lkml.org 
[lkml]   [2008]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] x86_64: force re setting the mmconf for fam10h if acpi=off

some BIOS only let AMD fam 10h handle bus0, and nvidia mcp55/ck804
to handle other buses. at that case MCFG will cover all over them.

but with acpi=off, we can not use MCFG. this patch will double check
the busnbits, and if it is less handling 256 bues, and acpi=off
will forcely reset the mmconf in msr, so we still use mmconf in above case.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>

Index: linux-2.6/arch/x86/kernel/setup_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup_64.c
+++ linux-2.6/arch/x86/kernel/setup_64.c
@@ -720,14 +720,21 @@ static void __cpuinit fam10h_check_enabl

/* try to make sure that AP's setting is identical to BSP setting */
if (val & FAM10H_MMIO_CONF_ENABLE) {
- u64 base;
- base = val & (0xffffULL << 32);
- if (fam10h_pci_mmconf_base_status <= 0) {
- fam10h_pci_mmconf_base = base;
- fam10h_pci_mmconf_base_status = 1;
- return;
- } else if (fam10h_pci_mmconf_base == base)
- return;
+ unsigned busnbits;
+ busnbits = (val >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
+ FAM10H_MMIO_CONF_BUSRANGE_MASK;
+
+ /* only trust the one handle 256 buses, if acpi=off */
+ if (!acpi_pci_disabled || busnbits >= 8) {
+ u64 base;
+ base = val & (0xffffULL << 32);
+ if (fam10h_pci_mmconf_base_status <= 0) {
+ fam10h_pci_mmconf_base = base;
+ fam10h_pci_mmconf_base_status = 1;
+ return;
+ } else if (fam10h_pci_mmconf_base == base)
+ return;
+ }
}

/*

\
 
 \ /
  Last update: 2008-02-26 03:35    [W:0.052 / U:0.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site