lkml.org 
[lkml]   [2007]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [git patches] libata fixes
On Wed, 27 Jun 2007 03:35:26 -0400, Jeff Garzik wrote:
>Tejun Heo (9):
> libata: kill the infamous abnormal status message
> libata: kill non-sense warning message
> libata: be less verbose about hpa
> libata: remove unused variable from ata_eh_reset()
> libata: fix ata_dev_disable()
> libata: fix infinite EH waiting bug
> libata: call ata_check_atapi_dma() with qc better prepared
> libata: use PIO for non-16 byte aligned ATAPI commands
> libata: kill ATA_HORKAGE_DMA_RW_ONLY

These changes fixed the CDROM IDENTIFY failures one of
my older test machines used to get with libata. I now
get much nicer results on that machine:

ata_piix 0000:00:1f.1: version 2.11
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
ata1.00: ATA-5: IC35L080AVVA07-0, VA4OA52A, max UDMA/100
ata1.00: 160836480 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
ata2.00: ATAPI: CRD-8320B, 1.12, max MWDMA2
ata2.01: ATAPI: Hewlett-Packard CD-Writer Plus 9100, 1.0c, max UDMA/33
ata2.00: configured for MWDMA2
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA IC35L080AVVA07-0 VA4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM GoldStar CD-ROM CRD-8320B 1.12 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM HP CD-Writer+ 9100 1.0c PQ: 0 ANSI: 5

It's the CRD-8320B that used to time out and fail IDENTIFY.

Tested-by: Mikael Pettersson <mikpe@it.uu.se>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-06-28 16:31    [W:0.034 / U:0.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site