Messages in this thread | | | Subject | 2.6.27.3: usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd pcscd rqt 161 rq 3 len 1024 ret -110 | From | Frederik Himpe <> | Date | Sun, 26 Oct 2008 15:17:18 +0100 |
| |
When trying to get the Broadcom 5800 Smartcard reader in my Dell Latitude E6400 working with pcscd and the latest svn version of the ccid driver, I get the error usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd pcscd rqt 161 rq 3 len 1024 ret -110
in my demsg log.
I attached usbmon trace, the output of pcscd -f -d and dmesg and lsusb -v.
I have succeeded in using this smartcard reader successfully once, but it seems to fail most of the time with these errors. Even when it worked, restarting pcscd was enough to trigger the same errors and get the smartcard reader inaccessible again.
-- Frederik Himpe <fhimpe@vub.ac.be> ffff8800b8424900 406827483 S Ci:5:002:0 s a1 03 0000 0001 0400 1024 < ffff8800b8424900 408828955 C Ci:5:002:0 -2 0 ffff8800b657dd80 408829218 S Bo:5:002:2 -115 10 = 65000000 00000000 0000 ffff8800b657dd80 408829947 C Bo:5:002:2 0 10 > ffff8800b657dd80 408830548 S Bi:5:002:2 -115 10 < ffff8800b657dd80 410831954 C Bi:5:002:2 -2 0 ffff8800b657dd80 410832029 S Bo:5:002:2 -115 10 = 65000000 00000100 0000 ffff8800b657dd80 410832947 C Bo:5:002:2 0 10 > ffff8800b657dd80 410833548 S Bi:5:002:2 -115 10 < ffff8800b657dd80 412834954 C Bi:5:002:2 -2 0 ffff8800b8424000 412835087 S Bo:5:002:2 -115 10 = 65000000 00000200 0000 ffff8800b8424000 412836948 C Bo:5:002:2 0 10 > ffff8800b8424000 412837546 S Bi:5:002:2 -115 10 < ffff8800b8424000 412837948 C Bi:5:002:2 0 10 = 81000000 00000241 fb00 ffff8800b8424000 412838958 S Co:5:002:0 s 01 0b 0000 0001 0000 0 ffff8800b8424000 412839948 C Co:5:002:0 -32 0 ffff8800b8424000 412839973 S Co:5:002:0 s 02 01 0000 0082 0000 0 ffff8800b8424000 412840948 C Co:5:002:0 -32 0 ffff8800b8424000 412840971 S Co:5:002:0 s 02 01 0000 0002 0000 0 ffff8800b8424000 412841948 C Co:5:002:0 -32 0 ffff8800b8424000 412841972 S Co:5:002:0 s 02 01 0000 0086 0000 0 ffff8800b8424000 412842948 C Co:5:002:0 -32 0 ffff8800ce452300 414188715 S Ci:5:002:0 s a1 03 0000 0001 0400 1024 < ffff8800ce452300 416189957 C Ci:5:002:0 -2 0 ffff8800ce4986c0 416190180 S Bo:5:002:2 -115 10 = 65000000 00000000 0000 ffff8800ce4986c0 416190950 C Bo:5:002:2 0 10 > ffff8800ce4986c0 416191597 S Bi:5:002:2 -115 10 < ffff8800ce4986c0 418192955 C Bi:5:002:2 -2 0 ffff8800b1594540 418193083 S Bo:5:002:2 -115 10 = 65000000 00000100 0000 ffff8800b1594540 418193949 C Bo:5:002:2 0 10 > ffff8800b1594540 418194553 S Bi:5:002:2 -115 10 < ffff8800b1594540 420195956 C Bi:5:002:2 -2 0 ffff8800b00f5900 420196087 S Bo:5:002:2 -115 10 = 65000000 00000200 0000 ffff8800b00f5900 420196949 C Bo:5:002:2 0 10 > ffff8800b00f5900 420197552 S Bi:5:002:2 -115 10 < ffff8800b00f5900 420197948 C Bi:5:002:2 0 10 = 81000000 00000241 fb00 ffff8800b00f5900 420198959 S Co:5:002:0 s 01 0b 0000 0001 0000 0 ffff8800b00f5900 420199950 C Co:5:002:0 -32 0 ffff8800b00f5900 420199975 S Co:5:002:0 s 02 01 0000 0082 0000 0 ffff8800b00f5900 420200949 C Co:5:002:0 -32 0 ffff8800b00f5900 420200973 S Co:5:002:0 s 02 01 0000 0002 0000 0 ffff8800b00f5900 420201949 C Co:5:002:0 -32 0 ffff8800b00f5900 420201972 S Co:5:002:0 s 02 01 0000 0086 0000 0 ffff8800b00f5900 420202949 C Co:5:002:0 -32 0 # pcscd -f -d 00000000 pcscdaemon.c:280:main() pcscd set to foreground with debug send to stderr 00000020 debuglog.c:239:DebugLogSetLevel() debug level=debug 00000338 pcscdaemon.c:498:main() pcsc-lite 1.4.102 daemon ready. 00126004 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x413C, PID: 0x8156 00000761 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x413C, PID: 0x8156 00000729 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x413C, PID: 0x8156 00000739 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x413C, PID: 0x8156 00013881 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002 00000941 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0001 00000940 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0001 00000966 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0001 00001846 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002 00000930 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0A5C, PID: 0x5800 00000042 hotplug_libhal.c:342:HPAddDevice() Adding USB device: usb_device_a5c_5800_0123456789ABCD_if1 01000659 readerfactory.c:1082:RFInitializeReader() Attempting startup of Broadcom 5880 00 00 using /usr/lib64/pcsc/drivers//ifd-ccid.bundle/Contents/Linux/libccid.so 00000247 readerfactory.c:949:RFBindFunctions() Loading IFD Handler 3.0 00000055 ifdhandler.c:1352:init_driver() Driver version: 1.3.8 00000285 ifdhandler.c:1365:init_driver() LogLevel: 0x0003 00000232 ifdhandler.c:1385:init_driver() DriverOptions: 0x0000 00000033 ifdhandler.c:81:IFDHCreateChannelByName() lun: 0, device: usb:0a5c/5800:libhal:/org/freedesktop/Hal/devices/usb_device_a5c_5800_0123456789ABCD_if1 00228867 ccid_usb.c:236:OpenUSBByName() Manufacturer: Ludovic Rousseau (ludovic.rousseau@free.fr) 00000247 ccid_usb.c:246:OpenUSBByName() ProductString: Generic CCID driver 00000229 ccid_usb.c:252:OpenUSBByName() Copyright: This driver is protected by terms of the GNU Lesser General Public License version 2.1, or (at your option) any later version. 00084827 ccid_usb.c:408:OpenUSBByName() Found Vendor/Product: 0A5C/5800 (Broadcom 5880) 00000074 ccid_usb.c:410:OpenUSBByName() Using USB bus/device: 005/002 02000817 ccid_usb.c:780:get_data_rates() IFD does not support GET_DATA_RATES request: Connection timed out 02003888 ccid_usb.c:526:ReadUSB() usb_bulk_read(005/002): Resource temporarily unavailable 02002999 ccid_usb.c:526:ReadUSB() usb_bulk_read(005/002): Resource temporarily unavailable 00001970 commands.c:945:CmdGetSlotStatus Hardware error 00000031 ifdhandler.c:119:IFDHCreateChannelByName() failed 00004982 readerfactory.c:1121:RFInitializeReader() Open Port 200000 Failed (usb:0a5c/5800:libhal:/org/freedesktop/Hal/devices/usb_device_a5c_5800_0123456789ABCD_if1) 00000031 readerfactory.c:994:RFUnloadReader() Unloading reader driver. 00000060 readerfactory.c:249:RFAddReader() Broadcom 5880 init failed. 00000032 hotplug_libhal.c:395:HPAddDevice() Failed adding USB device: usb_device_a5c_5800_0123456789ABCD_if1 00000844 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0A5C, PID: 0x5800 00000035 hotplug_libhal.c:342:HPAddDevice() Adding USB device: usb_device_a5c_5800_0123456789ABCD_if0 01000669 readerfactory.c:1082:RFInitializeReader() Attempting startup of Broadcom 5880 00 00 using /usr/lib64/pcsc/drivers//ifd-ccid.bundle/Contents/Linux/libccid.so 00000175 readerfactory.c:949:RFBindFunctions() Loading IFD Handler 3.0 00000025 ifdhandler.c:1352:init_driver() Driver version: 1.3.8 00000240 ifdhandler.c:1365:init_driver() LogLevel: 0x0003 00000205 ifdhandler.c:1385:init_driver() DriverOptions: 0x0000 00000007 ifdhandler.c:81:IFDHCreateChannelByName() lun: 0, device: usb:0a5c/5800:libhal:/org/freedesktop/Hal/devices/usb_device_a5c_5800_0123456789ABCD_if0 00235171 ccid_usb.c:236:OpenUSBByName() Manufacturer: Ludovic Rousseau (ludovic.rousseau@free.fr) 00000266 ccid_usb.c:246:OpenUSBByName() ProductString: Generic CCID driver 00000230 ccid_usb.c:252:OpenUSBByName() Copyright: This driver is protected by terms of the GNU Lesser General Public License version 2.1, or (at your option) any later version. 00078135 ccid_usb.c:408:OpenUSBByName() Found Vendor/Product: 0A5C/5800 (Broadcom 5880) 00000042 ccid_usb.c:410:OpenUSBByName() Using USB bus/device: 005/002 02000923 ccid_usb.c:780:get_data_rates() IFD does not support GET_DATA_RATES request: Connection timed out 02002933 ccid_usb.c:526:ReadUSB() usb_bulk_read(005/002): Resource temporarily unavailable 02002995 ccid_usb.c:526:ReadUSB() usb_bulk_read(005/002): Resource temporarily unavailable 00001971 commands.c:945:CmdGetSlotStatus Hardware error 00000031 ifdhandler.c:119:IFDHCreateChannelByName() failed 00004979 readerfactory.c:1121:RFInitializeReader() Open Port 200000 Failed (usb:0a5c/5800:libhal:/org/freedesktop/Hal/devices/usb_device_a5c_5800_0123456789ABCD_if0) 00000032 readerfactory.c:994:RFUnloadReader() Unloading reader driver. 00000061 readerfactory.c:249:RFAddReader() Broadcom 5880 init failed. 00000032 hotplug_libhal.c:395:HPAddDevice() Failed adding USB device: usb_device_a5c_5800_0123456789ABCD_if0 00001033 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0001 00001041 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0001 00003169 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0A5C, PID: 0x4500 00000677 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x413C, PID: 0x8158 00000860 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x413C, PID: 0x8157 00001068 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0001 ^C51374917 pcscdaemon.c:563:signal_trap() Preparing for suicide 01000062 readerfactory.c:1348:RFCleanupReaders() entering cleaning function 00000080 pcscdaemon.c:523:at_exit() cleaning /var/run/pcscd [root@defected frederik]# pcscd -f -d 00000000 pcscdaemon.c:280:main() pcscd set to foreground with debug send to stderr 00000020 debuglog.c:239:DebugLogSetLevel() debug level=debug 00000347 pcscdaemon.c:498:main() pcsc-lite 1.4.102 daemon ready. 00165111 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x413C, PID: 0x8156 00000785 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x413C, PID: 0x8156 00000734 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x413C, PID: 0x8156 00000753 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x413C, PID: 0x8156 00036189 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002 00004089 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0001 00001033 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0001 00000974 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0001 00001906 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0002 00000975 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0A5C, PID: 0x5800 00000033 hotplug_libhal.c:342:HPAddDevice() Adding USB device: usb_device_a5c_5800_0123456789ABCD_if1 01000486 readerfactory.c:1082:RFInitializeReader() Attempting startup of Broadcom 5880 00 00 using /usr/lib64/pcsc/drivers//ifd-ccid.bundle/Contents/Linux/libccid.so 00000197 readerfactory.c:949:RFBindFunctions() Loading IFD Handler 3.0 00000024 ifdhandler.c:1352:init_driver() Driver version: 1.3.8 00000243 ifdhandler.c:1365:init_driver() LogLevel: 0x0003 00000204 ifdhandler.c:1385:init_driver() DriverOptions: 0x0000 00000007 ifdhandler.c:81:IFDHCreateChannelByName() lun: 0, device: usb:0a5c/5800:libhal:/org/freedesktop/Hal/devices/usb_device_a5c_5800_0123456789ABCD_if1 00254393 ccid_usb.c:236:OpenUSBByName() Manufacturer: Ludovic Rousseau (ludovic.rousseau@free.fr) 00000279 ccid_usb.c:246:OpenUSBByName() ProductString: Generic CCID driver 00000229 ccid_usb.c:252:OpenUSBByName() Copyright: This driver is protected by terms of the GNU Lesser General Public License version 2.1, or (at your option) any later version. 00113982 ccid_usb.c:408:OpenUSBByName() Found Vendor/Product: 0A5C/5800 (Broadcom 5880) 00000066 ccid_usb.c:410:OpenUSBByName() Using USB bus/device: 005/002 02001678 ccid_usb.c:780:get_data_rates() IFD does not support GET_DATA_RATES request: Connection timed out 02002880 ccid_usb.c:526:ReadUSB() usb_bulk_read(005/002): Resource temporarily unavailable 02002998 ccid_usb.c:526:ReadUSB() usb_bulk_read(005/002): Resource temporarily unavailable 00002973 commands.c:945:CmdGetSlotStatus Hardware error 00000030 ifdhandler.c:119:IFDHCreateChannelByName() failed 00004981 readerfactory.c:1121:RFInitializeReader() Open Port 200000 Failed (usb:0a5c/5800:libhal:/org/freedesktop/Hal/devices/usb_device_a5c_5800_0123456789ABCD_if1) 00000030 readerfactory.c:994:RFUnloadReader() Unloading reader driver. 00000058 readerfactory.c:249:RFAddReader() Broadcom 5880 init failed. 00000031 hotplug_libhal.c:395:HPAddDevice() Failed adding USB device: usb_device_a5c_5800_0123456789ABCD_if1 00000844 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0A5C, PID: 0x5800 00000035 hotplug_libhal.c:342:HPAddDevice() Adding USB device: usb_device_a5c_5800_0123456789ABCD_if0 01000659 readerfactory.c:1082:RFInitializeReader() Attempting startup of Broadcom 5880 00 00 using /usr/lib64/pcsc/drivers//ifd-ccid.bundle/Contents/Linux/libccid.so 00000224 readerfactory.c:949:RFBindFunctions() Loading IFD Handler 3.0 00000054 ifdhandler.c:1352:init_driver() Driver version: 1.3.8 00000271 ifdhandler.c:1365:init_driver() LogLevel: 0x0003 00000232 ifdhandler.c:1385:init_driver() DriverOptions: 0x0000 00000033 ifdhandler.c:81:IFDHCreateChannelByName() lun: 0, device: usb:0a5c/5800:libhal:/org/freedesktop/Hal/devices/usb_device_a5c_5800_0123456789ABCD_if0 00228444 ccid_usb.c:236:OpenUSBByName() Manufacturer: Ludovic Rousseau (ludovic.rousseau@free.fr) 00000283 ccid_usb.c:246:OpenUSBByName() ProductString: Generic CCID driver 00000230 ccid_usb.c:252:OpenUSBByName() Copyright: This driver is protected by terms of the GNU Lesser General Public License version 2.1, or (at your option) any later version. 00114181 ccid_usb.c:408:OpenUSBByName() Found Vendor/Product: 0A5C/5800 (Broadcom 5880) 00000082 ccid_usb.c:410:OpenUSBByName() Using USB bus/device: 005/002 02001405 ccid_usb.c:780:get_data_rates() IFD does not support GET_DATA_RATES request: Connection timed out 02002920 ccid_usb.c:526:ReadUSB() usb_bulk_read(005/002): Resource temporarily unavailable 02003004 ccid_usb.c:526:ReadUSB() usb_bulk_read(005/002): Resource temporarily unavailable 00001971 commands.c:945:CmdGetSlotStatus Hardware error 00000031 ifdhandler.c:119:IFDHCreateChannelByName() failed 00004978 readerfactory.c:1121:RFInitializeReader() Open Port 200000 Failed (usb:0a5c/5800:libhal:/org/freedesktop/Hal/devices/usb_device_a5c_5800_0123456789ABCD_if0) 00000032 readerfactory.c:994:RFUnloadReader() Unloading reader driver. 00000061 readerfactory.c:249:RFAddReader() Broadcom 5880 init failed. 00000032 hotplug_libhal.c:395:HPAddDevice() Failed adding USB device: usb_device_a5c_5800_0123456789ABCD_if0 00001042 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0001 00001052 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0001 00002827 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0A5C, PID: 0x4500 00000658 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x413C, PID: 0x8158 00000856 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x413C, PID: 0x8157 00001058 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x1D6B, PID: 0x0001 ^C10871136 pcscdaemon.c:563:signal_trap() Preparing for suicide 01000043 readerfactory.c:1348:RFCleanupReaders() entering cleaning function 00000086 pcscdaemon.c:523:at_exit() cleaning /var/run/pcscd Linux version 2.6.27.3-1mdv (mandrake@celeste.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 Wed Oct 22 21:53:22 EDT 2008 Command line: BOOT_IMAGE=2.6.27.3-1 root=/dev/Linux/root splash=silent intel_iommu=off vga=788 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 00000000dd04d400 (usable) BIOS-e820: 00000000dd04d400 - 00000000dd04f400 (ACPI NVS) BIOS-e820: 00000000dd04f400 - 00000000e0000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) last_pfn = 0x120000 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xdd04d max_arch_pfn = 0x3ffffffff init_memory_mapping 0000000000 - 00dd000000 page 2M 00dd000000 - 00dd04d000 page 4k kernel direct mapping tables up to dd04d000 @ 8000-e000 last_map_addr: dd04d000 end: dd04d000 init_memory_mapping 0100000000 - 0120000000 page 2M kernel direct mapping tables up to 120000000 @ c000-12000 last_map_addr: 120000000 end: 120000000 RAMDISK: 37b64000 - 37fef9c0 DMI 2.4 present. ACPI: RSDP 000FB990, 0024 (r2 DELL ) ACPI: XSDT DD051E00, 006C (r1 DELL M09 27D80901 ASL 61) ACPI: FACP DD051C9C, 00F4 (r4 DELL M09 27D80901 ASL 61) ACPI: DSDT DD052400, 6977 (r2 INT430 SYSFexxx 1001 INTL 20050624) ACPI: FACS DD060C00, 0040 ACPI: HPET DD051F00, 0038 (r1 DELL M09 1 ASL 61) ACPI: DMAR DD060400, 00F8 (r1 DELL M09 27D80901 ASL 61) ACPI: APIC DD052000, 0068 (r1 DELL M09 27D80901 ASL 47) ACPI: ASF! DD051C00, 006A (r32 DELL M09 27D80901 ASL 61) ACPI: MCFG DD051FC0, 003E (r16 DELL M09 27D80901 ASL 61) ACPI: SLIC DD05209C, 0176 (r1 DELL M09 27D80901 ASL 61) ACPI: TCPA DD052300, 0032 (r1 0 ASL 0) ACPI: SSDT DD05032D, 066C (r1 PmRef CpuPm 3000 INTL 20050624) (7 early reservations) ==> bootmem [0000000000 - 0120000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000070b598] TEXT DATA BSS ==> [0000200000 - 000070b598] #3 [0037b64000 - 0037fef9c0] RAMDISK ==> [0037b64000 - 0037fef9c0] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ffffe20000000000-ffffe20003ffffff] PMD -> [ffff880028200000-ffff88002c1fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00120000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000dd04d 0: 0x00100000 -> 0x00120000 On node 0 totalpages: 1036268 DMA zone: 2547 pages, LIFO batch:0 DMA32 zone: 886917 pages, LIFO batch:31 Normal zone: 129280 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) WARNING: NR_CPUS limit of 1 reached. Processor ignored. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000dd04d000 - 00000000dd04e000 PM: Registered nosave memory: 00000000dd04e000 - 00000000dd04f000 PM: Registered nosave memory: 00000000dd04f000 - 00000000dd050000 PM: Registered nosave memory: 00000000dd050000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000 PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000 PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000 PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffe60000 PM: Registered nosave memory: 00000000ffe60000 - 0000000100000000 Allocating PCI resources starting at e2000000 (gap: e0000000:18000000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1018744 Kernel command line: BOOT_IMAGE=2.6.27.3-1 root=/dev/Linux/root splash=silent intel_iommu=off vga=788 Intel-IOMMU: disabled Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC: PIT calibration confirmed by PMTIMER. TSC: using PMTIMER calibration value Detected 2260.978 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x20000000 - 0x24000000 Memory: 3996444k/4718592k available (2748k kernel code, 147644k reserved, 1460k data, 396k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.95 BogoMIPS (lpj=2260978) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. CPU: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06 ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Using local APIC timer interrupts. APIC timer calibration result 16624849 Detected 16.624 MHz APIC timer. net_namespace: 1536 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: DMI System Vendor: Dell Inc. ACPI: DMI Product Name: Latitude E6400 ACPI: DMI Product Version: ACPI: DMI Board Name: 0RX493 ACPI: DMI BIOS Vendor: Dell Inc. ACPI: DMI BIOS Date: 09/01/2008 ACPI: Please send DMI info above to linux-acpi@vger.kernel.org ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:02.0 reg 10 64bit mmio: [f6c00000, f6ffffff] PCI: 0000:00:02.0 reg 18 32bit mmio: [e0000000, efffffff] PCI: 0000:00:02.0 reg 20 io port: [ef98, ef9f] PCI: 0000:00:02.1 reg 10 64bit mmio: [f6b00000, f6bfffff] PCI: 0000:00:19.0 reg 10 32bit mmio: [f6ae0000, f6afffff] PCI: 0000:00:19.0 reg 14 32bit mmio: [f6adb000, f6adbfff] PCI: 0000:00:19.0 reg 18 io port: [efe0, efff] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled PCI: 0000:00:1a.0 reg 20 io port: [6f60, 6f7f] PCI: 0000:00:1a.1 reg 20 io port: [6f80, 6f9f] PCI: 0000:00:1a.2 reg 20 io port: [6fa0, 6fbf] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fed1c400, fed1c7ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled PCI: 0000:00:1b.0 reg 10 64bit mmio: [f6adc000, f6adffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [6f00, 6f1f] PCI: 0000:00:1d.1 reg 20 io port: [6f20, 6f3f] PCI: 0000:00:1d.2 reg 20 io port: [6f40, 6f5f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fed1c000, fed1c3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled PCI: 0000:00:1f.2 reg 10 io port: [6e70, 6e77] PCI: 0000:00:1f.2 reg 14 io port: [6e78, 6e7b] PCI: 0000:00:1f.2 reg 18 io port: [6e80, 6e87] PCI: 0000:00:1f.2 reg 1c io port: [6e88, 6e8b] PCI: 0000:00:1f.2 reg 20 io port: [6ea0, 6ebf] PCI: 0000:00:1f.2 reg 24 32bit mmio: [fed1c800, fed1cfff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 10 64bit mmio: [f6adaf00, f6adafff] PCI: 0000:00:1f.3 reg 20 io port: [1100, 111f] PCI: 0000:0c:00.0 reg 10 64bit mmio: [f69fe000, f69fffff] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled PCI: bridge 0000:00:1c.1 32bit mmio: [f6900000, f69fffff] PCI: 0000:03:01.0 reg 10 32bit mmio: [0, fff] pci 0000:03:01.0: supports D1 pci 0000:03:01.0: supports D2 pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.0: PME# disabled PCI: 0000:03:01.1 reg 10 32bit mmio: [f68ff800, f68fffff] pci 0000:03:01.1: supports D1 pci 0000:03:01.1: supports D2 pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.1: PME# disabled PCI: 0000:03:01.2 reg 10 32bit mmio: [f68ff700, f68ff7ff] pci 0000:03:01.2: supports D1 pci 0000:03:01.2: supports D2 pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.2: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 32bit mmio: [f6800000, f68fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3 ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 system 00:05: ioport range 0xc80-0xcaf has been reserved system 00:05: ioport range 0xcc0-0xcff could not be reserved system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved system 00:0a: ioport range 0xcb0-0xcbb has been reserved system 00:0a: iomem range 0xfed40000-0xfed44fff could not be reserved system 00:0b: ioport range 0x900-0x92f has been reserved system 00:0b: ioport range 0x931-0x933 has been reserved system 00:0b: ioport range 0x935-0x97f has been reserved system 00:0b: ioport range 0x4d0-0x4d1 has been reserved system 00:0b: ioport range 0x1000-0x1005 has been reserved system 00:0b: ioport range 0x1008-0x100f has been reserved system 00:0c: ioport range 0xf400-0xf4fe has been reserved system 00:0c: ioport range 0x1006-0x1007 has been reserved system 00:0c: ioport range 0x100a-0x1059 could not be reserved system 00:0c: ioport range 0x1060-0x107f has been reserved system 00:0c: ioport range 0x1080-0x10bf has been reserved system 00:0c: ioport range 0x1100-0x111f has been reserved system 00:0c: ioport range 0x1010-0x102f has been reserved system 00:0c: ioport range 0x809-0x809 has been reserved system 00:0d: iomem range 0x0-0x9efff could not be reserved system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff has been reserved system 00:0d: iomem range 0x100000-0xdd04d3ff could not be reserved system 00:0d: iomem range 0xdd04d400-0xddafffff could not be reserved system 00:0d: iomem range 0xddb00000-0xddbfffff could not be reserved system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved system 00:0d: iomem range 0xfee00000-0xfee0ffff could not be reserved system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:0d: iomem range 0xfeda0000-0xfeda3fff could not be reserved system 00:0d: iomem range 0xfeda4000-0xfeda4fff could not be reserved system 00:0d: iomem range 0xfeda5000-0xfeda5fff could not be reserved system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved system 00:0d: iomem range 0xfed1c800-0xfed1cfff has been reserved system 00:0d: iomem range 0xfed18000-0xfed1bfff could not be reserved system 00:0d: iomem range 0xf8000000-0xfbffffff could not be reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: disabled pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04 pci 0000:03:01.0: IO window: 0x002000-0x0020ff pci 0000:03:01.0: IO window: 0x002400-0x0024ff pci 0000:03:01.0: PREFETCH window: 0xf0000000-0xf3ffffff pci 0000:03:01.0: MEM window: 0x120000000-0x123ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: 0x2000-0x2fff pci 0000:00:1e.0: MEM window: 0xf6800000-0xf68fffff pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 0b index 0 mmio: [0, 0] bus: 0b index 1 mmio: [0, 0] bus: 0b index 2 mmio: [0, 0] bus: 0b index 3 mmio: [0, 0] bus: 0c index 0 mmio: [0, 0] bus: 0c index 1 mmio: [f6900000, f69fffff] bus: 0c index 2 mmio: [0, 0] bus: 0c index 3 mmio: [0, 0] bus: 0d index 0 mmio: [0, 0] bus: 0d index 1 mmio: [0, 0] bus: 0d index 2 mmio: [0, 0] bus: 0d index 3 mmio: [0, 0] bus: 03 index 0 io port: [2000, 2fff] bus: 03 index 1 mmio: [f6800000, f68fffff] bus: 03 index 2 mmio: [f0000000, f3ffffff] bus: 03 index 3 io port: [0, ffff] bus: 03 index 4 mmio: [0, ffffffffffffffff] bus: 04 index 0 io port: [2000, 20ff] bus: 04 index 1 io port: [2400, 24ff] bus: 04 index 2 mmio: [f0000000, f3ffffff] bus: 04 index 3 mmio: [120000000, 123ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Switched to high resolution mode on CPU 0 Freeing initrd memory: 4654k freed audit: initializing netlink socket (disabled) type=2000 audit(1225032143.641:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7816 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20004100000, using 1875k, total 32704k vesafb: mode is 800x600x16, linelength=1600, pages=33 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Mobile Intel? GM45 Express Chipset agpgart-intel 0000:00:00.0: detected 32252K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Warning: Keylock active. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered registered taskstats version 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 396k freed input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.3-1mdv ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected input: PS/2 Generic Mouse as /class/input/input2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.3-1mdv ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.3-1mdv uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.3-1mdv uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice hub 3-1:1.0: USB hub found hub 3-1:1.0: 3 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.3-1mdv uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27.3-1mdv uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: BCM2046B1 usb 3-1: Manufacturer: Broadcom usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.27.3-1mdv uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 5-1: new full speed USB device using uhci_hcd and address 2 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.27.3-1mdv uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods No dock devices found. libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 284 ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 284 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 284 ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 284 usb 5-1: configuration #0 chosen from 1 choice usb 5-1: config 0 descriptor?? usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-1: Product: 5880 usb 5-1: Manufacturer: Broadcom Corp usb 5-1: SerialNumber: 0123456789ABCD usb 3-1.1: new full speed USB device using uhci_hcd and address 3 usb 3-1.1: configuration #1 chosen from 1 choice usb 3-1.1: New USB device found, idVendor=413c, idProduct=8157 usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-1.2: new full speed USB device using uhci_hcd and address 4 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) usb 3-1.2: configuration #1 chosen from 1 choice usb 3-1.2: New USB device found, idVendor=413c, idProduct=8158 usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 ata1.00: ATA-8: ST9160411ASG, DE13, max UDMA/133 ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: PLDS DVD+/-RW DU-8A2S, 4D12, max UDMA/100 ata2.00: configured for UDMA/100 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST9160411ASG DE13 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DU-8A2S 4D12 PQ: 0 ANSI: 5 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com Filesystem "dm-0": Disabling barriers, trial barrier write failed XFS mounting filesystem dm-0 Ending clean XFS mount for filesystem: dm-0 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/6x writer dvd-ram cd/rw xa/form2 cdda pop-up Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) ACPI: SSDT DD050999, 0281 (r1 PmRef BspIst 3000 INTL 20050624) ACPI: SSDT DD050DF1, 05C6 (r1 PmRef BspCst 3001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) Marking TSC unstable due to TSC halts in idle sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 e1000e 0000:00:19.0: setting latency timer to 64 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:70:ac:b0:8a 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 5, PHY: 8, PBA No: 1004ff-0ff rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (41 C) ACPI: AC Adapter [AC] (on-line) Yenta: CardBus bridge found at 0000:03:01.0 [1028:0233] ACPI: EC: non-query interrupt received, switching to interrupt mode Yenta: ISA IRQ mask 0x0cb8, PCI irq 19 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff pcmcia: parent PCI bridge Memory window: 0xf6800000 - 0xf68fffff pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff ohci1394 0000:03:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f68ff800-f68fffff] Max Packet=[2048] IR/IT contexts=[4/4] sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) input: Lid Switch as /class/input/input3 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input4 acpi device:37: registered as cooling_device1 input: Video Bus as /class/input/input5 ACPI: Power Button (CM) [PBTN] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SBTN] ACPI: WMI: Mapper loaded sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 21) sdhci-pci 0000:03:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA acpi device:3e: registered as cooling_device2 input: Video Bus as /class/input/input7 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) input: Video Bus as /class/input/input8 ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 usbcore: registered new interface driver hiddev input: HID 413c:8157 as /class/input/input9 input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1 input: HID 413c:8158 as /class/input/input10 input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks iwlagn: Copyright(c) 2003-2008 Intel Corporation iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:0c:00.0: setting latency timer to 64 iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=0x24 iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:0c:00.0: PCI INT A disabled phy0: Selected rate control algorithm 'iwl-agn-rs' HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 i8k: unable to get SMM BIOS version Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org) Non-volatile memory driver v1.2 loop: module loaded ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc0001aa6f870] kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Filesystem "dm-1": Disabling barriers, trial barrier write failed XFS mounting filesystem dm-1 Ending clean XFS mount for filesystem: dm-1 FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! fuse init (API version 7.9) Adding 2047992k swap on /dev/mapper/Linux-swap. Priority:-1 extents:1 across:2047992k vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 1 processor cores. vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 2.0.2_OSE (interface 0x00090000). NET: Registered protocol family 10 lo: Disabled Privacy Extensions Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. usb 3-1.2: usbfs: process 3611 (hid2hci) did not claim interface 0 before use virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. virbr0: starting userspace STP failed, starting kernel STP usb 3-1.3: new full speed USB device using uhci_hcd and address 5 usb 3-1.3: configuration #1 chosen from 1 choice usb 3-1.3: New USB device found, idVendor=413c, idProduct=8156 usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1.3: Product: Dell Wireless 370 Bluetooth Mini-card usb 3-1.3: Manufacturer: Dell Computer Corp ip_tables: (C) 2000-2006 Netfilter Core Team Bluetooth: Generic Bluetooth USB driver ver 0.3 usbcore: registered new interface driver btusb nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ADDRCONF(NETDEV_UP): eth0: link is not ready Bluetooth: HIDP (Human Interface Emulation) ver 1.2 iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) firmware: requesting iwlwifi-5000-1.ucode Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX ADDRCONF(NETDEV_UP): wlan0: link is not ready NET: Registered protocol family 17 Clocksource tsc unstable (delta = -255968219 ns) [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining set status page addr 0x02220000 usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd pcscd rqt 161 rq 3 len 1024 ret -110 usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd pcscd rqt 161 rq 3 len 1024 ret -110 virbr0: no IPv6 routers present wlan0: authenticate with AP 00:15:f2:0a:ab:43 wlan0: authenticate with AP 00:15:f2:0a:ab:43 wlan0: authenticate with AP 00:15:f2:0a:ab:43 wlan0: authenticated wlan0: associate with AP 00:15:f2:0a:ab:43 wlan0: RX AssocResp from 00:15:f2:0a:ab:43 (capab=0x431 status=0 aid=3) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd pcscd rqt 161 rq 3 len 1024 ret -110 usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd pcscd rqt 161 rq 3 len 1024 ret -110 usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd pcscd rqt 161 rq 3 len 1024 ret -110 usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd pcscd rqt 161 rq 3 len 1024 ret -110 usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd pcscd rqt 161 rq 3 len 1024 ret -110 usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd pcscd rqt 161 rq 3 len 1024 ret -110 usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd pcscd rqt 161 rq 3 len 1024 ret -110 usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd pcscd rqt 161 rq 3 len 1024 ret -110
Bus 002 Device 001: ID 1d6b:0002 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b idProduct 0x0002 bcdDevice 2.06 iManufacturer 3 Linux 2.6.27.3-1mdv ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:1d.7 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 6 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Port 6: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled
Bus 008 Device 001: ID 1d6b:0001 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b idProduct 0x0001 bcdDevice 2.06 iManufacturer 3 Linux 2.6.27.3-1mdv uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled
Bus 007 Device 001: ID 1d6b:0001 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b idProduct 0x0001 bcdDevice 2.06 iManufacturer 3 Linux 2.6.27.3-1mdv uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled
Bus 006 Device 001: ID 1d6b:0001 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b idProduct 0x0001 bcdDevice 2.06 iManufacturer 3 Linux 2.6.27.3-1mdv uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled
Bus 001 Device 001: ID 1d6b:0002 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b idProduct 0x0002 bcdDevice 2.06 iManufacturer 3 Linux 2.6.27.3-1mdv ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:1a.7 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 6 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Port 6: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled
Bus 005 Device 002: ID 0a5c:5800 Broadcom Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0a5c Broadcom Corp. idProduct 0x5800 bcdDevice 1.01 iManufacturer 1 Broadcom Corp iProduct 2 5880 iSerial 3 0123456789ABCD bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 139 bNumInterfaces 2 bConfigurationValue 0 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 254 Application Specific Interface bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 4 Broadcom USH ** UNRECOGNIZED: 10 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 11 Chip/SmartCard bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 5 Contacted SmartCard ChipCard Interface Descriptor: bLength 54 bDescriptorType 33 bcdCCID 1.00 nMaxSlotIndex 0 bVoltageSupport 7 5.0V 3.0V 1.8V dwProtocols 3 T=0 T=1 dwDefaultClock 4000 dwMaxiumumClock 4000 bNumClockSupported 0 dwDataRate 9600 bps dwMaxDataRate 250000 bps bNumDataRatesSupp. 0 dwMaxIFSD 247 dwSyncProtocols 00000000 dwMechanical 00000000 dwFeatures 000102BA Auto configuration based on ATR Auto voltage selection Auto clock change Auto baud rate change Auto PPS made by CCID NAD value other than 0x00 accpeted TPDU level exchange dwMaxCCIDMsgLen 271 bClassGetResponse 00 bClassEnvelope 00 wlcdLayout none bPINSupport 0 bMaxCCIDBusySlots 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 1 Device Status: 0x0000 (Bus Powered)
Bus 005 Device 001: ID 1d6b:0001 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b idProduct 0x0001 bcdDevice 2.06 iManufacturer 3 Linux 2.6.27.3-1mdv uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1a.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled
Bus 004 Device 001: ID 1d6b:0001 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b idProduct 0x0001 bcdDevice 2.06 iManufacturer 3 Linux 2.6.27.3-1mdv uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1a.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled
Bus 003 Device 005: ID 413c:8156 Dell Computer Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 224 Wireless bDeviceSubClass 1 Radio Frequency bDeviceProtocol 1 Bluetooth bMaxPacketSize0 64 idVendor 0x413c Dell Computer Corp. idProduct 0x8156 bcdDevice 4.56 iManufacturer 1 Dell Computer Corp iProduct 2 Dell Wireless 370 Bluetooth Mini-card iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 216 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0009 1x 9 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0009 1x 9 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 2 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0011 1x 17 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0011 1x 17 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 3 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 4 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 5 bNumEndpoints 2 bInterfaceClass 224 Wireless bInterfaceSubClass 1 Radio Frequency bInterfaceProtocol 1 Bluetooth iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 254 Application Specific Interface bInterfaceSubClass 1 Device Firmware Update bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 07 21 07 88 13 40 00 Device Status: 0x0001 Self Powered
Bus 003 Device 004: ID 413c:8158 Dell Computer Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x413c Dell Computer Corp. idProduct 0x8158 bcdDevice 1.00 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 62 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 113 Report Descriptor: (length is 113) Item(Global): Usage Page, data= [ 0x01 ] 1 Generic Desktop Controls Item(Local ): Usage, data= [ 0x02 ] 2 Mouse Item(Main ): Collection, data= [ 0x01 ] 1 Application Item(Global): Report ID, data= [ 0x02 ] 2 Item(Local ): Usage, data= [ 0x01 ] 1 Pointer Item(Main ): Collection, data= [ 0x00 ] 0 Physical Item(Global): Usage Page, data= [ 0x09 ] 9 Buttons Item(Local ): Usage Minimum, data= [ 0x01 ] 1 Button 1 (Primary) Item(Local ): Usage Maximum, data= [ 0x03 ] 3 Button 3 (Tertiary) Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0x01 ] 1 Item(Global): Report Size, data= [ 0x01 ] 1 Item(Global): Report Count, data= [ 0x03 ] 3 Item(Main ): Input, data= [ 0x02 ] 2 Data Variable Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Global): Report Count, data= [ 0x01 ] 1 Item(Global): Report Size, data= [ 0x05 ] 5 Item(Main ): Input, data= [ 0x01 ] 1 Constant Array Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Global): Usage Page, data= [ 0x01 ] 1 Generic Desktop Controls Item(Local ): Usage, data= [ 0x30 ] 48 Direction-X Item(Local ): Usage, data= [ 0x31 ] 49 Direction-Y Item(Global): Logical Minimum, data= [ 0x81 ] 129 Item(Global): Logical Maximum, data= [ 0x7f ] 127 Item(Global): Report Size, data= [ 0x08 ] 8 Item(Global): Report Count, data= [ 0x02 ] 2 Item(Main ): Input, data= [ 0x06 ] 6 Data Variable Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Main ): End Collection, data=none Item(Main ): End Collection, data=none Item(Global): Usage Page, data= [ 0x0c ] 12 Consumer Item(Local ): Usage, data= [ 0x01 ] 1 Consumer Control Item(Main ): Collection, data= [ 0x01 ] 1 Application Item(Global): Report ID, data= [ 0x7f ] 127 Item(Global): Usage Page, data= [ 0x00 0xff ] 65280 (null) Item(Global): Report Size, data= [ 0x08 ] 8 Item(Global): Report Count, data= [ 0x03 ] 3 Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Local ): Usage Minimum, data= [ 0x40 0xfc ] 64576 (null) Item(Local ): Usage Maximum, data= [ 0x42 0xfc ] 64578 (null) Item(Main ): Feature, data= [ 0x02 ] 2 Data Variable Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Global): Report ID, data= [ 0x7e ] 126 Item(Global): Report Count, data= [ 0x1b ] 27 Item(Local ): Usage Minimum, data= [ 0x44 0xfc ] 64580 (null) Item(Local ): Usage Maximum, data= [ 0x5e 0xfc ] 64606 (null) Item(Main ): Feature, data= [ 0x02 ] 2 Data Variable Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Global): Report ID, data= [ 0x7d ] 125 Item(Global): Report Size, data= [ 0x01 ] 1 Item(Global): Report Count, data= [ 0x0a ] 10 Item(Global): Logical Maximum, data= [ 0x01 ] 1 Item(Local ): Usage Minimum, data= [ 0x5f 0xfc ] 64607 (null) Item(Local ): Usage Maximum, data= [ 0x68 0xfc ] 64616 (null) Item(Main ): Input, data= [ 0x02 ] 2 Data Variable Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Global): Report Count, data= [ 0x06 ] 6 Item(Main ): Input, data= [ 0x01 ] 1 Constant Array Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Main ): End Collection, data=none Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 10 ** UNRECOGNIZED: 1c ff 42 49 53 54 00 01 03 08 05 00 00 00 00 00 01 09 f4 01 02 0a f4 01 03 0b f4 01 Device Status: 0x0001 Self Powered
Bus 003 Device 003: ID 413c:8157 Dell Computer Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x413c Dell Computer Corp. idProduct 0x8157 bcdDevice 1.00 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 56 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0001 Self Powered
Bus 003 Device 002: ID 0a5c:4500 Broadcom Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 8 idVendor 0x0a5c Broadcom Corp. idProduct 0x4500 bcdDevice 1.00 iManufacturer 1 Broadcom iProduct 2 BCM2046B1 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 94mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 3 wHubCharacteristic 0x0004 Ganged power switching Compound device Ganged overcurrent protection bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x0e PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Device Status: 0x0001 Self Powered
Bus 003 Device 001: ID 1d6b:0001 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b idProduct 0x0001 bcdDevice 2.06 iManufacturer 3 Linux 2.6.27.3-1mdv uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1a.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled
| |