Messages in this thread | | | Date | Tue, 14 Feb 2006 04:48:31 -0500 (EST) | From | Justin Piszcz <> | Subject | LibPATA code issues / 2.6.15.4 |
| |
Jeff,
I'd have to double check but I do not recall getting these errors before the pass-thru code was introduced in 2.6.15, I also was not running the smart daemon until 2.6.15 for SATA drives as it was not supported.
I had a few issues before that I posted to LKML, those were due to too many SATA devices etc, everything is back to normal for the most part.
Speed, etc, all is well again, almost...
/dev/sdc: Timing buffered disk reads: 154 MB in 3.02 seconds = 50.97 MB/sec /dev/sdc: Timing buffered disk reads: 162 MB in 3.00 seconds = 53.94 MB/sec
The only issue I have is when I copy a lot of files to a WD 400GB drive I these pesky errors in dmesg:
ata3: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00 ata3: status=0x51 { DriveReady SeekComplete Error } ata3: error=0x04 { DriveStatusError }
Yet, everything copied (226GB) or so to the 400GB drive without a single I/O error that I am aware of. So my question is, why do I get these errors in dmesg if they are not critical?
Thanks,
Justin.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |