lkml.org 
[lkml]   [2007]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Add the infamous Huawei E220 to option.c
From
I'll give it a go later today, still on 2.6.22.4.

Any logs of interest except for obvious behavior?

On Thu, 29 Nov 2007 15:05:50 +0100
Johann Wilhelm <johann.wilhelm@student.tugraz.at> wrote:

> If everything's working please also add code to also support the other
> E220 device... so both PID 0x1003 and 0x1004 should be treaded the
> same way...
>
> to test the device with the 0x1004-PID maybe Jaime Velasco
> <jsagarribay@gmail.com> could be asked.. he initialy added the lines
> for this device in option.c
>
> 73
>
> Zitat von Oliver Neukum <oliver@neukum.org>:
>
> > Am Donnerstag 29 November 2007 schrieb Rui Santos:
> >> >> Just to remember that that specific flag was one SET and, was removed,
> >> >> in part, because of what I state. Of course we aim at perfection but, if
> >> >> the benefits are only for a few situations and, will cause all this
> >> >> problems for all other, perhaps the reinsert of that flag would be a
> >> >> positive action.
> >> >>
> >> >
> >> > OK, can you provide "lsusb -v" for the device in the CD mode and in
> >> > the modem mode?
> >> >
> >> Of course. Heri it is.
> >
> > Thanks. Please try this patch.
> >
> > Regards
> > Oliver
> >
> > ----
> >
> > --- a/drivers/usb/serial/option.c 2007-11-29 12:35:09.000000000 +0100
> > +++ b/drivers/usb/serial/option.c 2007-11-29 12:47:34.000000000 +0100
> > @@ -158,7 +158,7 @@ static struct usb_device_id option_ids[]
> > { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
> > { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
> > { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
> > - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
> > + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID,
> > HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
> > { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS) },
> > { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1100) }, /* Novatel
> > Merlin XS620/S640 */
> > { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1110) }, /* Novatel
> > Merlin S620 */
> >
> >
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-11-29 15:39    [W:0.081 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site