Messages in this thread | | | Date | Sun, 24 Jun 2007 20:49:05 +0200 | From | otto Meier <> | Subject | sata_promise disk error 2.6.22-rc5 with hrt1 patch |
| |
Hello,
I got the following in my logs:
Jun 24 19:06:40 gate2 kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jun 24 19:06:40 gate2 kernel: ata4.00: (port_status 0x00001000) Jun 24 19:06:40 gate2 kernel: ata4.00: cmd 35/00:00:c1:17:92/00:04:17:00:00/e0 tag 0 cdb 0x0 data 524288 out Jun 24 19:06:40 gate2 kernel: res 50/00:00:c0:1b:92/00:00:17:00:00/e0 Emask 0x20 (host bus error) Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 Jun 24 19:06:40 gate2 kernel: ata4.00: configured for UDMA/133 Jun 24 19:06:40 gate2 kernel: ata4: EH complete Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB) Jun 24 19:06:40 gate2 kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jun 24 19:06:40 gate2 kernel: ata4.00: (port_status 0x00001000) Jun 24 19:06:40 gate2 kernel: ata4.00: cmd 25/00:00:c1:15:92/00:02:17:00:00/e0 tag 0 cdb 0x0 data 262144 in Jun 24 19:06:40 gate2 kernel: res 50/00:00:c0:17:92/00:00:17:00:00/e0 Emask 0x20 (host bus error) Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 Jun 24 19:06:40 gate2 kernel: ata4.00: configured for UDMA/133 Jun 24 19:06:40 gate2 kernel: ata4: EH complete Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write Protect is off Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB) Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write Protect is off Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
The system continued without seeing other effects.
It is runnuning a 2.6.22-rc5 kernel with hrt1 patch. The drive ist part of a raid5 with 4 identical drives
lspci -vvv gives:
02:06.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA 300 TX4) (rev 02) Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at bc00 [size=128] Region 2: I/O ports at b800 [size=256] Region 3: Memory at fdeff000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at fdec0000 (32-bit, non-prefetchable) [size=128K] [virtual] Expansion ROM at fdda0000 [disabled] [size=32K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Has anyone an idea whats going on?
Best regards
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |