Messages in this thread Patches in this message | | | Date | Mon, 26 Nov 2007 15:00:12 +0100 | From | Loic Grenie <> | Subject | [RFC PATCH] Make arch/x86/Makefile_{32,64} more similar |
| |
This is a patch to improve the similarity between arch/x86/Makefile_32 and arch/x86/Makefile_64. The remaining differences between both makefiles are nearly trivial and it is probably possible to collapse most of them in arch/x86/Makefile, leaving only a few assignements in arch/x86/Makefile_??.
Some observations:
- I have added UTS_MACHINE (I don't know if it's needed or correct) and used it. - I have modified two orders: in Makefile_32, core-y has two directory names inverted in Makefile_64, I've inverted init_task.o and head64.o In addition the order of elements in the PHONY variable has been modified. - I think my modifications for zlilo, zImage, compressed and zdisk targets are correct, but it may be a good idea to check. - I've added a variable stackreg and used it to define cflags-y and KBUILD_AFLAGS, I'd like a Makefile-guru to check what I've written. - Some of the remaining differences between both Makefile's look strange, maybe a little cleanup is needed.
I attach a diff between the patched Makefile's.
Kindly,
Loïc Grenié
Signed-off-by: Loïc Grenié <loic.grenie@gmail.com> --- arch/x86/Makefile_32 | 66 +++++++++++++++++++++++++++---------------------- arch/x86/Makefile_64 | 49 +++++++++++++++++++----------------- 2 files changed, 62 insertions(+), 53 deletions(-)
diff --git a/arch/x86/Makefile_32 b/arch/x86/Makefile_32 index 50394da..e11c123 100644 --- a/arch/x86/Makefile_32 +++ b/arch/x86/Makefile_32 @@ -3,7 +3,8 @@ # # This file is included by the global makefile so that you can add your own # architecture-specific flags and dependencies. Remember to do have actions -# for "archclean" cleaning up for this architecture. +# for "archclean" and "archdep" for cleaning up and making dependencies for +# this architecture # # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive @@ -22,6 +23,7 @@ # e.g.: obj-y += foo_$(BITS).o BITS := 32 export BITS +UTS_MACHINE := i386 HAS_BIARCH := $(call cc-option-yn, -m32) ifeq ($(HAS_BIARCH),y) @@ -30,12 +32,12 @@ LD := $(LD) -m elf_i386 CC := $(CC) -m32 endif -LDFLAGS := -m elf_i386 +LDFLAGS := -m elf_$(UTS_MACHINE) OBJCOPYFLAGS := -O binary -R .note -R .comment -S ifdef CONFIG_RELOCATABLE LDFLAGS_vmlinux := --emit-relocs endif -CHECKFLAGS += -D__i386__ +CHECKFLAGS += -D__$(UTS_MACHINE)__ KBUILD_CFLAGS += -pipe -msoft-float -mregparm=3 -freg-struct-return @@ -57,15 +59,14 @@ cflags-y += -maccumulate-outgoing-args KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;) # do binutils support CFI? -cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) -KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +stackreg=esp +cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(stackreg)${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(stackreg)${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) # is .cfi_signal_frame supported too? cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) -KBUILD_CFLAGS += $(cflags-y) - # Default subarch .c files mcore-y := arch/x86/mach-default @@ -108,13 +109,18 @@ core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/ # default subarch .h files mflags-y += -Iinclude/asm-x86/mach-default -head-y := arch/x86/kernel/head_32.o arch/x86/kernel/init_task.o +KBUILD_CFLAGS += $(cflags-y) +KBUILD_CFLAGS += $(mflags-y) +KBUILD_AFLAGS += $(mflags-y) + +head-y := arch/x86/kernel/head_$(BITS).o arch/x86/kernel/init_task.o \ + libs-y += arch/x86/lib/ core-y += arch/x86/kernel/ \ arch/x86/mm/ \ - $(mcore-y)/ \ - arch/x86/crypto/ + arch/x86/crypto/ \ + $(mcore-y)/ drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/ drivers-$(CONFIG_PCI) += arch/x86/pci/ # must be linked after kernel/ @@ -122,45 +128,45 @@ drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/ drivers-$(CONFIG_PM) += arch/x86/power/ drivers-$(CONFIG_FB) += arch/x86/video/ -KBUILD_CFLAGS += $(mflags-y) -KBUILD_AFLAGS += $(mflags-y) - boot := arch/x86/boot -PHONY += zImage bzImage compressed zlilo bzlilo \ - zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install +PHONY += bzImage bzlilo install fdimage fdimage144 fdimage288 isoimage \ + zImage compressed zlilo zdisk bzdisk +#Default target when executing "make" all: bzImage # KBUILD_IMAGE specify target image being built - KBUILD_IMAGE := $(boot)/bzImage -zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage +KBUILD_IMAGE := $(boot)/bzImage +zImage zlilo zdisk: KBUILD_IMAGE := $(boot)/zImage -zImage bzImage: vmlinux +bzImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE) - $(Q)mkdir -p $(objtree)/arch/i386/boot - $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/i386/boot/bzImage + $(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot + $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage -compressed: zImage +compressed zImage: bzImage -zlilo bzlilo: vmlinux +bzlilo: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo -zdisk bzdisk: vmlinux +bzdisk: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk +zdisk: bzdisk + fdimage fdimage144 fdimage288 isoimage: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@ install: - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install + $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@ archclean: - $(Q)rm -rf $(objtree)/arch/i386/boot - $(Q)$(MAKE) $(clean)=arch/x86/boot + $(Q)rm -rf $(objtree)/arch/$(UTS_MACHINE)/boot + $(Q)$(MAKE) $(clean)=$(boot) define archhelp - echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' + echo '* bzImage - Compressed kernel image ($(boot)/bzImage)' echo ' install - Install kernel using' echo ' (your) ~/bin/installkernel or' echo ' (distribution) /sbin/installkernel or' @@ -170,6 +176,6 @@ define archhelp echo ' isoimage - Create a boot CD-ROM image' endef -CLEAN_FILES += arch/x86/boot/fdimage \ - arch/x86/boot/image.iso \ - arch/x86/boot/mtools.conf +CLEAN_FILES += $(boot)/fdimage \ + $(boot)/image.iso \ + $(boot)/mtools.conf diff --git a/arch/x86/Makefile_64 b/arch/x86/Makefile_64 index a804860..4b137ba 100644 --- a/arch/x86/Makefile_64 +++ b/arch/x86/Makefile_64 @@ -26,11 +26,13 @@ # e.g.: obj-y += foo_$(BITS).o BITS := 64 export BITS +UTS_MACHINE := x86_64 -LDFLAGS := -m elf_x86_64 +LDFLAGS := -m elf_$(UTS_MACHINE) OBJCOPYFLAGS := -O binary -R .note -R .comment -S LDFLAGS_vmlinux := -CHECKFLAGS += -D__x86_64__ -m64 +CHECKFLAGS += -D__$(UTS_MACHINE)__ +CHECKFLAGS += -m64 cflags-y := cflags-kernel-y := @@ -63,8 +65,9 @@ cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,) cflags-y += -maccumulate-outgoing-args # do binutils support CFI? -cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) -KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +stackreg=rsp +cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(stackreg)${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(stackreg)${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) # is .cfi_signal_frame supported too? cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) @@ -77,7 +80,8 @@ KBUILD_CFLAGS += $(cflags-y) CFLAGS_KERNEL += $(cflags-kernel-y) KBUILD_AFLAGS += -m64 -head-y := arch/x86/kernel/head_64.o arch/x86/kernel/head64.o arch/x86/kernel/init_task.o +head-y := arch/x86/kernel/head_$(BITS).o arch/x86/kernel/init_task.o \ + arch/x86/kernel/head64.o libs-y += arch/x86/lib/ core-y += arch/x86/kernel/ \ @@ -86,35 +90,36 @@ core-y += arch/x86/kernel/ \ arch/x86/vdso/ core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/ drivers-$(CONFIG_PCI) += arch/x86/pci/ +# must be linked after kernel/ drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/ boot := arch/x86/boot -PHONY += bzImage bzlilo install archmrproper \ - fdimage fdimage144 fdimage288 isoimage archclean +PHONY += bzImage bzlilo install fdimage fdimage144 fdimage288 isoimage \ + archclean archmrproper #Default target when executing "make" all: bzImage -BOOTIMAGE := arch/x86/boot/bzImage -KBUILD_IMAGE := $(BOOTIMAGE) +# KBUILD_IMAGE specify target image being built +KBUILD_IMAGE := $(boot)/bzImage bzImage: vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(BOOTIMAGE) - $(Q)mkdir -p $(objtree)/arch/x86_64/boot - $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/x86_64/boot/bzImage + $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE) + $(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot + $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage bzlilo: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zlilo + $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo bzdisk: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zdisk + $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk fdimage fdimage144 fdimage288 isoimage: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ + $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@ install: vdso_install - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ + $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@ vdso_install: ifeq ($(CONFIG_IA32_EMULATION),y) @@ -123,11 +128,11 @@ endif $(Q)$(MAKE) $(build)=arch/x86/vdso $@ archclean: - $(Q)rm -rf $(objtree)/arch/x86_64/boot + $(Q)rm -rf $(objtree)/arch/$(UTS_MACHINE)/boot $(Q)$(MAKE) $(clean)=$(boot) define archhelp - echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' + echo '* bzImage - Compressed kernel image ($(boot)/bzImage)' echo ' install - Install kernel using' echo ' (your) ~/bin/installkernel or' echo ' (distribution) /sbin/installkernel or' @@ -137,8 +142,6 @@ define archhelp echo ' isoimage - Create a boot CD-ROM image' endef -CLEAN_FILES += arch/x86/boot/fdimage \ - arch/x86/boot/image.iso \ - arch/x86/boot/mtools.conf - - +CLEAN_FILES += $(boot)/fdimage \ + $(boot)/image.iso \ + $(boot)/mtools.conf -- 1.5.3.4diff -u a/arch/x86/Makefile_32 b/arch/x86/Makefile_64 --- a/arch/x86/Makefile_32 2007-11-23 13:05:13.000000000 +0100 +++ b/arch/x86/Makefile_64 2007-11-23 13:05:13.000000000 +0100 @@ -1,5 +1,5 @@ # -# i386 Makefile +# x86_64 Makefile # # This file is included by the global makefile so that you can add your own # architecture-specific flags and dependencies. Remember to do have actions @@ -14,52 +14,58 @@ # # 19990713 Artur Skawina <skawina@geocities.com> # Added '-march' and '-mpreferred-stack-boundary' support +# 20000913 Pavel Machek <pavel@suse.cz> +# Converted for x86_64 architecture +# 20010105 Andi Kleen, add IA32 compiler. +# ....and later removed it again.... # -# 20050320 Kianusch Sayah Karadji <kianusch@sk-tech.net> -# Added support for GEODE CPU +# $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $ # BITS is used as extension for files which are available in a 32 bit # and a 64 bit version to simplify shared Makefiles. # e.g.: obj-y += foo_$(BITS).o -BITS := 32 +BITS := 64 export BITS -UTS_MACHINE := i386 - -HAS_BIARCH := $(call cc-option-yn, -m32) -ifeq ($(HAS_BIARCH),y) -AS := $(AS) --32 -LD := $(LD) -m elf_i386 -CC := $(CC) -m32 -endif +UTS_MACHINE := x86_64 LDFLAGS := -m elf_$(UTS_MACHINE) OBJCOPYFLAGS := -O binary -R .note -R .comment -S -ifdef CONFIG_RELOCATABLE -LDFLAGS_vmlinux := --emit-relocs -endif +LDFLAGS_vmlinux := CHECKFLAGS += -D__$(UTS_MACHINE)__ +CHECKFLAGS += -m64 -KBUILD_CFLAGS += -pipe -msoft-float -mregparm=3 -freg-struct-return - -# prevent gcc from keeping the stack 16 byte aligned -KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) - -# CPU-specific tuning. Anything which can be shared with UML should go here. -include $(srctree)/arch/x86/Makefile_32.cpu - -# temporary until string.h is fixed -cflags-y += -ffreestanding - +cflags-y := +cflags-kernel-y := +cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8) +cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona) +# gcc doesn't support -march=core2 yet as of gcc 4.3, but I hope it +# will eventually. Use -mtune=generic as fallback +cflags-$(CONFIG_MCORE2) += \ + $(call cc-option,-march=core2,$(call cc-option,-mtune=generic)) +cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic) + +cflags-y += -m64 +cflags-y += -mno-red-zone +cflags-y += -mcmodel=kernel +cflags-y += -pipe +cflags-y += -Wno-sign-compare +cflags-y += -fno-asynchronous-unwind-tables +ifneq ($(CONFIG_DEBUG_INFO),y) +# -fweb shrinks the kernel a bit, but the difference is very small +# it also messes up debugging, so don't use it for now. +#cflags-y += $(call cc-option,-fweb) +endif +# -funit-at-a-time shrinks the kernel .text considerably +# unfortunately it makes reading oopses harder. +cflags-y += $(call cc-option,-funit-at-a-time) +# prevent gcc from generating any FP code by mistake +cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,) # this works around some issues with generating unwind tables in older gccs # newer gccs do it by default cflags-y += -maccumulate-outgoing-args -# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use -# a lot more stack due to the lack of sharing of stacklots: -KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;) - # do binutils support CFI? -stackreg=esp +stackreg=rsp cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(stackreg)${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(stackreg)${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) @@ -67,100 +73,60 @@ cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) -# Default subarch .c files -mcore-y := arch/x86/mach-default - -# Voyager subarch support -mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-x86/mach-voyager -mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager - -# VISWS subarch support -mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws -mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws - -# NUMAQ subarch support -mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-x86/mach-numaq -mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default - -# BIGSMP subarch support -mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp -mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default - -#Summit subarch support -mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit -mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default - -# generic subarchitecture -mflags-$(CONFIG_X86_GENERICARCH) := -Iinclude/asm-x86/mach-generic -mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default -core-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/ - -# ES7000 subarch support -mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-x86/mach-es7000 -mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default -core-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/ - -# Xen paravirtualization support -core-$(CONFIG_XEN) += arch/x86/xen/ - -# lguest paravirtualization support -core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/ - -# default subarch .h files -mflags-y += -Iinclude/asm-x86/mach-default +cflags-$(CONFIG_CC_STACKPROTECTOR) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector ) +cflags-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector-all ) KBUILD_CFLAGS += $(cflags-y) -KBUILD_CFLAGS += $(mflags-y) -KBUILD_AFLAGS += $(mflags-y) +CFLAGS_KERNEL += $(cflags-kernel-y) +KBUILD_AFLAGS += -m64 head-y := arch/x86/kernel/head_$(BITS).o arch/x86/kernel/init_task.o \ - + arch/x86/kernel/head64.o libs-y += arch/x86/lib/ core-y += arch/x86/kernel/ \ arch/x86/mm/ \ arch/x86/crypto/ \ - $(mcore-y)/ -drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/ + arch/x86/vdso/ +core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/ drivers-$(CONFIG_PCI) += arch/x86/pci/ # must be linked after kernel/ drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/ -drivers-$(CONFIG_PM) += arch/x86/power/ -drivers-$(CONFIG_FB) += arch/x86/video/ boot := arch/x86/boot PHONY += bzImage bzlilo install fdimage fdimage144 fdimage288 isoimage \ - zImage compressed zlilo zdisk bzdisk + archclean archmrproper #Default target when executing "make" all: bzImage # KBUILD_IMAGE specify target image being built KBUILD_IMAGE := $(boot)/bzImage -zImage zlilo zdisk: KBUILD_IMAGE := $(boot)/zImage bzImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE) $(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage -compressed zImage: bzImage - bzlilo: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo bzdisk: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk -zdisk: bzdisk - fdimage fdimage144 fdimage288 isoimage: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@ -install: +install: vdso_install $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@ +vdso_install: +ifeq ($(CONFIG_IA32_EMULATION),y) + $(Q)$(MAKE) $(build)=arch/x86/ia32 $@ +endif + $(Q)$(MAKE) $(build)=arch/x86/vdso $@ + archclean: $(Q)rm -rf $(objtree)/arch/$(UTS_MACHINE)/boot $(Q)$(MAKE) $(clean)=$(boot)
| |