lkml.org 
[lkml]   [2006]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.6.19.1, sata_sil: sata dvd writer doesn't work
Hi folks,

I've got a problem with a Samsung SATA dvd writer: It
doesn't play video DVDs. If I connect the same drive
via an adapter to USB, then there is no such problem.


dmesg says:

ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (BMDMA stat 0x1)
ata2.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: model number mismatch 'TSSTcorpCD/DVDW SH-S183A' != 'ÑÅÌhõ³Nõ

This is reproducible.


lspci:
01:07.0 RAID bus controller: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01)
01:07.0 0104: 1095:3512 (rev 01)

/proc/scsi/scsi:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: TSSTcorp Model: CD/DVDW SH-S183A Rev: SB01
Type: CD-ROM ANSI SCSI revision: 05


I already asked Samsung's hotline for a firmware update,
but there is none available. They haven't heard of this
problem before, either. My wild guess would be that this
is a driver problem.

Kernels tried: 2.6.19.1, 2.6.18.3


What would be your suggestion to track down this problem?


Regards

Harri




[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2006-12-16 16:59    [W:0.121 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site