lkml.org 
[lkml]   [2008]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.27.3, ata_piix: cannot play audio CD, "disk change detected"
Harald Dunkel wrote:
> Hi folks,
>
> If I insert an audio CD in my sata drive to play it via grip, then
> it fails. Grip does not even show the list of audio tracks, nor does
> it play the CD. Instead there is a kernel message saying
>
> [ 6730.836999] sr0: CDROM not ready yet.
> [ 6732.838572] sr0: disc change detected.
> [ 6783.659021] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 6783.659034] ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> [ 6783.659035] cdb 1b 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
> [ 6783.659036] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
> [ 6783.659038] ata4.00: status: { DRDY }
> [ 6783.659046] ata4: hard resetting link
> [ 6784.115039] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 6785.622185] ata4.00: configured for UDMA/100
> [ 6785.622193] ata4: EH complete
>
>
> The same CDs work fine with an USB CD drive attached to the same
> PC, so this might be a sata driver issue. (BTW, stopping hal doesn't
> make a difference. Data CDs work fine.)
>
> Any idea what goes wrong here? Does grip violate the SCSI protocol
> here? Is there something I could try to help to track this down?

Well, it looks like it was a START STOP UNIT command with the eject bit
set that timed out. Was something trying to eject the disc?


\
 
 \ /
  Last update: 2008-10-28 02:33    [W:0.021 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site