Messages in this thread | | | Date | Wed, 16 May 2007 19:37:25 +0200 | From | Maciej Rutecki <> | Subject | Re: 2.6.22-rc1-mm1 [cannot change thermal trip points] |
| |
In 2.6.20.9 I can change trippoints:
echo "105:100:100:78:70:40:30" > /proc/acpi/thermal_zone/TZ0/trip_points echo 10 > /proc/acpi/thermal_zone/TZ0/polling_frequency
Then I got: cat /proc/acpi/thermal_zone/TZ0/* <setting not supported> cooling mode: active polling frequency: 10 seconds state: active[2] temperature: 45 C critical (S5): 105 C active[0]: 78 C: devices=0xdf415a40 active[1]: 70 C: devices=0xdf4159dc active[2]: 40 C: devices=0xdf41598c active[3]: 30 C: devices=0xdf41593c
cat /proc/acpi/fan/*/* status: off status: off status: on status: on
And fan turns on.
In 2.6.22-rc1-mm1: echo "105:100:100:78:70:40:30" > /proc/acpi/thermal_zone/TZ0/trip_points bash: echo: write error: BĹÄ
d wejĹcia/wyjĹcia (input/output error)
rutek:/home/maciek# cat /proc/acpi/thermal_zone/TZ0/* <setting not supported> polling frequency: 10 seconds state: ok temperature: 45 C critical (S5): 256 C active[0]: 78 C: devices=0xc1827a40 active[1]: 70 C: devices=0xc18279dc active[2]: 60 C: devices=0xc182798c active[3]: 50 C: devices=0xc182793c rutek:/home/maciek# cat /proc/acpi/fan/*/* status: off status: off status: off status: off
Fan turns on when temperature is over 50*C. (want: 30)
A read this: http://article.gmane.org/gmane.linux.acpi.devel/22750
But I don't have colling_policy, but only colling_mode: ls /proc/acpi/thermal_zone/TZ0/ cooling_mode polling_frequency state temperature trip_points
Its bug or feature?
Config, acpidump, dmesg: http://www.unixy.pl/maciek/download/kernel/2.6.22-rc1-mm1/
-- Maciej Rutecki www.unixy.pl Kernel Monkeys (http://kernel.wikidot.com/)
[unhandled content-type:application/x-pkcs7-signature] | |