Messages in this thread | | | Date | Wed, 14 Nov 2007 16:59:05 +0100 (GMT+01:00) | From | "" <> | Subject | PROBLEM: IM Kernel Failure 12/11/07 |
| |
This is the 5th attempt to email you! I keep being Greylisted! I've extracted the minimal info from a zip which may be failing.
I've had to send it from my personal Tiscali account.
Regards Martin
[1.] One line summary of the problem:
System crashed the night of Monday Nov 12 at 22:01
[2.] Full description of the problem/report:
There is a cronjob at that time
00 22 * * * . /usr/local/bin/backup_RCP_CVSROOT.sh > /usr/local/bin/cvs_backup.log 2>&1
[3.] Keywords (i.e., modules, networking, kernel):
kernel
[4.] Kernel version (from /proc/version):
Linux version 2.4.9-e.38smp (bhcompile@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.2 2.96-124.7.2)) #1 SMP Wed Feb 11 00:09:01 EST 2004
[5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt)
NO OOPS'ES !
vi ./usr/src/linux-2.4.9-e.3/Documentation/oops-tracing.txt will investigate ... not ... intuitive at first read!
[6.] A small shell script or example program which triggers the problem (if possible)
N/A
[7.] Environment
Er ... a Dell box I think!
[7.1.] Software (add the output of the ver_linux script here)
[root@pleco /]# sh ./usr/src/linux-2.4.9-e.3/scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux pleco.investmaster.com 2.4.9-e.38smp #1 SMP Wed Feb 11 00:09:01 EST 2004 i686 unknown
Gnu C 2.96 Gnu make 3.79.1 binutils 2.11.90.0.8 util-linux 2.11f mount 2.11g modutils 2.4.13 e2fsprogs 1.26 reiserfsprogs 3.x.0j PPP 2.4.1 isdn4k-utils 3.1pre1 Linux C Library 2.2.4 Dynamic linker (ldd) 2.2.4 Procps 2.0.7 Net-tools 1.60 Console-tools 0.3.3 Sh-utils 2.0.11 Modules Loaded soundcore ide-tape lp parport sr_mod ide-cd cdrom sg esm autofs nfs lockd sunrpc ppp_async ppp_generic slhc tg3 ipchains st usb-ohci usbcore ext3 jbd aic7xxx sd_mod scsi_mod
[7.2.] Processor information (from vi /proc/cpuinfo):
processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.40GHz stepping : 9 cpu MHz : 2386.846 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 4757.91
processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.40GHz stepping : 9 cpu MHz : 2386.846 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 4771.02
processor : 2 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.40GHz stepping : 9 cpu MHz : 2386.846 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 4771.02
processor : 3 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.40GHz stepping : 9 cpu MHz : 2386.846 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 4771.02
[7.3.] Module information (from vi /proc/modules):
soundcore 7940 0 (autoclean) ide-tape 61120 0 (autoclean) lp 8192 0 (autoclean) parport 38144 0 (autoclean) [lp] sr_mod 17560 0 (autoclean) (unused) ide-cd 35296 0 (autoclean) cdrom 35520 0 (autoclean) [sr_mod ide-cd] sg 35076 0 (autoclean) esm 84239 1 autofs 13796 0 (autoclean) (unused) nfs 98592 2 (autoclean) lockd 61184 1 (autoclean) [nfs] sunrpc 84432 1 (autoclean) [nfs lockd] ppp_async 8480 1 ppp_generic 26664 3 [ppp_async] slhc 6776 0 [ppp_generic] tg3 50528 1 ipchains 47760 0 st 30548 0 usb-ohci 23456 0 (unused) usbcore 68864 1 [usb-ohci] ext3 70944 4 jbd 55444 4 [ext3] aic7xxx 127200 5 sd_mod 13920 5 scsi_mod 126812 5 [sr_mod sg st aic7xxx sd_mod]
[7.4.] Loaded driver and hardware information (vi /proc/ioports, vi /proc/iomem)
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 01f0-01f7 : ide0 02f8-02ff : serial(auto) 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 08b0-08bf : ServerWorks CSB5 IDE Controller 08c0-08c7 : ServerWorks CSB5 IDE Controller 08c8-08cb : ServerWorks CSB5 IDE Controller 08d0-08d7 : ServerWorks CSB5 IDE Controller 08d8-08db : ServerWorks CSB5 IDE Controller 0cf8-0cff : PCI conf1 a000-afff : PCI Bus #05 a800-a8ff : Adaptec 7899P (#2) a800-a8fe : aic7xxx ac00-acff : Adaptec 7899P ac00-acfe : aic7xxx d800-d8ff : Adaptec 7899A (#2) d800-d8fe : aic7xxx dc00-dcff : Adaptec 7899A dc00-dcfe : aic7xxx e800-e8ff : ATI Technologies Inc Rage XL ec80-ecbf : Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di ec80-ec87 : serial(set) ece8-ecef : PCI device 1028:000c (Dell Computer Corporation) ecf4-ecf7 : PCI device 1028:000d (Dell Computer Corporation) ecf8-ecff : PCI device 1028:000c (Dell Computer Corporation)
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: ServerWorks: Unknown device 0014 (rev 33) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.1 Host bridge: ServerWorks: Unknown device 0014 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.2 Host bridge: ServerWorks: Unknown device 0014 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:04.0 Class ff00: Dell Computer Corporation: Unknown device 000c Subsystem: Dell Computer Corporation: Unknown device 000c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 10 Interrupt: pin A routed to IRQ 19 Region 0: Memory at feb80000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at ecf8 [size=8] Region 2: I/O ports at ece8 [size=8] Expansion ROM at fe000000 [disabled] [size=64K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-, D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.1 Class ff00: Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di Subsystem: Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 23 Region 0: Memory at fe102000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at ec80 [size=64] Region 2: Memory at feb00000 (32-bit, prefetchable) [size=512K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-, D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 Class ff00: Dell Computer Corporation: Unknown device 000d Subsystem: Dell Computer Corporation: Unknown device 000d Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 27 Region 0: I/O ports at ecf4 [size=4] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-, D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA]) Subsystem: Dell Computer Corporation: Unknown device 0121 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), cache line size 10 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at e800 [size=256] Region 2: Memory at fe101000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-, D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Host bridge: ServerWorks CSB5 South Bridge (rev 93) Subsystem: ServerWorks CSB5 South Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32
00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog- if 82 [Master PriP]) Subsystem: ServerWorks CSB5 IDE Controller Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 0: I/O ports at 08c0 [size=8] Region 1: I/O ports at 08c8 [size=4] Region 2: I/O ports at 08d0 [size=8] Region 3: I/O ports at 08d8 [size=4] Region 4: I/O ports at 08b0 [size=16]
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05) (prog-if 10 [OHCI]) Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
00:0f.3 ISA bridge: ServerWorks: Unknown device 0225 Subsystem: ServerWorks: Unknown device 0230 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:10.0 Host bridge: ServerWorks: Unknown device 0101 (rev 05) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Capabilities: [60] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=4 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
00:10.2 Host bridge: ServerWorks: Unknown device 0101 (rev 05) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Capabilities: [60] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=4 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
00:11.0 Host bridge: ServerWorks: Unknown device 0101 (rev 05) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Capabilities: [60] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=4 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
00:11.2 Host bridge: ServerWorks: Unknown device 0101 (rev 05) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Capabilities: [60] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=4 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
01:08.0 SCSI storage controller: Adaptec 7899A (rev 01) Subsystem: Adaptec: Unknown device f620 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (10000ns min, 6250ns max), cache line size 10 Interrupt: pin A routed to IRQ 20 BIST result: 00 Region 0: I/O ports at dc00 [size=256] Region 1: Memory at fcf01000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fce00000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-, D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:08.1 SCSI storage controller: Adaptec 7899A (rev 01) Subsystem: Adaptec: Unknown device f620 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (10000ns min, 6250ns max), cache line size 10 Interrupt: pin B routed to IRQ 21 BIST result: 00 Region 0: I/O ports at d800 [size=256] Region 1: Memory at fcf00000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fce00000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-, D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:06.0 Ethernet controller: BROADCOM Corporation: Unknown device 16a7 (rev 02) Subsystem: Dell Computer Corporation: Unknown device 0121 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (16000ns min), cache line size 10 Interrupt: pin A routed to IRQ 28 Region 0: Memory at fcd10000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=0 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-, D2-,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable- Address: 3ccb5f8345104190 Data: 2bd9
03:08.0 Ethernet controller: BROADCOM Corporation: Unknown device 16a7 (rev 02) Subsystem: Dell Computer Corporation: Unknown device 0121 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (16000ns min), cache line size 10 Interrupt: pin A routed to IRQ 29 Region 0: Memory at fcd00000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device. Command: DPERE- ERO+ RBC=0 OST=0 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-, D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable- Address: 5cbcd7d402670c00 Data: e809
04:08.0 PCI bridge: Intel Corporation: Unknown device 0309 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 10 Bus: primary=04, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fca00000-fcbfffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-, D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
05:06.0 SCSI storage controller: Adaptec 7899P (rev 01) Subsystem: Dell Computer Corporation: Unknown device 0121 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (10000ns min, 6250ns max), cache line size 10 Interrupt: pin A routed to IRQ 30 BIST result: 00 Region 0: I/O ports at ac00 [size=256] Region 1: Memory at fcaff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fcb00000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-, D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
05:06.1 SCSI storage controller: Adaptec 7899P (rev 01) Subsystem: Dell Computer Corporation: Unknown device 0121 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (10000ns min, 6250ns max), cache line size 10 Interrupt: pin B routed to IRQ 31 BIST result: 00 Region 0: I/O ports at a800 [size=256] Region 1: Memory at fcafe000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fcb00000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-, D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from vi /proc/scsi/scsi)
Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: BNCHMARK Model: DLT1 Rev: 5538 Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: MAXTOR Model: ATLAS10K4_73SCA Rev: DFM0 Type: Direct-Access ANSI SCSI revision: 03 Host: scsi2 Channel: 00 Id: 01 Lun: 00 Vendor: MAXTOR Model: ATLAS10K4_73SCA Rev: DFM0 Type: Direct-Access ANSI SCSI revision: 03 Host: scsi2 Channel: 00 Id: 02 Lun: 00 Vendor: MAXTOR Model: ATLAS10K4_73SCA Rev: DFM0 Type: Direct-Access ANSI SCSI revision: 03 Host: scsi2 Channel: 00 Id: 06 Lun: 00 Vendor: PE/PV Model: 1x5 SCSI BP Rev: 1.1 Type: Processor ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant):
I dread to think!
[X.] Other notes, patches, fixes, workarounds:
extract from msgNov12.lis (attached)
[root@pleco sysconfig]# grep "Nov 12" /var/log/messages > msgNov12. lis
Line no.
437 Nov 12 04:02:01 pleco syslogd 1.4.1: restart.
1282 Nov 12 11:42:05 pleco sshd(pam_unix)[18121]: session opened for user oracle by (uid=0) 1373 Nov 12 12:36:03 pleco pam_rhosts_auth[18283]: allowed to jnijjar@bloater as wmfo 1374 Nov 12 12:36:03 pleco rsh(pam_unix)[18283]: session opened for user wmfo by (uid=0) 1375 Nov 12 12:36:03 pleco rsh(pam_unix)[18283]: session closed for user wmfo 1376 Nov 12 12:36:03 pleco pam_rhosts_auth[18285]: allowed to jnijjar@bloater as wmfo 1377 Nov 12 12:36:03 pleco rsh(pam_unix)[18285]: session opened for user wmfo by (uid=0) 1378 Nov 12 12:36:03 pleco rsh(pam_unix)[18285]: session closed for user wmfo 1379 Nov 12 12:36:03 pleco pam_rhosts_auth[18287]: allowed to jnijjar@bloater as wmfo 1380 Nov 12 12:36:03 pleco rsh(pam_unix)[18287]: session opened for user wmfo by (uid=0) 1381 Nov 12 12:36:03 pleco pam_rhosts_auth[18288]: allowed to jnijjar@bloater as wmfo 1382 Nov 12 12:36:03 pleco rsh(pam_unix)[18288]: session opened for user wmfo by (uid=0) 1383 Nov 12 12:36:03 pleco pam_rhosts_auth[18289]: allowed to jnijjar@bloater as wmfo 1384 Nov 12 12:36:03 pleco rsh(pam_unix)[18289]: session opened for user wmfo by (uid=0) 1385 Nov 12 12:36:03 pleco rsh(pam_unix)[18289]: session closed for user wmfo 1386 Nov 12 12:36:03 pleco pam_rhosts_auth[18292]: allowed to jnijjar@bloater as wmfo 1387 Nov 12 12:36:03 pleco rsh(pam_unix)[18292]: session opened for user wmfo by (uid=0) 1388 Nov 12 12:36:03 pleco rsh(pam_unix)[18292]: session closed for user wmfo 1389 Nov 12 12:36:03 pleco pam_rhosts_auth[18295]: allowed to jnijjar@bloater as wmfo 1390 Nov 12 12:36:04 pleco rsh(pam_unix)[18295]: session opened for user wmfo by (uid=0) 1391 Nov 12 12:36:06 pleco rsh(pam_unix)[18295]: session closed for user wmfo 1392 Nov 12 12:36:06 pleco pam_rhosts_auth[18362]: allowed to jnijjar@bloater as wmfo 1393 Nov 12 12:36:06 pleco rsh(pam_unix)[18362]: session opened for user wmfo by (uid=0) 1394 Nov 12 12:36:09 pleco rsh(pam_unix)[18362]: session closed for user wmfo 1395 Nov 12 12:36:09 pleco pam_rhosts_auth[18417]: allowed to jnijjar@bloater as wmfo 1396 Nov 12 12:36:09 pleco rsh(pam_unix)[18417]: session opened for user wmfo by (uid=0) 1397 Nov 12 12:36:22 pleco rsh(pam_unix)[18417]: session closed for user wmfo 1398 Nov 12 12:36:22 pleco pam_rhosts_auth[18510]: allowed to jnijjar@bloater as wmfo 1399 Nov 12 12:36:22 pleco rsh(pam_unix)[18510]: session opened for user wmfo by (uid=0) 1400 Nov 12 12:36:22 pleco rsh(pam_unix)[18510]: session closed for user wmfo 1401 Nov 12 12:36:22 pleco pam_rhosts_auth[18513]: allowed to jnijjar@bloater as wmfo 1402 Nov 12 12:36:22 pleco rsh(pam_unix)[18513]: session opened for user wmfo by (uid=0) 1403 Nov 12 12:36:22 pleco pam_rhosts_auth[18514]: allowed to jnijjar@bloater as wmfo 1404 Nov 12 12:36:22 pleco rsh(pam_unix)[18514]: session opened for user wmfo by (uid=0)
1549 Nov 12 13:55:02 pleco login(pam_unix)[18605]: authentication failure; logname= uid=0 euid=0 tty=pts/2 ruser= rhost=portwrinkle user=cvsadmin 1550 Nov 12 13:55:04 pleco login[18605]: FAILED LOGIN 1 FROM portwrinkle FOR cvsadmin, Authentication failure 1551 Nov 12 13:55:16 pleco login[18605]: FAILED LOGIN 2 FROM portwrinkle FOR cvsadmin, Authentication failure 1552 Nov 12 13:56:32 pleco login(pam_unix)[18609]: session opened for user cvsadmin by (uid=0) 1553 Nov 12 13:56:32 pleco -- cvsadmin[18609]: LOGIN ON pts/2 BY cvsadmin FROM portwrinkle
1788 Nov 12 15:59:30 pleco su(pam_unix)[18908]: session opened for user root by oracle(uid=502) 1789 Nov 12 16:00:21 pleco su(pam_unix)[18908]: session closed for user root 1790 Nov 12 16:00:44 pleco su(pam_unix)[18978]: session opened for user root by oracle(uid=502) 1809 Nov 12 16:04:32 pleco su(pam_unix)[19029]: session opened for user oracle by oracle(uid=0) 1810 Nov 12 16:04:32 pleco su(pam_unix)[19029]: session closed for user oracle 1811 Nov 12 16:04:32 pleco vncserver: vncserver shutdown failed 1812 Nov 12 16:04:42 pleco su(pam_unix)[19051]: session opened for user oracle by oracle(uid=0) 1813 Nov 12 16:04:42 pleco su: A VNC server is already running as :1 1814 Nov 12 16:04:42 pleco su(pam_unix)[19051]: session closed for user oracle 1815 Nov 12 16:04:43 pleco vncserver: vncserver start failed 1816 Nov 12 16:04:54 pleco su(pam_unix)[19073]: session opened for user oracle by oracle(uid=0) 1817 Nov 12 16:04:54 pleco su(pam_unix)[19073]: session closed for user oracle 1818 Nov 12 16:04:54 pleco vncserver: vncserver shutdown failed 1819 Nov 12 16:04:55 pleco su(pam_unix)[18978]: session closed for user root 1820 Nov 12 16:05:10 pleco su(pam_unix)[19082]: session opened for user root by oracle(uid=502) 1821 Nov 12 16:05:14 pleco su(pam_unix)[19124]: session opened for user oracle by oracle(uid=0) 1822 Nov 12 16:05:14 pleco su(pam_unix)[19124]: session closed for user oracle 1823 Nov 12 16:05:14 pleco vncserver: vncserver shutdown failed 1824 Nov 12 16:05:19 pleco su(pam_unix)[19146]: session opened for user oracle by oracle(uid=0) 1825 Nov 12 16:05:20 pleco su: A VNC server is already running as :1 1826 Nov 12 16:05:20 pleco su(pam_unix)[19146]: session closed for user oracle 1827 Nov 12 16:05:20 pleco vncserver: vncserver start failed 1828 Nov 12 16:05:26 pleco su(pam_unix)[19082]: session closed for user root 1829 Nov 12 16:05:28 pleco sshd(pam_unix)[18121]: session closed for user oracle
2014 Nov 12 17:29:37 pleco sshd(pam_unix)[19263]: session opened for user oracle by (uid=0)
2059 Nov 12 17:47:10 pleco su(pam_unix)[19329]: session opened for user root by oracle(uid=502) 2060 Nov 12 17:48:21 pleco su(pam_unix)[19329]: session closed for user root 2071 Nov 12 17:52:02 pleco gnome-name-server[19450]: starting 2072 Nov 12 17:52:02 pleco gnome-name-server[19450]: name server starting 2077 Nov 12 17:52:04 pleco gconfd (oracle-19457): starting (version 1.0.4), pid 19457 user 'oracle' 2078 Nov 12 17:52:04 pleco gconfd (oracle-19457): Successfully registered `OAFIID:gconfd:19991118' 2079 Nov 12 17:52:04 pleco gconfd (oracle-19457): Unable to open saved state file '/usr/oracle/.gconfd/saved_state': No such file or directory 2080 Nov 12 17:52:04 pleco xinetd[19469]: warning: can't get client address: Transport endpoint is not connected 2089 Nov 12 17:57:04 pleco gconfd (oracle-19457): 1 items remain in the cache after cleaning already-synced items older than 300 seconds
2198 Nov 12 18:46:45 pleco su(pam_unix)[19650]: session opened for user root by oracle(uid=502) 2199 Nov 12 18:46:54 pleco su(pam_unix)[19650]: session closed for user root 2200 Nov 12 18:47:34 pleco sshd(pam_unix)[19263]: session closed for user oracle
2247 Nov 12 19:06:54 pleco sshd(pam_unix)[19997]: session opened for user oracle by (uid=0)
2272 Nov 12 19:13:26 pleco su(pam_unix)[20050]: session opened for user root by oracle(uid=502) 2273 Nov 12 19:13:34 pleco su(pam_unix)[20092]: session opened for user oracle by oracle(uid=0) 2274 Nov 12 19:13:34 pleco gnome-name-server[19450]: input condition is: 0x11, exiting 2275 Nov 12 19:13:34 pleco su(pam_unix)[20092]: session closed for user oracle 2276 Nov 12 19:13:34 pleco vncserver: vncserver shutdown succeeded 2277 Nov 12 19:14:03 pleco su(pam_unix)[20132]: session opened for user oracle by oracle(uid=0) 2278 Nov 12 19:14:06 pleco su: 2279 Nov 12 19:14:06 pleco su: New 'X' desktop is pleco.investmaster. com:2 2280 Nov 12 19:14:06 pleco su: 2281 Nov 12 19:14:06 pleco su: Starting ap plications specified in /usr/oracle/.vnc/xstartup 2282 Nov 12 19:14:06 pleco su: Log file is/usr/oracle/.vnc/pleco. investmaster.com:2.log 2283 Nov 12 19:14:06 pleco su: 2284 Nov 12 19:14:06 pleco su(pam_unix)[20 132]: session closed for user oracle 2285 Nov 12 19:14:06 pleco vncserver: vncserver startup succeeded 2286 Nov 12 19:14:09 pleco gnome-name-server[20198]: starting 2287 Nov 12 19:14:09 pleco gnome-name-server[20198]: name server starting 2288 Nov 12 19:14:12 pleco su(pam_unix)[20050]: session closed for user root 2289 Nov 12 19:14:25 pleco su(pam_unix)[20325]: session opened for user root by oracle(uid=502) 2290 Nov 12 19:14:33 pleco su(pam_unix)[20325]: session closed for user root 2291 Nov 12 19:14:38 pleco sshd(pam_unix)[19997]: session closed for user oracle 2292 Nov 12 19:17:04 pleco gconfd (oracle-19457): 1 items remain in the cache after cleaning already-synced items older than 300 seconds
2639 Nov 12 22:01:37 pleco kernel: Unable to handle kernel paging request at virtual address 1aaf2008 2640 Nov 12 22:01:37 pleco kernel: printing eip: 2641 Nov 12 22:01:37 pleco kernel: c01315df 2642 Nov 12 22:01:37 pleco kernel: *pde = 0 2643 Nov 12 22:01:37 pleco kernel: Oops: 00 2644 Nov 12 22:01:37 pleco kernel: Kernel 2.4.9-e.38smp 2645 Nov 12 22:01:37 pleco kernel: CPU: 0 2646 Nov 12 22:01:37 pleco kernel: EIP: 0010: [do_generic_file_read+463/1680] Tainted: P 2647 Nov 12 22:01:37 pleco kernel: EIP: 0010:[<c01315df>] Tainted: P 2648 Nov 12 22:01:37 pleco kernel: EFLAGS: 10206 2649 Nov 12 22:01:37 pleco kernel: EIP isat do_generic_file_read [kernel] 0x1cf 2650 Nov 12 22:01:37 pleco kernel: eax: 1aaf2000 ebx: 00000001 ecx: 00000013 edx: f77d5378 2651 Nov 12 22:01:37 pleco kernel: esi: 00000000 edi: e43e8d38 ebp: 00000000 esp: e2525ef8 2652 Nov 12 22:01:37 pleco kernel: ds: 0018 es: 0018 ss: 0018 2653 Nov 12 22:01:37 pleco kernel: Processtar (pid: 20836, stackpage=e2525000) 2654 Nov 12 22:01:37 pleco kernel: Stack: 00001000 f77d537c 00000001 00000000 00000000 e43e8c80 00000322 e43e8c80 2655 Nov 12 22:01:37 pleco kernel: 00000004 00008001 00000000 0806f528 00000000 00001600 c0131c27 cc263bc0 2656 Nov 12 22:01:37 pleco kernel: cc263be0 e2525f48 c0131aa0 00000000 00000000 00001600 0806f528 00000000 2657 Nov 12 22:01:37 pleco kernel: Call Trace: [generic_file_new_read+103/128] generic_file_new_read [kernel] 0x67 (0xe2525f30) 2658 Nov 12 22:01:37 pleco kernel: Call Trace: [<c0131c27>] generic_file_new_read [kernel] 0x67 (0xe2525f30) 2659 Nov 12 22:01:37 pleco kernel: [file_read_actor+0/256] file_read_actor [kernel] 0x0 (0xe2525f40) 2660 Nov 12 22:01:37 pleco kernel: [<c0131aa0>] file_read_actor [kernel] 0x0 (0xe2525f40) 2661 Nov 12 22:01:38 pleco kernel: [generic_file_read+27/32] generic_file_read [kernel] 0x1b (0xe2525f64) 2662 Nov 12 22:01:38 pleco kernel: [<c0131bbb>] generic_file_read [kernel] 0x1b (0xe2525f64) 2663 Nov 12 22:01:38 pleco kernel: [sys_red+150/288] sys_read [kernel] 0x96 (0xe2525f7c) 2664 Nov 12 22:01:38 pleco kernel: [<c0145cd6>] sys_read [kernel] 0x96 (0xe2525f7c) 2665 Nov 12 22:01:38 pleco kernel: [sys_open+149/224] sys_open [kernel] 0x95 (0xe2525fa4) 2666 Nov 12 22:01:38 pleco kernel: [<c01456e5>] sys_open [kernel] 0x95 (0xe2525fa4) 2667 Nov 12 22:01:38 pleco kernel: [system_call+51/56] system_call [kernel] 0x33 (0xe2525fc0) 2668 Nov 12 22:01:38 pleco kernel: [<c01073e3>] system_call [kernel] 0x33 (0xe2525fc0) 2669 Nov 12 22:01:38 pleco kernel: 2670 Nov 12 22:01:38 pleco kernel: 2671 Nov 12 22:01:38 pleco kernel: Code: 3 9 78 08 75 f4 39 68 0c 75 ef 89 c6 85 f6 0f 84 8d 02 00 00
Nov 13 14:36:33 pleco syslogd 1.4.1: restart.
Martin Peter Clarke - Oracle DBA Investmaster Group Ltd 5 Granville Road Leicester LE1 7RU
Direct Line: +44 (0)116 224 5033
Mob: +44 (0)7776 306523
Switchboard: +44 (0)116 233 5050 Fax: +44 (0)116 255 0822
__________________________________________________ Get an exclusive discount on Norton 360 from Tiscali http://www.tiscali.co.uk/products/securepc - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |