lkml.org 
[lkml]   [2008]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch 2.6.27.y 6/6] firewire: fw-sbp2: fix races
Date: Fri, 24 Oct 2008 15:26:20 -0400
From: Jay Fenlason <fenlason@redhat.com>

1: There is a small race between queue_delayed_work() and its
corresponding kref_get(). Do the kref_get first, and _put it again
if the queue_delayed_work() failed, so there is no chance of the
kref going to zero while the work is scheduled.
2: An SBP2_LOGOUT_REQUEST could be sent out with a login_id full of
garbage. Initialize it to an invalid value so we can tell if we
ever got a valid login_id.
3: The node ID and generation may have changed but the new values may
not yet have been recorded in lu and tgt when the final logout is
attempted. Use the latest values from the device in
sbp2_release_target().

Same as commit cd1f70fdb4823c97328a1f151f328eb36fafd579.

Signed-off-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
drivers/firewire/fw-sbp2.c | 36 ++++++++++++++++++++++++++----------
1 file changed, 26 insertions(+), 10 deletions(-)

Index: linux/drivers/firewire/fw-sbp2.c
===================================================================
--- linux.orig/drivers/firewire/fw-sbp2.c
+++ linux/drivers/firewire/fw-sbp2.c
@@ -172,6 +172,9 @@ struct sbp2_target {
int blocked; /* ditto */
};

+/* Impossible login_id, to detect logout attempt before successful login */
+#define INVALID_LOGIN_ID 0x10000
+
/*
* Per section 7.4.8 of the SBP-2 spec, a mgt_ORB_timeout value can be
* provided in the config rom. Most devices do provide a value, which
@@ -791,9 +794,20 @@ static void sbp2_release_target(struct k
scsi_remove_device(sdev);
scsi_device_put(sdev);
}
- sbp2_send_management_orb(lu, tgt->node_id, lu->generation,
- SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
-
+ if (lu->login_id != INVALID_LOGIN_ID) {
+ int generation, node_id;
+ /*
+ * tgt->node_id may be obsolete here if we failed
+ * during initial login or after a bus reset where
+ * the topology changed.
+ */
+ generation = device->generation;
+ smp_rmb(); /* node_id vs. generation */
+ node_id = device->node_id;
+ sbp2_send_management_orb(lu, node_id, generation,
+ SBP2_LOGOUT_REQUEST,
+ lu->login_id, NULL);
+ }
fw_core_remove_address_handler(&lu->address_handler);
list_del(&lu->link);
kfree(lu);
@@ -808,19 +822,20 @@ static void sbp2_release_target(struct k

static struct workqueue_struct *sbp2_wq;

+static void sbp2_target_put(struct sbp2_target *tgt)
+{
+ kref_put(&tgt->kref, sbp2_release_target);
+}
+
/*
* Always get the target's kref when scheduling work on one its units.
* Each workqueue job is responsible to call sbp2_target_put() upon return.
*/
static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay)
{
- if (queue_delayed_work(sbp2_wq, &lu->work, delay))
- kref_get(&lu->tgt->kref);
-}
-
-static void sbp2_target_put(struct sbp2_target *tgt)
-{
- kref_put(&tgt->kref, sbp2_release_target);
+ kref_get(&lu->tgt->kref);
+ if (!queue_delayed_work(sbp2_wq, &lu->work, delay))
+ sbp2_target_put(lu->tgt);
}

static void
@@ -993,6 +1008,7 @@ static int sbp2_add_logical_unit(struct

lu->tgt = tgt;
lu->lun = lun_entry & 0xffff;
+ lu->login_id = INVALID_LOGIN_ID;
lu->retries = 0;
lu->has_sdev = false;
lu->blocked = false;
--
Stefan Richter
-=====-==--- =-=- ==-==
http://arcgraph.de/sr/


\
 
 \ /
  Last update: 2008-10-27 23:33    [W:0.042 / U:1.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site