lkml.org 
[lkml]   [2007]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] include/asm-mips/: Spelling fixes
Date

Signed-off-by: Joe Perches <joe@perches.com>
---
include/asm-mips/mach-excite/excite_fpga.h | 2 +-
include/asm-mips/mach-wrppmc/mach-gt64120.h | 2 +-
include/asm-mips/sgi/ip22.h | 2 +-
include/asm-mips/sn/sn0/hubio.h | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/include/asm-mips/mach-excite/excite_fpga.h b/include/asm-mips/mach-excite/excite_fpga.h
index 38fcda7..0a1ef69 100644
--- a/include/asm-mips/mach-excite/excite_fpga.h
+++ b/include/asm-mips/mach-excite/excite_fpga.h
@@ -3,7 +3,7 @@


/**
- * Adress alignment of the individual FPGA bytes.
+ * Address alignment of the individual FPGA bytes.
* The address arrangement of the individual bytes of the FPGA is two
* byte aligned at the embedded MK2 platform.
*/
diff --git a/include/asm-mips/mach-wrppmc/mach-gt64120.h b/include/asm-mips/mach-wrppmc/mach-gt64120.h
index 00d8bf6..465234a 100644
--- a/include/asm-mips/mach-wrppmc/mach-gt64120.h
+++ b/include/asm-mips/mach-wrppmc/mach-gt64120.h
@@ -45,7 +45,7 @@
#define GT_PCI_IO_SIZE 0x02000000UL

/*
- * PCI interrupts will come in on either the INTA or INTD interrups lines,
+ * PCI interrupts will come in on either the INTA or INTD interrupts lines,
* which are mapped to the #2 and #5 interrupt pins of the MIPS. On our
* boards, they all either come in on IntD or they all come in on IntA, they
* aren't mixed. There can be numerous PCI interrupts, so we keep a list of the
diff --git a/include/asm-mips/sgi/ip22.h b/include/asm-mips/sgi/ip22.h
index f4981c4..c0501f9 100644
--- a/include/asm-mips/sgi/ip22.h
+++ b/include/asm-mips/sgi/ip22.h
@@ -15,7 +15,7 @@
/*
* These are the virtual IRQ numbers, we divide all IRQ's into
* 'spaces', the 'space' determines where and how to enable/disable
- * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrups
+ * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrupts
* are not supported this way. Driver is supposed to allocate HPC/MC
* interrupt as shareable and then look to proper status bit (see
* HAL2 driver). This will prevent many complications, trust me ;-)
diff --git a/include/asm-mips/sn/sn0/hubio.h b/include/asm-mips/sn/sn0/hubio.h
index ef91b33..0187895 100644
--- a/include/asm-mips/sn/sn0/hubio.h
+++ b/include/asm-mips/sn/sn0/hubio.h
@@ -338,7 +338,7 @@ typedef union io_perf_cnt {
#define IIO_IFDR 0x400398 /* IOQ FIFO Depth */
#define IIO_IIAP 0x4003a0 /* IIQ Arbitration Parameters */
#define IIO_IMMR IIO_IIAP
-#define IIO_ICMR 0x4003a8 /* CRB Managment Register */
+#define IIO_ICMR 0x4003a8 /* CRB Management Register */
#define IIO_ICCR 0x4003b0 /* CRB Control Register */
#define IIO_ICTO 0x4003b8 /* CRB Time Out Register */
#define IIO_ICTP 0x4003c0 /* CRB Time Out Prescalar */
--
1.5.3.7.949.g2221a6


\
 
 \ /
  Last update: 2007-12-17 20:39    [W:0.130 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site