Messages in this thread | | | From | Tim Ellis <> | Subject | Re: [PATCH] libata: Add MMIO support to pata_sil680 | Date | Tue, 12 Feb 2008 15:58:08 +0000 |
| |
Hi, This change causes attached drives to no longer be detected and function on the PowerPC Buffalo Linkstation machines:
<7>pata_sil680 0000:00:0c.0: version 0.4.8 <6>sil680: 133MHz clock. <6>scsi0 : pata_sil680 <6>scsi1 : pata_sil680 <6>ata1: PATA max UDMA/133 irq 18 <6>ata2: PATA max UDMA/133 irq 18
If I roll back this driver to before this change with 2.6.24.2 it works:
<7>pata_sil680 0000:00:0c.0: version 0.4.7 <6>sil680: 133MHz clock. <6>scsi0 : pata_sil680 <6>scsi1 : pata_sil680 <6>ata1: PATA max UDMA/133 cmd 0xbffed0 ctl 0xbffed8 bmdma 0xbffef0 irq 18 <6>ata2: PATA max UDMA/133 cmd 0xbffee0 ctl 0xbffee8 bmdma 0xbffef8 irq 18 <6>ata1.00: ATA-6: WDC WD3200JB-00KFA0, 08.05J08, max UDMA/100 <6>ata1.00: 625142448 sectors, multi 0: LBA48 <6>ata1.00: configured for UDMA/100 <5>scsi 0:0:0:0: Direct-Access ATA WDC WD3200JB-00K 08.0 PQ: 0 ANSI: 5 <5>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6> sda: sda1 sda2 sda3 sda4 <5>sd 0:0:0:0: [sda] Attached SCSI disk <5>sd 0:0:0:0: Attached scsi generic sg0 type 0
I have ensured the other sil680 driver is not enabled!
| |