Messages in this thread | | | Date | Sun, 27 Aug 2006 09:18:10 +1000 | From | Noel <> | Subject | Seg Fault loading 2.4.33.2 |
| |
System does not boot with latest 2.4.33.2 kernel
The same kernel options ( a cp .config ) from 2.4.32 to new kernel 2.4.33.2 tree make menuconfig and saved (no changes made)
This is Slackware 10.2
all makes and installs succeed without a glitch
ver_linux output: Linux valhalla 2.4.32.s #2 SMP Fri Jun 16 17:58:07 EST 2006 i686 unknown unknown GNU/Linux
Gnu C 3.3.6 Gnu make 3.80 binutils 2.15.92.0.2 util-linux 2.12p mount 2.12p modutils 2.4.27 e2fsprogs 1.38 jfsutils 1.1.8 xfsprogs 2.6.13 pcmcia-cs 3.2.8 quota-tools 3.12. Linux C Library 2.3.5 Dynamic linker (ldd) 2.3.5 Linux C++ Library 5.0.7 Procps 3.2.5 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 Modules Loaded ipt_state ip_conntrack ipt_REJECT iptable_mangle iptable_filter ip_tables i810_rng pcmcia_core ide-scsi agpgart
# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.60GHz stepping : 9 cpu MHz : 2593.521 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips : 5177.34
processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.60GHz stepping : 9 cpu MHz : 2593.521 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips : 5177.34
# cat /proc/meminfo total: used: free: shared: buffers: cached: Mem: 1056575488 417181696 639393792 0 5332992 75481088 Swap: 954122240 0 954122240
# capture file:
> > LILO 22.7.1 > > Welcome to the LILO Boot Loader! > > Please enter the name of the partition you would like to boot > > at the prompt below. The choices are: > > Linux - (Linux partition) > > boot: > > Loading Linux........................ > > BIOS data check successful > > Linux version 2.4.33.2 (root@valhalla) (gcc version 3.3.6) #2 SMP Sun > Aug 27 07:56:31 EST 2006 > > BIOS-provided physical RAM map: > > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > > BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) > > BIOS-e820: 0000000000100000 - 000000003fe30000 (usable) > > BIOS-e820: 000000003fe30000 - 000000003fe3e05e (ACPI NVS) > > BIOS-e820: 000000003fe3e05e - 000000003ff30000 (usable) > > BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data) > > BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS) > > BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) > > BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) > > BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) > > 127MB HIGHMEM available. > > 896MB LOWMEM available. > > found SMP MP-table at 000ff780 > > hm, page 000ff000 reserved twice. > > hm, page 00100000 reserved twice. > > hm, page 000fc000 reserved twice. > > hm, page 000fd000 reserved twice. > > On node 0 totalpages: 261936 > > zone(0): 4096 pages. > > zone(1): 225280 pages. > > zone(2): 32560 pages. > > ACPI: RSDP (v000 ACPIAM ) @ 0x000f63b0 > > ACPI: RSDT (v001 INTEL D865PERL 0x20040122 MSFT 0x00000097) @ 0x3ff30000 > > ACPI: FADT (v002 INTEL D865PERL 0x20040122 MSFT 0x00000097) @ 0x3ff30200 > > ACPI: MADT (v001 INTEL D865PERL 0x20040122 MSFT 0x00000097) @ 0x3ff30300 > > ACPI: ASF! (v016 LEGEND I865PASF 0x00000001 MSFT 0x0100000d) @ 0x3ff344e0 > > ACPI: WDDT (v001 INTEL OEMWDDT 0x00000001 MSFT 0x0100000d) @ 0x3ff34579 > > ACPI: DSDT (v001 INTEL D865PERL 0x00000006 MSFT 0x0100000d) @ 0x00000000 > > ACPI: Local APIC address 0xfee00000 > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > > Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > > Processor #1 Pentium 4(tm) XEON(tm) APIC version 20 > > ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) > > Using ACPI for processor (LAPIC) configuration information > > Intel MultiProcessor Specification v1.4 > > Virtual Wire compatibility mode. > > OEM ID: Product ID: Springdale-G APIC at: 0xFEE00000 > > I/O APIC #2 Version 32 at 0xFEC00000. > > Enabling APIC mode: Flat. Using 1 I/O APICs > > Processors: 2 > > Kernel command line: auto BOOT_IMAGE=Linux ro root=301 apm=power-off > console=ttyS0,9600n8 > > Initializing CPU#0 > > Detected 2593.562 MHz processor. > > Console: colour VGA+ 80x25 > > Calibrating delay loop... 5177.34 BogoMIPS > > Memory: 1031640k/1047744k available (1812k kernel code, 15656k > reserved, 682k data, 172k init, 130180k highmem) > > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > > Inode cache hash table entries: 65536 (order: 7, 524288 bytes) > > Mount cache hash table entries: 512 (order: 0, 4096 bytes) > > Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) > > Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) > > CPU: Trace cache: 12K uops, L1 D cache: 8K > > CPU: L2 cache: 512K > > CPU: Physical Processor ID: 0 > > Intel machine check architecture supported. > > Intel machine check reporting enabled on CPU#0. > > Enabling fast FPU save and restore... done. > > Enabling unmasked SIMD FPU exception support... done. > > Checking 'hlt' instruction... OK. > > POSIX conformance testing by UNIFIX > > mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) > > mtrr: detected mtrr type: Intel > > CPU: Trace cache: 12K uops, L1 D cache: 8K > > CPU: L2 cache: 512K > > CPU: Physical Processor ID: 0 > > Intel machine check reporting enabled on CPU#0. > > CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 > > per-CPU timeslice cutoff: 1462.72 usecs. > > enabled ExtINT on CPU#0 > > ESR value before enabling vector: 00000000 > > ESR value after enabling vector: 00000000 > > Booting processor 1/1 eip 2000 > > Initializing CPU#1 > > masked ExtINT on CPU#1 > > ESR value before enabling vector: 00000000 > > ESR value after enabling vector: 00000000 > > Calibrating delay loop... 5177.34 BogoMIPS > > CPU: Trace cache: 12K uops, L1 D cache: 8K > > CPU: L2 cache: 512K > > CPU: Physical Processor ID: 0 > > Intel machine check reporting enabled on CPU#1. > > CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 > > Total of 2 processors activated (10354.68 BogoMIPS). > > cpu_sibling_map[0] = 1 > > cpu_sibling_map[1] = 0 > > ENABLING IO-APIC IRQs > > Setting 2 in the phys_id_present_map > > ...changing IO-APIC physical APIC ID to 2 ... ok. > > ..TIMER: vector=0x31 pin1=2 pin2=0 > > testing the IO APIC....................... > > .................................... done. > > Using local APIC timer interrupts. > > calibrating APIC timer ... > > ..... CPU clock speed is 2593.4920 MHz. > > ..... host bus clock speed is 199.4992 MHz. > > cpu: 0, clocks: 1994992, slice: 664997 > > CPU0<T0:1994992,T1:1329984,D:11,S:664997,C:1994992> > > cpu: 1, clocks: 1994992, slice: 664997 > > CPU1<T0:1994992,T1:664992,D:6,S:664997,C:1994992> > > checking TSC synchronization across CPUs: passed. > > Waiting on wait_init_idle (map = 0x2) > > All processors have done init_idle > > PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 > > PCI: Using configuration type 1 > > PCI: Probing PCI hardware > > PCI: Probing PCI hardware (bus 00) > > PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 > > Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge > > PCI: Using IRQ router PIIX/ICH [8086/24d0] at 00:1f.0 > > PCI->APIC IRQ transform: (B0,I29,P0) -> 16 > > PCI->APIC IRQ transform: (B0,I29,P1) -> 19 > > PCI->APIC IRQ transform: (B0,I29,P2) -> 18 > > PCI->APIC IRQ transform: (B0,I29,P0) -> 16 > > PCI->APIC IRQ transform: (B0,I29,P3) -> 23 > > PCI->APIC IRQ transform: (B0,I31,P0) -> 18 > > PCI->APIC IRQ transform: (B0,I31,P0) -> 18 > > PCI->APIC IRQ transform: (B0,I31,P1) -> 17 > > PCI->APIC IRQ transform: (B0,I31,P1) -> 17 > > PCI->APIC IRQ transform: (B2,I0,P0) -> 21 > > PCI->APIC IRQ transform: (B2,I2,P0) -> 17 > > isapnp: Scanning for PnP cards... > > isapnp: No Plug & Play device found > > Linux NET4.0 for Linux 2.4 > > Based upon Swansea University Computer Society NET3.039 > > Initializing RT netlink socket > > apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) > > apm: disabled - APM is not SMP safe (power off active). > > Starting kswapd > > allocated 32 pages and 32 bhs reserved for the highmem bounces > > VFS: Disk quotas vdquot_6.5.1 > > Journalled Block Device driver loaded > > Detected PS/2 Mouse Port. > > pty: 2048 Unix98 ptys configured > > keyboard: Timeout - AT keyboard not present?(ed) > > keyboard: Timeout - AT keyboard not present?(f4) > > Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT > SHARE_IRQ SERIAL_PCI ISAPNP enabled > > ttyS00 at 0x03f8 (irq = 4) is a 16550A > > Real Time Clock Driver v1.10f > > Floppy drive(s): fd0 is 1.44M > > FDC 0 is a post-1991 82077 > > NET4: Frame Diverter 0.46 > > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > > Intel(R) PRO/100 Network Driver - version 2.3.43-k1 > > Copyright (c) 2004 Intel Corporation > > e100: eth0: Intel(R) PRO/100 Network Connection > > Hardware receive checksums enabled > > cpu cycle saver enabled > > Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 > > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > > ICH5: IDE controller at PCI slot 00:1f.1 > > PCI: Enabling device 00:1f.1 (0005 -> 0007) > > ICH5: chipset revision 2 > > ICH5: not 100% native mode: will probe irqs later > > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA > > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio > > hda: Maxtor 6Y080L0, ATA DISK drive > > hdb: ST3300622A, ATA DISK drive > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > hda: attached ide-disk driver. > > hda: host protected area => 1 > > hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, > UDMA(33) > > hdb: attached ide-disk driver. > > hdb: host protected area => 1 > > hdb: 586072368 sectors (300069 MB) w/16384KiB Cache, CHS=36481/255/63, > UDMA(33) > > Partition check: > > hda: [PTBL] [9964/255/63] hda1 hda2 > > hdb: hdb1 > > ide: late registration of driver. > > SCSI subsystem driver Revision: 1.00 > > sym53c416.c: Version 1.0.0-ac > > DC390: 0 adapters found > > kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 > > kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 > > kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 > > kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 > > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 > > md: Autodetecting RAID arrays. > > md: autorun ... > > md: ... autorun DONE. > > NET4: Linux TCP/IP 1.0 for NET4.0 > > IP Protocols: ICMP, UDP, TCP, IGMP > > IP: routing cache hash table of 8192 buckets, 64Kbytes > > TCP: Hash tables configured (established 262144 bind 65536) > > Linux IP multicast router 0.06 plus PIM-SM > > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > > VFS: Mounted root (ext2 filesystem) readonly. > > Freeing unused kernel memory: 172k freed > > INIT: version 2.84 booting > > sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion > `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm > volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i" > (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value) > == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i" > (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value) > != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl > %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread > *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); } > __value; }) != ppid' failed. > > /etc/rc.d/rc.S: line 11: 17 Segmentation fault /sbin/mount -v > proc /proc -n -t proc > > sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion > `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm > volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i" > (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value) > == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i" > (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value) > != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl > %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread > *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); } > __value; }) != ppid' failed. > > sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion > `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm > volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i" > (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value) > == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i" > (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value) > != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl > %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread > *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); } > __value; }) != ppid' failed. > > /etc/rc.d/rc.S: line 36: 18 Segmentation fault cat > /proc/filesystems > > 19 | grep -w sysfs >/dev/null 2>/dev/null > > sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion > `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm > volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i" > (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value) > == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i" > (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value) > != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl > %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread > *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); } > __value; }) != ppid' failed. > > /etc/rc.d/rc.S: line 46: 20 Segmentation fault /sbin/swapon -a > > sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion > `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm > volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i" > (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value) > == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i" > (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value) > != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl > %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread > *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); } > __value; }) != ppid' failed. > > /etc/rc.d/rc.S: line 55: 21 Segmentation fault touch > /fsrwtestfile 2>/dev/null > > Testing root filesystem status: read-only filesystem > > Checking root filesystem: > > sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion > `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm > volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i" > (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value) > == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i" > (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value) > != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl > %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread > *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); } > __value; }) != ppid' failed. > > /etc/rc.d/rc.S: line 159: 22 Segmentation fault /sbin/fsck > $FORCEFSCK -C -a / > > *********************************************************** > > *** An error occurred during the root filesystem check. *** > > *** You will now be given a chance to log into the *** > > *** system in single-user mode to fix the problem. *** > > *** *** > > *** If you are using the ext2 filesystem, running *** > > *** 'e2fsck -v -y <partition>' might help. *** > > *********************************************************** > > Once you exit the single-user shell, the system will reboot. > > sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion > `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm > volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i" > (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value) > == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i" > (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value) > != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl > %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread > *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); } > __value; }) != ppid' failed. > > /etc/rc.d/rc.S: line 159: 23 Segmentation fault sulogin > > Unmounting file systems. > > sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion > `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm > volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i" > (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value) > == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i" > (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value) > != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl > %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread > *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); } > __value; }) != ppid' failed. > > /etc/rc.d/rc.S: line 159: 24 Segmentation fault /sbin/umount -a -r > > sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion > `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm > volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i" > (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value) > == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i" > (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value) > != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl > %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread > *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); } > __value; }) != ppid' failed. > > /etc/rc.d/rc.S: line 159: 25 Segmentation fault /sbin/mount -n > -o remount,ro / > > Rebooting system. > > sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion > `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm > volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i" > (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value) > == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i" > (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value) > != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl > %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread > *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); } > __value; }) != ppid' failed. > > /etc/rc.d/rc.S: line 159: 26 Segmentation fault sleep 2 > > sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion > `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm > volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i" > (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value) > == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i" > (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value) > != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl > %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread > *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); } > __value; }) != ppid' failed. > > /etc/rc.d/rc.S: line 159: 27 Segmentation fault reboot -f > > Remounting root device with read-write enabled. > > sh: ../nptl/sysdeps/unix/sysv/linux/fork.c:138: __libc_fork: Assertion > `({ __typeof (self->tid) __value; if (sizeof (__value) == 1) asm > volatile ("movb %%gs:%P2,%b0" : "=q" (__value) : "0" (0), "i" > (((size_t) &((struct pthread *)0)->tid))); else if (sizeof (__value) > == 4) asm volatile ("movl %%gs:%P1,%0" : "=r" (__value) : "i" > (((size_t) &((struct pthread *)0)->tid))); else { if (sizeof (__value) > != 8) abort (); asm volatile ("movl %%gs:%P1,%%eax\n\t" "movl > %%gs:%P2,%%edx" : "=A" (__value) : "i" (((size_t) &((struct pthread > *)0)->tid)), "i" (((size_t) &((struct pthread *)0)->tid) + 4)); } > __value; }) != ppid' failed. > > /etc/rc.d/rc.S: line 159: 28 Segmentation fault /sbin/mount -w > -v -n -o remount / > > Attempt to remount root device as read-write failed! This is going to > > cause serious problems. > > If you're using the UMSDOS filesystem, you **MUST** mount the root > partition > > read-write! You can make sure the root filesystem is getting mounted > > read-write with the 'rw' flag to Loadlin: > > loadlin vmlinuz root=/dev/hda1 rw (replace /dev/hda1 with your root > device) > > Normal bootdisks can be made to mount a system read-write with the > rdev command: > > rdev -R /dev/fd0 0 > > You can also get into your system by using a boot disk with a command > like this > > on the LILO prompt line: (change the root partition name as needed) > > LILO: mount root=/dev/hda1 rw > > Please press ENTER to continue, then reboot and use one of the above > methods to > > get into your >
..at this time I power cycled and reloaded to kern 2.4.32 and it remains active
Hope you can offer some suggestions.
Thanks. Res - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |