lkml.org 
[lkml]   [2007]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.22.5 SATA Failure
Dong Feng wrote:
> I have been using 2.6.21.1. It seems working well, that is, all my
> disk partitions are mapped as "/dev/sda*" and the performance looks
> good. After I upgrade to 2.6.22.5 with the exact same configuration,
> all the disk device turn to "/dev/hda*" and the performance degrade
> obviously.
>
> While I boot with 2.6.21.1, the logs regarding disk are:
>
> Aug 26 06:11:26 localhost kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
> Aug 26 06:11:26 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[B]
> -> GSI 17 (level, low) -> IRQ 17
> Aug 26 06:11:26 localhost kernel: ata: 0x170 IDE port busy
> Aug 26 06:11:26 localhost kernel: ata: conflict with ide1
> Aug 26 06:11:26 localhost kernel: ata1: SATA max UDMA/133 cmd
> 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
> Aug 26 06:11:26 localhost kernel: ata2: DUMMY
> Aug 26 06:11:26 localhost kernel: scsi0 : ata_piix
> Aug 26 06:11:26 localhost kernel: ata1.00: ATA-7: ST9120821AS, 8.03,
> max UDMA/133
> Aug 26 06:11:26 localhost kernel: ata1.00: 234441648 sectors, multi 8:
> LBA48 NCQ (depth 0/32)
> Aug 26 06:11:26 localhost kernel: ata1.00: configured for UDMA/133
> Aug 26 06:11:26 localhost kernel: scsi1 : ata_piix
> Aug 26 06:11:26 localhost kernel: scsi 0:0:0:0: Direct-Access ATA
> ST9120821AS 8.03 PQ: 0 ANSI: 5
> Aug 26 06:11:26 localhost kernel: SCSI device sda: 234441648 512-byte
> hdwr sectors (120034 MB)
> Aug 26 06:11:26 localhost kernel: sda: Write Protect is off
> Aug 26 06:11:26 localhost kernel: SCSI device sda: write cache:
> enabled, read cache: enabled, doesn't support DPO or FUA
> Aug 26 06:11:26 localhost kernel: SCSI device sda: 234441648 512-byte
> hdwr sectors (120034 MB)
> Aug 26 06:11:26 localhost kernel: sda: Write Protect is off
> Aug 26 06:11:26 localhost kernel: SCSI device sda: write cache:
> enabled, read cache: enabled, doesn't support DPO or FUA
> Aug 26 06:11:26 localhost kernel: sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
>
>
>
> While booting with 2.6.22.5, the logs are:
>
> Aug 26 09:30:04 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[B]
> -> GSI 17 (level, low) -> IRQ 17
> Aug 26 09:30:04 localhost kernel: ata_piix 0000:00:1f.2: 0x1F0 IDE port busy
> Aug 26 09:30:04 localhost kernel: ata_piix 0000:00:1f.2: 0x170 IDE port busy
> Aug 26 09:30:04 localhost kernel: ata_piix 0000:00:1f.2: no available
> legacy port
>
>
>
> It seems the dramatic change in libata.c incurs this failure.

It looks like you have some CONFIG_IDE options enabled in your kernel
configuration that result in drivers/ide trying to drive part or all of
that controller, preventing libata from doing so. Likely the easiest
thing to do is just set CONFIG_IDE=n entirely..

--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-08-26 06:31    [W:0.028 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site