lkml.org 
[lkml]   [2006]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: LibPATA code issues / 2.6.15.4
Sander wrote:
> Mark Lord wrote (ao):
>> On Friday 17 February 2006 03:45, Jeff Garzik wrote:
>>> Submit a patch...
>> You mean, something like this one?
...
> [ 633.449961] md: md1: sync done.
> [ 633.456070] RAID5 conf printout:
> [ 633.456117] --- rd:9 wd:9 fd:0
...
> [ 1872.338185] ata6: translated op=0x2a ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 1872.338239] ata6: status=0xd0 { Busy }
> [ 5749.285084] ata8: translated op=0x2a ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 5749.285138] ata8: status=0xd0 { Busy }
> [ 5906.008461] ata6: translated op=0x2a ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 5906.008515] ata6: status=0xd0 { Busy }
...
> This is with 2.6.16-rc3, your patch, and running nine Maxtors disks
> over onboard nForce4 and MV88SX6081 8-port SATA II PCI-X Controller (rev 09).
>
> for i in `seq 10`
> do dd if=/dev/zero of=bigfile.$i bs=1024k count=10000
> done
> md5sum bigfile.*
>
> The errors mostly seem to happen during the md5sum (not during the dd).

SCSI opcode 0x2a is WRITE_10, so the errors are being reported
in response to the writes to bigfile.$i. But these are different
from the previously reported error status values -- I wonder why
it's getting "Busy" back as a status here ??

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-02-18 22:45    [W:0.166 / U:1.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site