Messages in this thread Patch in this message | | | Date | Sat, 14 Jan 2006 03:12:12 +0100 | From | Adrian Bunk <> | Subject | [2.6 patch] spelling: s/appropiate/appropriate/ |
| |
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
Documentation/cachetlb.txt | 2 +- Documentation/ioctl/hdio.txt | 2 +- Documentation/laptop-mode.txt | 2 +- Documentation/networking/sk98lin.txt | 2 +- Documentation/x86_64/boot-options.txt | 2 +- drivers/s390/scsi/zfcp_erp.c | 2 +- drivers/scsi/gdth.c | 2 +- sound/oss/opl3sa2.c | 2 +- 8 files changed, 8 insertions(+), 8 deletions(-)
--- linux-2.6.15-mm3-full/Documentation/cachetlb.txt.old 2006-01-14 02:19:46.000000000 +0100 +++ linux-2.6.15-mm3-full/Documentation/cachetlb.txt 2006-01-14 02:20:02.000000000 +0100 @@ -136,7 +136,7 @@ 8) void lazy_mmu_prot_update(pte_t pte) This interface is called whenever the protection on any user PTEs change. This interface provides a notification - to architecture specific code to take appropiate action. + to architecture specific code to take appropriate action. Next, we have the cache flushing interfaces. In general, when Linux --- linux-2.6.15-mm3-full/Documentation/ioctl/hdio.txt.old 2006-01-14 02:20:09.000000000 +0100 +++ linux-2.6.15-mm3-full/Documentation/ioctl/hdio.txt 2006-01-14 02:20:14.000000000 +0100 @@ -946,7 +946,7 @@ This ioctl initializes the addresses and irq for a disk controller, probes for drives, and creates /proc/ide - interfaces as appropiate. + interfaces as appropriate. --- linux-2.6.15-mm3-full/Documentation/laptop-mode.txt.old 2006-01-14 02:20:25.000000000 +0100 +++ linux-2.6.15-mm3-full/Documentation/laptop-mode.txt 2006-01-14 02:20:30.000000000 +0100 @@ -357,7 +357,7 @@ # Read-ahead, in kilobytes READAHEAD=${READAHEAD:-'4096'} -# Shall we remount journaled fs. with appropiate commit interval? (1=yes) +# Shall we remount journaled fs. with appropriate commit interval? (1=yes) DO_REMOUNTS=${DO_REMOUNTS:-'1'} # And shall we add the "noatime" option to that as well? (1=yes) --- linux-2.6.15-mm3-full/Documentation/networking/sk98lin.txt.old 2006-01-14 02:20:37.000000000 +0100 +++ linux-2.6.15-mm3-full/Documentation/networking/sk98lin.txt 2006-01-14 02:20:44.000000000 +0100 @@ -91,7 +91,7 @@ with (M) 5. Execute the command "make modules". 6. Execute the command "make modules_install". - The appropiate modules will be installed. + The appropriate modules will be installed. 7. Reboot your system. --- linux-2.6.15-mm3-full/Documentation/x86_64/boot-options.txt.old 2006-01-14 02:20:52.000000000 +0100 +++ linux-2.6.15-mm3-full/Documentation/x86_64/boot-options.txt 2006-01-14 02:20:57.000000000 +0100 @@ -198,6 +198,6 @@ Misc - noreplacement Don't replace instructions with more appropiate ones + noreplacement Don't replace instructions with more appropriate ones for the CPU. This may be useful on asymmetric MP systems where some CPU have less capabilities than the others. --- linux-2.6.15-mm3-full/drivers/s390/scsi/zfcp_erp.c.old 2006-01-14 02:21:04.000000000 +0100 +++ linux-2.6.15-mm3-full/drivers/s390/scsi/zfcp_erp.c 2006-01-14 02:21:08.000000000 +0100 @@ -3403,7 +3403,7 @@ /** * zfcp_erp_action_cleanup * - * Register unit with scsi stack if appropiate and fix reference counts. + * Register unit with scsi stack if appropriate and fix reference counts. * Note: Temporary units are not registered with scsi stack. */ static void --- linux-2.6.15-mm3-full/drivers/scsi/gdth.c.old 2006-01-14 02:21:15.000000000 +0100 +++ linux-2.6.15-mm3-full/drivers/scsi/gdth.c 2006-01-14 02:21:20.000000000 +0100 @@ -328,7 +328,7 @@ * hdr_channel:x x - number of virtual bus for host drives * shared_access:Y disable driver reserve/release protocol to * access a shared resource from several nodes, - * appropiate controller firmware required + * appropriate controller firmware required * shared_access:N enable driver reserve/release protocol * probe_eisa_isa:Y scan for EISA/ISA controllers * probe_eisa_isa:N do not scan for EISA/ISA controllers --- linux-2.6.15-mm3-full/sound/oss/opl3sa2.c.old 2006-01-14 02:21:27.000000000 +0100 +++ linux-2.6.15-mm3-full/sound/oss/opl3sa2.c 2006-01-14 02:21:34.000000000 +0100 @@ -530,7 +530,7 @@ if (hw_config->slots[0] != -1) { /* Did the MSS driver install? */ if(num_mixers == (initial_mixers + 1)) { - /* The MSS mixer is installed, reroute mixers appropiately */ + /* The MSS mixer is installed, reroute mixers appropriately */ AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_CD); AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_SYNTH); AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_LINE); - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |