lkml.org 
[lkml]   [2006]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectLoading e100 and uhcd-hcd at (almost) same time disables IRQ with 2.6.16-rc4
This is with a supermicro P3TSSE mainboard, with an Intel 815E chipset, where 
the two integrated network adapters (Intel82559 10/100 Ethernet) and one of the
two usb host adapters share the same IRQ (irq 11).

When udev synthesizes hotplug events during boot and there is interrupt activity
(e.g. by flood pinging one interface) I get an "irq 11: nobody cared" message
followed by a traceback and "Disabling IRQ #11". After that unsurprisingly both
network adapters are dead which is unfortunate as this usually is a headless
server machine.

I reproduced the problem on another identical hardware, so faulty hardware is
(almost) ruled out. The bug is already present in 2.6.14, I did not try to trace
it farther back.

dmesg from normal and failed boots and further info can be found on
http://bugzilla.kernel.org/show_bug.cgi?id=5918


--

Mit freundlichen Grüßen / with kind regards

Nils Rennebarth
--
VarySys Technologies GmbH & Co. KG
Moenchhaldenstraße 28
70191 Stuttgart
Germany
Tel +49 711 2501198
Fax +49 711 2501197
mailto:Nils.Rennebarth@packetalarm.com
http://www.packetalarm.com

Download the free software trial version of PacketAlarm now
http://www.packetalarm.com/download/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-02-22 11:48    [W:0.152 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site