Messages in this thread | | | From | Arkadiusz Miskiewicz <> | Subject | 2.6.16git14 - resume from suspend to ram faild on SATA hard drive | Date | Thu, 30 Mar 2006 09:26:56 +0200 |
| |
I'm trying to do suspend to ram on 2.6.16git14 kernel on ThinkPad Z60m with SATA hard drive.
Suspend/resume almost works. Unfortunately there is a problem with resume of hard drive.
After resume hard drive is borking and I only get bunch of SCSI errors: http://www.t17.ds.pwr.wroc.pl/~misiek/rozne/libata-suspend1.jpg
The interesting thing is that kernel 2.6.14.7 resumes fine (just it takes several seconds for hard drive to respond after resume).
Should it resume properly with this hardware? AFAIK all needed patches are already merged in 2.6.16git14...
SATA stuff used: ata_piix 9348 2 libata 59020 1 ata_piix scsi_mod 88840 3 sr_mod,sd_mod,libata
boot log:
SCSI subsystem initialized libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1880 irq 14 ata1: dev 0 cfg 49:0f00 82:746b 83:7f69 84:6063 85:f469 86:3c49 87:6063 88:203f ata1: dev 0 ATA-7, max UDMA/100, 195371568 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix Vendor: ATA Model: HTS541010G9SA00 Rev: MBZI Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 ata2: dev 0 ATAPI, max UDMA/33 ata2: dev 0 configured for UDMA/33 scsi1 : ata_piix Vendor: MATSHITA Model: DVD-RAM UJ-830Sx Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 05 SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda
-- Arkadiusz Miśkiewicz PLD/Linux Team arekm / maven.pl http://ftp.pld-linux.org/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |