lkml.org 
[lkml]   [2007]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRaid 10 question/problem [ot]
I'm a little stumped trying to set up raid 10. I set
it up and it worked but after a reboot it forgets my
raid setup.

Created 2 raid 1 arrays in md0 and md1 and that works
and survives a reboot.

However - I created a raid 0 on /dev/md2 made up of
/dev/md0 and /dev/md1 and it worked but it forgets it
after I reboot. The device /dev/md2 fails to survive a
reboot.

Created the /etc/mdadm.conf file but that doesn't seem
to have made a difference.

What am I missing? Thanks in advance.





____________________________________________________________________________________
Don't pick lemons.
See all the new 2007 cars at Yahoo! Autos.
http://autos.yahoo.com/new_cars.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-01-27 19:11    [W:0.100 / U:1.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site