lkml.org 
[lkml]   [2006]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.6.18-git9
I have a couple of power boxes which no longer seem to be able to
compile mainline as of 2.6.18-git9. The build fails as below:

CC drivers/usb/core/driver.o
drivers/usb/core/driver.c: In function `usb_probe_device':
drivers/usb/core/driver.c:168: error: structure has no member named
`pm_usage_cnt'
drivers/usb/core/driver.c: In function `usb_driver_claim_interface':
drivers/usb/core/driver.c:305: error: structure has no member named
`pm_mutex'
drivers/usb/core/driver.c:309: error: structure has no member named
`pm_mutex'
drivers/usb/core/driver.c: In function `usb_driver_release_interface':
drivers/usb/core/driver.c:358: error: structure has no member named
`pm_mutex'
drivers/usb/core/driver.c:362: error: structure has no member named
`pm_mutex'
make[3]: *** [drivers/usb/core/driver.o] Error 1
make[2]: *** [drivers/usb/core] Error 2
make[1]: *** [drivers/usb] Error 2
make: *** [drivers] Error 2

This seems to be realated to the changes in this commit:

commit 645daaab0b6adc35c1838df2a82f9d729fdb1767
usbcore: add autosuspend/autoresume infrastructure

The machines in question do not have CONFIG_PM set. It seems that the
definition of pm_mutex et al in struct usb_device are contingent on that
defined, but the use of it in usb_driver_release_interface() are not.

Its not clear to me if suspending in this context is quite the same as
full suspend to disk that I associate with PM so I am unsure which bit
is in error. Will retest with those references under CONFIG_PM.

Alan?

-apw
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-09-28 11:27    [W:0.070 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site