Messages in this thread | | | Date | Thu, 17 Jan 2008 14:53:06 -0800 | From | Jeremy Fitzhardinge <> | Subject | x86: Debug warning: early ioremap leak of 2 areas detected. |
| |
I got this when doing a test boot of a current x86 kernel under kvm.
(qemu) Linux version 2.6.24-rc8 (jeremy@ezr) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1877 SMP PREEMPT Thu Jan 17 14:30:30 PST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 0000000030000000 (ACPI data) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 767MB LOWMEM available. Scan SMP from ffd00000 [00000000] for 1024 bytes. Scan SMP from ffd00c00 [0009fc00] for 1024 bytes. Scan SMP from ffd00000 [000f0000] for 65536 bytes. Scan SMP from ffd00c00 [0009fc00] for 1024 bytes. NX (Execute Disable) protection: active Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 196592 HighMem 196592 -> 196592 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 196592 DMI not present or invalid. ACPI: RSDP 000FAE40, 0014 (r0 QEMU ) ACPI: RSDT 2FFF0000, 002C (r1 QEMU QEMURSDT 1 QEMU 1) ACPI: FACP 2FFF002C, 0074 (r2 QEMU QEMUFACP 1 QEMU 1) ACPI: DSDT 2FFF0100, 0909 (r1 BXPC BXDSDT 1 INTL 20061109) ACPI: FACS 2FFF00C0, 0040 ACPI: APIC 2FFF0A10, 0040 (r1 QEMU QEMUAPIC 1 QEMU 1) ACPI: no DMI BIOS year, acpi=force is required to enable ACPI ACPI: Disabling ACPI support Allocating PCI resources starting at 40000000 (gap: 30000000:cffc0000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000 swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195057 Kernel command line: console=ttyS0 root=/dev/sda1 early_ioremap_debug Found and enabled local APIC! Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1828.783 MHz processor. Console: colour VGA+ 80x25 console [ttyS0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 774124k/786368k available (2829k kernel code, 11688k reserved, 1066k data, 268k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff80000 - 0xfffff000 ( 508 kB) pkmap : 0xffa00000 - 0xffc00000 (2048 kB) vmalloc : 0xf0800000 - 0xff9fe000 ( 241 MB) lowmem : 0xc0000000 - 0xefff0000 ( 767 MB) .init : 0xc04d4000 - 0xc0517000 ( 268 kB) .data : 0xc03c3669 - 0xc04cdff8 (1066 kB) .text : 0xc0100000 - 0xc03c3669 (2829 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Prune to be done here. max_low_pfn 196592 SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 3700.98 BogoMIPS (lpj=7401964) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. x86 PAT enabled: cpu 0, old 0x0, new 0x1040600010406 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 15k freed CPU0: AMD QEMU Virtual CPU version 0.9.0 stepping 03 SMP motherboard not detected. Brought up 1 CPUs net_namespace: 64 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread EF820000 could not acquire Mutex [1] [20070126] No dock devices found. ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread EF820000 could not acquire Mutex [1] [20070126] PCI: PCI BIOS revision 2.10 entry at 0xfa8b0, last bus=0 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources PCI quirk: region b000-b03f claimed by PIIX4 ACPI PCI quirk: region b100-b10f claimed by PIIX4 SMB PCI: Using IRQ router PIIX/ICH [8086/7000] at 0000:00:01.0 Time: tsc clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. Total HugeTLB memory allocated, 0 SGI XFS with no debug enabled Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. PCI: PIIX3: Enabling Passive Release on 0000:00:01.0 Activating ISA DMA hang workarounds. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread EF820000 could not acquire Mutex [1] [20070126] ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread EF820000 could not acquire Mutex [1] [20070126] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed pciehp: PCI Express Hot Plug Controller Driver version: 0.4 early_ioremap(2fff0a10, 00000040) [1] => Pid: 1, comm: swapper Not tainted 2.6.24-rc8 #1877 [<c04e3913>] early_ioremap+0x49/0x157 [<c0117057>] __acpi_map_table+0x2f/0x31 [<c0279459>] acpi_os_map_memory+0x1a/0x1c [<c028b4fc>] acpi_tb_verify_table+0x20/0x4d [<c028acea>] acpi_get_table+0x4a/0x91 [<c04ec303>] acpi_processor_init+0x35/0xcf [<c04d44b8>] kernel_init+0x14f/0x2a5 [<c0107c12>] ? ret_from_fork+0x6/0x1c [<c04d4369>] ? kernel_init+0x0/0x2a5 [<c04d4369>] ? kernel_init+0x0/0x2a5 [<c01089f3>] kernel_thread_helper+0x7/0x10 ======================= 00000a10 + ffd40000 Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize pcnet32.c:v1.34 14.Aug.2007 tsbogend@alpha.franken.de PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered 8139too Fast Ethernet driver 0.9.28 8139too 0000:00:03.0: This (id 10ec:8139 rev 20) is an enhanced 8139C+ chip 8139too 0000:00:03.0: Use the "8139cp" driver for improved performance and stability. PCI: Found IRQ 11 for device 0000:00:03.0 eth0: RealTek RTL8139 at 0xd000, 52:54:00:12:34:56, IRQ 11 Driver 'sd' needs updating - please use bus_type methods scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14 ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15 ata1.00: ATA-7: QEMU HARDDISK, 0.9.0, max UDMA/100 ata1.00: 8388608 sectors, multi 16: LBA48 ata1.00: configured for MWDMA2 ata2.00: ATAPI: QEMU CD-ROM, 0.9.0, max UDMA/100 ata2.00: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.9. PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 8388608 512-byte hardware sectors (4295 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 8388608 512-byte hardware sectors (4295 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM QEMU QEMU CD-ROM 0.9. PQ: 0 ANSI: 5 usbmon: debugfs is not available usbcore: registered new interface driver libusual PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid /home/jeremy/hg/xen/paravirt/linux/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Debug warning: early ioremap leak of 2 areas detected. please boot with early_ioremap_debug and report the dmesg. ------------[ cut here ]------------ WARNING: at /home/jeremy/hg/xen/paravirt/linux/arch/x86/mm/ioremap_32.c:346 check_early_ioremap_leak+0x33/0x3d() Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.24-rc8 #1877 [<c01284f4>] warn_on_slowpath+0x41/0x51 [<c0128a7c>] ? __call_console_drivers+0x4e/0x5a [<c03c23ba>] ? _spin_lock_irqsave+0x27/0x41 [<c03c26e9>] ? _spin_unlock_irqrestore+0x1b/0x2f [<c0128cb4>] ? release_console_sem+0x1a0/0x1a8 [<c01290d3>] ? vprintk+0x2a0/0x2ee [<c01290d3>] ? vprintk+0x2a0/0x2ee [<c024848b>] ? __next_cpu+0x15/0x25 [<c03c23ba>] ? _spin_lock_irqsave+0x27/0x41 [<c031cbe7>] ? unlock_policy_rwsem_write+0x2c/0x2e [<c031cc21>] ? __cpufreq_remove_dev+0x38/0x19a [<c0129136>] ? printk+0x15/0x17 [<c04e36dc>] check_early_ioremap_leak+0x33/0x3d [<c04d44b8>] kernel_init+0x14f/0x2a5 [<c0107c12>] ? ret_from_fork+0x6/0x1c [<c04d4369>] ? kernel_init+0x0/0x2a5 [<c04d4369>] ? kernel_init+0x0/0x2a5 [<c01089f3>] kernel_thread_helper+0x7/0x10 ======================= ---[ end trace fbb24127d6bef602 ]--- Using IPI No-Shortcut mode registered taskstats version 1 input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 268k freed
| |