lkml.org 
[lkml]   [2006]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.6.18.3, sata dvd writer: can't watch dvd
Hi folks,

I've got a shiny new sata dvd writer: A Samsung SH-183A,
most recent firmware SB01. Writing data DVDs is _lightning_
fast, but I cannot watch my css-encrypted movie DVDs, even
with libdvdcss installed. If I try, then it becomes
unresponsive. dmesg says:

ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (BMDMA stat 0x1)
ata2.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: failed to IDENTIFY (device reports illegal type, err_mask=0x0)
ata2.00: revalidation failed (errno=-22)
ata2.00: disabled
ata2: EH complete
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
Buffer I/O error on device sr0, logical block 4
Buffer I/O error on device sr0, logical block 5
Buffer I/O error on device sr0, logical block 6
Buffer I/O error on device sr0, logical block 7
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1

After that the DVD drive is dead, waiting for a reset.
I tried this with 4 DVDs by now.

Watching my own DVD-Rs (created in a Philips HD recorder),
or commercial DVDs without CSS (e.g. "True Lies") is no
problem. The region code is set (2), of course.


Any idea? Unfortunately I cannot verify the drive in a
proprietary runtime environment.


Many thanx in advance.


Regards

Harri

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2006-12-13 23:27    [W:0.035 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site