Messages in this thread | | | From | "Harsha" <> | Subject | ethernet driver: hard_start_xmit | Date | Thu, 30 Aug 2007 04:24:53 -0700 |
| |
Hi,
I have written a network device driver (Linux kernel: 2.6.20.1) on ARM based target board. I have implemented ether_tx, which is called whenever hard_start_xmit is called.
-------------------------------------- [ PINGing from BOARD TO OTHER HOST ]
The network driver is working. I am able to ping to other hosts and i am able to get the reply without any problem
Q1. For large packet size say (2048, 4096) after sometime ping exits saying "sendto: buffer space unavailable"
--------------------------------------- [ PINGing from other HOST to BOARD ]
ping works but only for some time. It stops working by saying "Request timed out" after some successful pinging. The number of times ping succeeds depend on the packet size
Packet size = 64, ping stops working exactly after 449 times Packet size = 4096, ping stops working exactly after 28 times.
I did some digging and found that when ping stops working, ether_tx(or hard_start_xmit) is not called at all. Though the packets are recieved correctly by ether_rx. After ping stops, any more ping of any packet size does not work. Also i found that at this stage if i ping from board to host it works.
Q2. What might be the reason for ping to stop?
Regards harsha
-- Harsha hlforums@fmguy.com
-- http://www.fastmail.fm - Accessible with your email software or over the web
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |