Messages in this thread Patch in this message | | | From | Nicolas Christener <> | Subject | 2.6.13 doesn't find AGP device | Date | Thu, 1 Sep 2005 11:22:44 +0200 |
| |
On my machine, 2.6.13 doesn't detect my AGP ATI VGA card. 2.6.12.5 works just fine. However if I boot 2.6.13 with pci=biosirq the VGA card get's detected and works fine.
Suggestions, anyone?
Mainboard = Asus P4B VGA Card = Ati Rage 128 Pro
Kind Regards Nicolas
lspci:
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 03) 00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 03) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 12) 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12) 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 12) 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 12) 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 12) 00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 12) 02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02) 02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02) 02:0b.0 SCSI storage controller: Tekram Technology Co.,Ltd. TRM-S1040 (rev 01) 02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
diff -u of lspci -vvx:
--- lspci-2.6.12.log 2005-09-01 08:29:28.000000000 +0200 +++ lspci-2.6.13.log 2005-08-31 23:31:30.000000000 +0200 @@ -7,7 +7,7 @@ Capabilities: [e4] #09 [0104] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 - Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> + Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1 00: 86 80 30 1a 06 00 90 20 03 00 00 06 00 00 00 00 10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 70 80 @@ -23,7 +23,7 @@ Prefetchable memory behind bridge: f3f00000-f7ffffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- 00: 86 80 31 1a 07 00 a0 00 03 00 04 06 00 40 01 00 -10: 00 00 00 00 00 00 00 00 00 01 01 00 d0 d0 a0 22 +10: 00 00 00 00 00 00 00 00 00 01 01 00 d0 d0 a0 02 20: 80 f1 60 f2 f0 f3 f0 f7 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00 @@ -37,7 +37,7 @@ Prefetchable memory behind bridge: f2700000-f3efffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00: 86 80 4e 24 07 01 80 00 12 00 04 06 00 00 01 00 -10: 00 00 00 00 00 00 00 00 00 02 02 20 b0 b0 80 a2 +10: 00 00 00 00 00 00 00 00 00 02 02 20 b0 b0 80 82 20: 80 f0 70 f1 70 f2 e0 f3 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 @@ -66,7 +66,7 @@ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 - Interrupt: pin D routed to IRQ 19 + Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at a400 [size=32] 00: 86 80 42 24 05 00 80 02 12 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 @@ -89,7 +89,7 @@ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 - Interrupt: pin C routed to IRQ 23 + Interrupt: pin C routed to IRQ 17 Region 4: I/O ports at a000 [size=32] 00: 86 80 44 24 05 00 80 02 12 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 @@ -101,7 +101,7 @@ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 - Interrupt: pin B routed to IRQ 17 + Interrupt: pin B routed to IRQ 18 Region 0: I/O ports at 9800 [size=256] Region 1: I/O ports at 9400 [size=64] 00: 86 80 45 24 05 00 80 02 12 00 01 04 00 00 00 00 @@ -114,14 +114,14 @@ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), cache line size 08 - Interrupt: pin A routed to IRQ 11 + Interrupt: pin A routed to IRQ 20 Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M] Region 1: I/O ports at d800 [size=256] Region 2: Memory at f1800000 (32-bit, non-prefetchable) [size=16K] - Expansion ROM at f3fe0000 [disabled] [size=128K] + Expansion ROM at f3f00000 [disabled] [size=128K] Capabilities: [50] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 - Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> + Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1 Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- @@ -159,10 +159,10 @@ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 - Interrupt: pin A routed to IRQ 23 + Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at b800 [size=256] Region 1: Memory at f1000000 (32-bit, non-prefetchable) [size=4K] - Expansion ROM at <unassigned> [disabled] [size=64K] + Expansion ROM at f2720000 [disabled] [size=64K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- @@ -176,10 +176,10 @@ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2500ns min, 2500ns max), cache line size 08 - Interrupt: pin A routed to IRQ 20 + Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at b400 [size=128] Region 1: Memory at f0800000 (32-bit, non-prefetchable) [size=128] - Expansion ROM at <unassigned> [disabled] [size=128K] + Expansion ROM at f2700000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |