_freq 7500, XCLK_max_freq 10000, SCLK_freq 5000 atyfb: 0M SGRAM (1:1), 29.498928 MHz XTAL, 236 MHz PLL, 75 Mhz MCLK, 100 MHz XCLK atyfb: not enough video RAM atyfb: can't set default video mode
And most interesting when i do rmmod tv1 ~ # rmmod atyfb Segmentation fault
and dmesg: BUG: unable to handle kernel NULL pointer dereference at 00000448 IP: [<ce8fd0f2>] :atyfb:aty_set_crtc+0x9/0x19d *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: atyfb(-) fb backlight cfbcopyarea cfbimgblt cfbfillrect rtc_cmos rtc_core rtc_lib e100 mii snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 i2c_core rng_core iTCO_wdt uhci_hcd usbcore [last unloaded: atyfb]
Pid: 5198, comm: rmmod Not tainted (2.6.25-rc8-video #1) EIP: 0060:[<ce8fd0f2>] EFLAGS: 00010286 CPU: 1 EIP is at aty_set_crtc+0x9/0x19d [atyfb] EAX: 00000000 EBX: 00000000 ECX: cd8c6854 EDX: ce9064a0 ESI: ce9064a0 EDI: ce905830 EBP: cc9a1ed0 ESP: cc9a1ec8 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process rmmod (pid: 5198, ti=cc9a1000 task=cc9da000 task.ti=cc9a1000) Stack: 00000000 ccacd000 cc9a1ee0 ce900d20 cd8c6800 ce905830 cc9a1eec c01c8376 cd8c6854 cc9a1efc c0208c92 cd8c3854 cd8c6854 cc9a1f10 c02090c1 ce905830 00000000 c0369060 cc9a1f24 c02086bc 00000000 ce905830 00000880 cc9a1f34 Call Trace: [<ce900d20>] ? atyfb_pci_remove+0x1d/0xb3 [atyfb] [<c01c8376>] ? pci_device_remove+0x19/0x39 [<c0208c92>] ? __device_release_driver+0x60/0x7d [<c02090c1>] ? driver_detach+0x8e/0xcd [<c02086bc>] ? bus_remove_driver+0x63/0x7f [<c020914c>] ? driver_unregister+0x2a/0x2e [<c01c852e>] ? pci_unregister_driver+0x1e/0x64 [<ce900d01>] ? atyfb_exit+0xd/0xf [atyfb] [<c013be85>] ? sys_delete_module+0x195/0x1d0 [<c0110b8c>] ? do_page_fault+0x251/0x505 [<c012e5cd>] ? up_read+0x16/0x29 [<c0110b8c>] ? do_page_fault+0x251/0x505 [<c0103892>] ? sysenter_past_esp+0x5f/0x91 ======================= Code: 01 00 00 00 e8 84 ff ff ff a8 02 74 0e 8b 07 89 83 dc 03 00 00 8b b3 50 04 00 00 89 f0 5b 5e 5f 5d c3 55 89 e5 56 53 89 c3 89 d6 <83> b8 48 04 00 00 00 74 5f 8b 52 2c 81 e2 ff ff ff fc 8b 80 48 EIP: [<ce8fd0f2>] aty_set_crtc+0x9/0x19d [atyfb] SS:ESP 0068:cc9a1ec8 ---[ end trace 1c998179e35e2f76 ]---
I will try to enable more debug, but probably this information is enough?
-- Denys Fedoryshchenko Technical Manager Virtual ISP S.A.L.
| |