lkml.org 
[lkml]   [2007]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectIO-APIC + timer doesn't work - 2.6.20-rc5 on abit KN9-Ultra bios 1.6
From
Date
Hi,

I can't get any kernel up to 2.6.20-rc5 to boot without using noapic on
an ABIT KN9-Ultra with a dual-core Athlon.

I booted with apic=debug as suggested and got the following :

ENABLING IO-APIC IRQs
.. TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
.. MP-BIOS bug: 8254 timer not connected to IO-APIC
... trying to set up timer (IRQ0) through the 8252A ... failed
... trying to set up timer as Virtual Wire IRQ ... failed
... trying to set up timer as ExtINT IRQ ... failed :(

The bios is the latest, although in various posts on the web it would
appear this occurs in older versions also.

What can I do to help resolve this?

Cheers,
Eamonn
--
Eamonn Hamilton <eamonn.hamilton@saic.com>


--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-01-24 11:13    [W:0.059 / U:1.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site