lkml.org 
[lkml]   [2007]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] ahci: enable GHC.AE bit before set GHC.HR
According to the description of section 5.2.2.1 and 10.1.2 of AHCI specification rev1_1/rev1_2, GHC.HR shall only be set to ¡®1¡¯
by software when GHC.AE is set to ¡®1¡¯.

Signed-off-by: Peer Chen <peerchen@gmail.com>
---
--- linux-2.6.23-rc7/drivers/ata/ahci.c.orig 2007-09-20 11:01:55.000000000 -0400
+++ linux-2.6.23-rc7/drivers/ata/ahci.c 2007-09-20 11:07:31.000000000 -0400
@@ -834,6 +834,10 @@ static int ahci_reset_controller(struct
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
u32 tmp;

+ /* turn on AHCI mode before controller reset*/
+ writel(HOST_AHCI_EN, mmio + HOST_CTL);
+ (void) readl(mmio + HOST_CTL); /* flush */
+
/* global controller reset */
tmp = readl(mmio + HOST_CTL);
if ((tmp & HOST_RESET) == 0) {
-
--------------
Peer Chen
2007-09-21
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-09-21 07:33    [W:0.056 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site