lkml.org 
[lkml]   [2005]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch 2.6.14-rc2] siimage: enable interrupts on Adaptec SA-1210 card
The siimage driver proports to support the Adaptec SA-1210 SATA
controller. However, at least some of those cards boot-up with their
interrupts disabled internally. The siimage driver currently ignores
that fact, so that driver does not actually work with those cards. This
patch enables those interrupts on cards that need it.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
This is implemented based on similar code in the libata-based sata_sil
driver.

drivers/ide/pci/siimage.c | 9 +++++++++
1 files changed, 9 insertions(+)

diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -701,6 +701,7 @@ static unsigned int setup_mmio_siimage (
unsigned long barsize = pci_resource_len(dev, 5);
u8 tmpbyte = 0;
void __iomem *ioaddr;
+ u32 tmp, irq_mask;

/*
* Drop back to PIO if we can't map the mmio. Some
@@ -726,6 +727,14 @@ static unsigned int setup_mmio_siimage (
pci_set_drvdata(dev, (void *) ioaddr);

if (pdev_is_sata(dev)) {
+ /* make sure IDE0/1 interrupts are not masked */
+ irq_mask = (1 << 22) | (1 << 23);
+ tmp = readl(ioaddr + 0x48);
+ if (tmp & irq_mask) {
+ tmp &= ~irq_mask;
+ writel(tmp, ioaddr + 0x48);
+ readl(ioaddr + 0x48); /* flush */
+ }
writel(0, ioaddr + 0x148);
writel(0, ioaddr + 0x1C8);
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-09-28 23:54    [W:0.026 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site